Conditioning soft soap developed by Alzo.
* Included in some instances are sources of supply for the raw materials and instructions for preparation and use of the finished product.
No guarantee of performance or safety is implied by Happi.
* For more complete details readers should contact the suppliers directly using the telephone number or website provided with each formula.
If your company has a formula that you think would be of interest to readers of Happi. marketers of soaps & detergents; cosmetics & toiletries; waxes & polishes; disinfectants & sanitizers and other chemical specialties, we will be pleased to consider it for publication. Address all material to:
70 Hilltop Rd.
Ramsey, NJ 07446 USA
High-Foaming, Conditioning Soft Soap INGREDIENTS: % WT. Phase A Bioterge AOS 30.0 (alpha olefin sulfonate) Steol CS 230 10.0 (sodium laureth sulfate) Foamtaine CAB-G (Alzo) 10.0 (cocamidopropyl betaine) Dermowax EGDS (Alzo) 1.5 (glycol distearate) Polyderm PPI-SA (Alzo) 2.0 (di-PEG-2 soyamine/IPDI copolymer) Phase B Deionized water 42.5 Phase C Foamid C (Alzo) 3.0 (cocamide DEA) Phenobact (Alzo) 1.0 (phenonip) Fragrance q.s. Colorants q.s. Deionized water q.s. Citric acid q.s. (25% aqueous solution) (adjust pH to 5.5-6.0) PROCEDURE: Combine phase A in a suitable vessel equipped with heating and cooling. Begin mixing and heat to 70-75[degrees]C. Mix at temperature until uniform and for at least 15 minutes. Continue mixing; begin cooling and add phase B. Continue mixing and cool to 35-40[degrees]C. Continue mixing and add phase C. Continue mixing and cool to desired drop temperature. MORE INFO: Alzo International Inc., 650 Jernee Mill Rd., Sayreville, NJ 08872 Tel: (732) 254-1901; Fax: (732) 254-4423 BATH SHOWER GEL INGREDIENTS: % WT. Miracare 1673 (Rhodia) 50.0 (mixture) Fragrance, dye(s), preservative q.s. Sodium chloride 0.20-0.80 Water 49.5 PROCEDURE: Charge water into mixing vessel and heat to 45-50[degrees]C. With smooth agitation, slowly blend in Miracare 1673 and mix until completely uniform. Add compatible fragrance, dye(s) and preservative and adjust the formulation viscosity with the addition of sodium chloride as needed. PROPERTIES; Appearance at 25[degrees]C: clear, viscous liquid Viscosity at 25[degrees] C; 10,000-14,000 cps (RVT #4 spindle @ 10rpm) pH: 5.5-6.5 % Non-volatiles: 16.5-18.5 MORE INFO: Rhodia Home, Personal Care & Industrial Ingredients 259 Prospect Plains Road, Cranbury, NJ 08512 Tel: (609) 860-4000; Fax: (609) 860-0075 Website: www.hpcii.rhodia.com Long Wear Lipstick INGREDIENTS: % WT. Phase A Naturebead B20 (Presperse) 7.20 (carnauba (copermicia Cerifera) wax (and) beeswax) Permethyl 106A (Presperse) 2.00 (polyisobutene) Paraffin Wax SP 673 (Strahl & Pitsch) 2.00 (paraffin) Candellila Wax (Strahl & Pitsch) 2.40 Ganex WP-660 (ISP) 8.00 (tricontanyl PVP) Lipolan (Lipo Chemicals) 4.08 (hydrogenated lanolin) Salacos 99 (Ikeda America) 12.00 (isononyl isononanoate) Liponate TDTM (Lipo Chemicals) 5.00 (tridecyl trimellitate) Beeswax NF (Hansotech) 3.00 Permethyl 101A (Presperse) 15.15 (isohexadecane) Phase B Titanium Dioxide 50%/C0 (Tronox) 5.00 (titanium dioxide (and) castor oil) Cosmetic Brown Iron Oxide 33%/C0 2.10 (iron oxide (and) castor oil) D&C #7 CA Lake 33%/C0 3.40 (D&C Red No. 7 Calcium Lake (and) castor oil) D&C #6 BA Lake 33%/C0 7.62 (D&C Red No. 6 Barium Lake (and) castor oil) Phase C Propylparaben USP (ISP) 0.10 Tenox BHA (Eastman) 0.05 Azco Mica BC1-20 WG (Presperse) 9.50 (mica) Pearl 11 (Presperse) 0.50 (bismuth oxychloride) Phase D Permethyi 99A (Presperse) 10.90 (isododecane) PROCEDURE: Combine phase A materials in a suitable kettle. Start heating to 85[degrees]C under propeller mixer. Mix until all waxes are melted. Start adding phase B to phase A in sequence, while constantly mixing well. Start adding phase C to the batch one ingredient at a time, mixing well with each addition. Maintain the temperature at 85[degrees]C while the batch is constantly mixing for 15 minutes. Then start cooling to 75[degrees]C and add phase D to the batch. Pour at 75[degrees]C in an appropriate molder. MORE INFO: Prespere Inc., 635 Pirece Street, Somerset, NJ 08873 Tel: (732) 356-5200; Fax: (732) 356-8350; Website: www.prespere.com All-Purpose Cleanser INGREDIENTS: % WT. Phase A Tinosan HP 100 (Ciba Specialty Chem.) 0.30 (hydroxydichlorodiphenyl ether) Phase B Glucopon 215 CS UP (Cognis) 3.00 (alkyl polyglycoside) Texapon LS 35 (Cognis) 10.00 (lauryl-myristyl sulphate Na-salt) Sodium Cumene Sulfonate 5.00 (Hickson Manro) 2-Propanol (Merck) 0.30 (isopropyl alcohol) Phase C Perfume q.s. Preservativeq.s. Citric acid (Merck) adjust pH to 3.0 Water q.s. to 100 PROCEDURE: Stir phase A into the mixture of phase B ingredients. Add 70% of the water and ingredients in phase C. Complete to 100% with water. MORE INFO: Ciba Specialty Chemicals Corp., 4090 Premier Dr., High Point, NC 27265 Tel: (888) 396-2422; outside U.S.: (336) 801-2000; Fax: (336) 801-2020 E-mail: firstname.lastname@example.org Styling Gel with Conditioner INGREDIENTS: % WT. Phase A Deionized water 60.25 Carbopol Ultrez 21 Polymer (Noveon) 1.00 (acrylates/[C.sub.10-30] alkyl acrylate crosspolymer) Fixate G-100 Polymer (Noveon) 2.70 (AMP-acrylates/allyl methacrylate copolymer 26%) Phase B Ethanol 34.50 Crodasone W (Croda) 0.50 (hydrolyzed wheat protein PG-propyl silanetriol) Euxyl K 300 (Schulke & Mayr) 0.50 (phenoxyethanol (and) methylparaben (and) ethylparaben (and) propylparaben (and) butylparaben (and) isobutylparaben)123 AMP-95 (Dow) 0.55 (aminomethyl propanol) PROCEDURE: Sprinkle Carbopol Ultrez 21 Polymer onto the surface of phase A deionized water. When wetted, begin gentle agitation. Add Fixate G-100 Polymer. Mix until uniform. Add additional ingredients, mixing well after each addition. Add AMP-95. PROPERTIES: Appearance: clear gel pH: 5.8-6.3 Viscosity (mPa*s): 17,000-24,000 Brookfield RVT @ 20rpm, #6 spindle Clarity (%T): 88-92 Brinkmann PC 920 colorimeter, 420nm Stability: passed five cycles, freeze/thaw Fixate G-100 polymer solids (%): 0.70 MORE INFO: Noveon Inc., 9911 Brecksville Rd., Cleveland, OH 44141-3247 Tel: (800) 379-5389 or (216)447-5000 Website: www.carbopol.com or www.personalcare.noveoninc.com Anti-Fade Post-Dye Conditioner INGREDIENTS: % WT. Phase A Deionized water 90.00 Crodazosoft DBQ (Croda) 2.14 (quaternium-91 (and) cetrimonium methosulfate (and) cetearyl alcohol) Crodacol S-70 (Croda) 3.86 (stearyl alcohol) Phase B DC 939 Emulsion (Dow Corning) 3.00 (amodimethicone (and) trideceth-12 (and) cetrimonium chloride) Phenonip (Nipa) 1.00 (phenoxyethano] (and) propylparaben (and) butylparaben (and) methylparaben (and) ethylparaben) PROCEDURE: Combine phase A ingredients with mixing and heat to 80[degree]C. Continue mixing and hold at this temperature for 10 minutes; cool to 55[degrees]C. Slowly add first ingredient of phase B, mixing well. Add second ingredient of phase B and cool to room temperature. Adjust pH to 5.5 if necessary. PROPERTIES: pH 5.5 +/- 0.5 Viscosity: 10,000 cps +/- 10% RVT spindle #3 @ 10rpm Broad Spectrum SPF Sunscreen INGREDIENTS: % WT. Phase A Deionized water 57.85 Carbopol 980 (Noveon) 0.30 (carbomer) Disodium EDTA (Dow Chemical) 0.10 Butylene glycol 4.00 Phase B Escalol 557 (ISP) 7.50 (octinoxate) Escalol 567 (ISP) 6.00 (oxybenzone) Escalol 517 (ISP) 2.00 (avobenzone) X-Tend 226 (ISP) 10.00 (2-phenylethyl benzoate) Prolipid 141 (ISP) 4.00 (glyceryl stearate (and) behenyl alcohol (and) palmitic acid (and) stearic acid (and) lecithin (and) lauryl alcohol (and) myristyl alcohol (and) cetyl alcohol) Phase C Deionized water 5.00 Triethanolamine 99% 0.40 Phase D Liquapar Optima (ISP) 1.25 (phenoxyethanol (and) methylparaben (and) isopropylparaben (and) isobutylparaben (and) butylparaben) Liquapar Oil (ISP) 0.40 (isopropylparaben (and) isobutylparaben (and) butylparaben) Lexguard 0 (Inolex) 1.00 (caprylyl glycol) Phase E Glycacil-L (Lonza) 0.20 (iodopropynyl butylcarbamate) PROCEDURE: Combine ingredients in phase A; mix until uniform and heat to 75[degrees]C. Combine ingredients in phase B; heat to 75[degrees]C. Combine phase B with phase A with homogenization, Combine phase C with phase A/B with homogenization. Cool to 45[degrees]C (heat Lexguard 0 and add to LiquaPar Optima) and add phase D. Add phase E. Cool to room temperature. Qs for water loss. PROPERTIES: Viscosity: 17,600 cps MORE INFO: ISP, 1361 Alps Road, Wayne, NJ 07470 Tel: (973) 628-4000; Fax: (973) 628-4067; Website: www.ispcorp.com Emulsifier-free Light Face Cream INGREDIENTS: % WT. Phase A Cosmedia SP (Cognis) 1.0 (sodium polyacrylate) Deionized water 88.0 Phase B Cetiol CC (Cognis) 5.0 (dicaprylyl carbonate) Cegesoft PS 6 (Cognis) 5.0 (E.U.: Oils) (non-E.U.: vegetable oil) Copherol F 1300 (Cognis) 1.0 (tocopherol) Phase C Perfume q.s. Preservative q.s. PROCEDURE: Disperse Cosmedia SP in water and stir until homogeneous. Add deionized water while stirring. Mix phase B separately and add to phase A while stirring (or add the components of phase B one after another). Add phase C. PROPERTIES: pH: 6.3 Viscosity (mP*as): 137,500 Brook RVF 23[degrees]C sp. TE 4rpm with Helipath MORE INFO: Cognis Care Chemicals Division, 300 Brookside Avenue, Ambler, PA 19002 Tel: (800) 531-0815; Fax: (215) 628-1450; Website: www.cognis-us.com
|Printer friendly Cite/link Email Feedback|
|Publication:||Household & Personal Products Industry|
|Date:||Dec 1, 2003|
|Previous Article:||Pain sufferers turn to massage therapy.|
|Next Article:||U. of Maryland patents oral care composition.|
|DOW CORNING DEVELOPS CONDITIONING SHAMPOO.|
|Croda develops milky moisturizing body spray. (Formulary).|
|Seppic develops formula for cleansing wipes.|
|Sprayable sunscreen lotion from Rona/EMD.|
|Personal cleanser ingredients.|