Printer Friendly

Cutting edge high-pressure coolant.

The CoroTurn is a high-pressure coolant system that offers improved chip control, increased cutting speed, and extended tool life in difficult materials, according to the manufacturer. CoroTurn HP partners with Coromant Capto to harness the high pressure capability of up to 1,100 psi in turning centers, vertical turning lathes, and multi-task machines. Via the turret or spindle, Coromant Capto coupling channels a high pressure coolant jet through small nozzles mounted close to the insert cutting edge. The resulting increase in velocity of the coolant jet produces a hydraulic wedge that lifts the chip from the material, reducing the temperature while improving chip control. The system's improved chip control also provides security for unmanned production in turning centers with high volume, automatic component changing, and multi-task machines where chips gathering around the tool prevent automatic tool changing. Sandvik Coromant

[ILLUSTRATION OMITTED]

www.rsleads.com/802mn-255
COPYRIGHT 2008 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2008 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:New Products
Publication:Modern Applications News
Date:Feb 1, 2008
Words:145
Previous Article:Heavier load indexer.
Next Article:Free 34-page marking equipment catalog.


Related Articles
Coolant-fed concept aids milling cutters.
Coolant system blasts chips, cutting theory.
Toolholding attachment cuts cycle times in half.
Achieve the speed.
Maximizing indexable insert Drills' performance requires careful selection and application. (Cutting Tools).
Dry Steel turning pays off with lower part costs, longer tool life. (Cutting Tools).
Coolant-through toolholder controls flow.
Four collaborate to produce die & mold high-speed success.
Coolant system.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters