Printer Friendly

Croda Inc. develops lipid-replenishing gel. (Formulary).

Here are product formulas supplied by producers of raw materials.

* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.

No guarantee of performance or safety is implied by Happi.

* For more complete details readers should contact the suppliers directly using the telephone number or website provided with each formula.

If your company has a formula that you think would be of interest to readers of Happi: marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:

Formulary Editor


70 Hilltop Rd.

Ramsey, NJ 07446 USA
Lipid-Replenishing Microemulsion
Styling Gel


Phase A
Incrocas 30 (Croda) 10.00
 (PEG-30 castor oil)
Volpo-10 (Croda) 10.00
Volpo-20 (Croda) 10.00
Mineral oil 10.00
Incroquat Behenyl 18-MEA (Croda) 1.00
 (behentrimonium methosulfate (and)
 quaterniem-33 (and) cetyl alcohol)
Cromollient SCE (Croda) 5.00
 (di-PPG-2 myreth-10 adipate)

Phase B
Deionized water 40.00
Glycerin 8.00
Propylene glycol 6.00

Combine ingredients of phase A and phase B
separately and heat each to 95[degrees]C. Slowly add
phase B to phase A with rapid mixing. Product
will become opaque at 80-85[degrees]C and then clear
when it cools to 65[degrees]C. On further hazy, but clears
again as room temperature is reached.

pH: 5.6 0.50
Set point: 50-55[degrees]C

Croda Inc., 7 Century Dr., Parsippany, NJ 07054-4698
Tel: (973) 644-4900; Fax: (973) 644-9222; Website:

Moisturizing Lipstick


Phase A
Luxsil (Presperse) 1.00
 (calcium aluminum borosilicate)
Beeswax (white) (Hansotech) 7.00
Candellila Wax (Frank Ross Co.) 7.50
Carnauba Wax (Strahl & Pitsch) 8.00
Permethyl 102A (Presperse) 13.00
Permethyl 104A (Presperse) 12.00
Ceraphyl 368 (ISP) 15.00
 (octyl palmitate)
Liponate TDTM (Lipo) 19.40
 (tridecyl trimellitate) 13.00
Eutanol G (Henkel/Cospha) 12.5
Lipovol CO (Lipo) 4.00
 (castor oil)

Phase B
Vitamin E Acetate (BASF) 0.30
 (tocopherol acetate)
Propylparaben USP (ISP) 0.20
Butylparaben (Protameen) 0.10

Combine phase A ingredients; heat to 85[degrees]C. Mix
well, until all waxes disperse uniformly or are
completely dissolved. Add phase B ingredients
in sequence to phase A at constant agitation.
Mix well. Pour at 80[degrees]C in appropriate molder.

Presperse Inc., 635 Pierce Street, Somersat, NJ 08873
Tel: (732) 356-5200; Fax (732) 356-8350; Website:

Water-Resistant Sunscreen
Lotion SPF 21 (In-Vitro)


Phase A
Deionized water 63.10
Versene NA (Dow) 0.05
 (disodium EDTA)
Carbopol Ultrez 10 Polymer (Noveon) 0.25
Pemulen TR-2 Polymeric Emulsifier 0.15
 (Noveon) (acrylates/C10-30 alkyl
 acrylate crosspolymer)
Propylene glycol 3.00

Phase B
NeoHeliopan, Type AV 3.00
 (Haarmann & Reimer)
 (octyl methoxycinnamate)
Octyl salicylate 3.00
HallBrite BHB (C.P. Hall) 5.00
 (butylocyl salicylate)
Parsol 1789 (Roche) 3.00
Procol CS-20 D (Protamean) 1.50
 (cetearyl alcohol (and) ceteareth-20)
Crodamol CAP (Croda) 2.00
 (cetearyl octanoate)
Vitamin E acetate (BASF) 0.50

Phase C
Crovol A-70 (CrodA) 0.50
 (PEG-60 almond glycerides)
DC 1401 Fluid (Dow Corning) 1.50
 (dimethiconol (and) cyclomethicone)
Ultrasil Copolyol-1 Silicone (Noveon) 1.50
 (PEG-8 dimethicone)
Phenonip (Clariant) 1.00
 (phenoxyethanol (and) methylparaben)
 (and) ethlparaben (and) propylparaben
 (and) butylparaben (and) isobutylparaben)
Tapioca Pure (National Starch) 4.00
 (tapioca starch)
Sodium hydroxide 18% 1.00
Avalure UR 450 Polymer (Noveon) 3.95
 (PPG-17/IPD/DMPA copolymer
 38% solids)

Dissolve disodium EDTA in warm water
(~50[degrees]C). Add Carbopol Ultrez 10 polymer and
allow to wet out for approximately five minutes.
Disperse Pemulen Polymeric emulsifier and
allow to mix in for about 15 minutes. Add
propylene glycol. Bring phase A to ~70[degrees]C. Add
approxiamately 15% of the total neutralizing
agent necessary to phase A. Blend phase B
ingredients and bring to -80[degrees]C, making sure
solid ingredients are dissolved. Add phase B to
phase A with vigorous agitation. Add PEG-60
almond glycerides. Add dimethiconol and
cyclomethicone. Add Ultrasil Copolyol-1 sislicone.
Ass Phenonip after the emulsion cools to
<60[degrees]C. Add tapioca starch. Add the remainder
of the neutralizing agent. Add Avalure UR 450

Appearance: white, creamy emulsion
pH: 7.0-7.5
Viscosity (mPa*s) **: 15,000-21,000
SPF (waterproof) ***: 21 (in-vitro method, 80
 min. immersion)
Stability: passed 45[degrees]C, accelerated--
 six weeks; passed freeze/thaw 5 cycles

** Brookfield RV spindle #6 @ 25[degrees]C, 20 rpm
*** This formulation has been SPF tested by
Innovative Measurement Solutions Inc., invitro
waterproof test: 80 minute immersion.

Noveon Inc., 9911 Brecksville Rd., Cleveland, OH 44141-3247
Tel: (800) 379-5389 or (216) 447-5000
Website: or
COPYRIGHT 2003 Rodman Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Household & Personal Products Industry
Date:Jun 1, 2003
Previous Article:Sweating can decrease job applicants' success.
Next Article:In-cosmetics attracts more than 4000 visitors. (International).

Related Articles
Moisturizing shower gel from midwest grain. (Formulary).
Lyondell Chemical develops Alkaline Hair Relaxer. (Formulary).
Sun protection cream developed by Degussa. (Formulary).
DHA lipid concentrate, wheat protein. (Suppliers Corner).
Croda launches new hair care ingredients.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters