Printer Friendly

Conductive fluoroplastic tubing.

This PTFE tubing is offered with a conductive ID that conforms to AMS-H-27267. It has a minimum conductance of 10 to 20 [micro]A with 1000 VDC applied over a 14-in. length. Designed to eliminate static charges affecting combustible fluid transfer as well as to prevent the build-up of static charges that might damage sensitive devices, it can be supplied in a variety of configurations in sizes from 1/8- to 4-in. ID.

TexLoc Ltd, Ft Worth, TX

Circle 224, or

COPYRIGHT 2005 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Electrical/Electronics: Wires, Cables & Connectors
Date:Apr 1, 2005
Previous Article:Cable wrap.
Next Article:Connectors: the PowerMod HP connectors feature touch-safe female housings, integral positive latches and cable strain reliefs.

Related Articles
Mobile enclosure. (Top Product).
Hot spots and heatsinks: because the time to uncover your board's steamy side is before it can fail the 'smoke test.'.
Quick steps to good launching.
Snagging the cables.

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |