Printer Friendly

Configurable locating pins.

Locating pins for jigs and fixtures are available in a range of styles: round or diamond shape, with or without shoulder, for set screw or nut fixing, in 4137/SCM415 steel or 304/440C stainless, with hardening or carburization surface treatments, as applicable. Pins are configurable in diameter, body, and shoulder in 0.1mm increments, as well as length in 1mm increments. Pins come in flat position, wrench flats, tip angle, relief at thread end, and shoulder top radius designs. Misumi USA, Inc.

[ILLUSTRATION OMITTED]

Visit www.rsleads.com/709mn-254 for more information
COPYRIGHT 2007 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2007 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:NEW PRODUCTS
Publication:Modern Applications News
Date:Sep 1, 2007
Words:93
Previous Article:Wedge design offers high clamping force.
Next Article:Lathe series displaces heat.


Related Articles
Medium-Size Toggle Line Gets a Thorough Overhaul.
PCI Mezzanine card.
Locking pin. (Mechanical).
Locking pin.
Modular biometric access.
Mentor's Expedition Enterprise: simultaneous team design using a common software, integrated flow.
Access Control.
Smart-card reader.

Terms of use | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters