Printer Friendly

Company successfully argues that it lacked fair notice of a travelway violation.

A safety manager for Aggregate Industries WRC was able to convince a Review Commission ALJ to vacate a citation issued under [section] 56.11012, where the company was able to prove that it lacked adequate or fair notice of the violation.

MSHA cited the company in March 2011, for not having a fall prevention barrier on an opening at the top of a ladder of an Arias Copco Drill. MSHA inspector David Grosek found the drill had an elevated platform that did not have a barrier across the ladder access, and the inspector found two openings on this platform that a person walking by could fall through. The first opening for the ladder access was 2 ft. wide. The second opening, on the other side of the drill, was 10 in. wide. The platform was 4 ft. above the ground.

The MSHA inspector testified that he believed previous inspectors had failed to cite an obvious hazard, and that a reasonably prudent person familiar with the mining industry would have known that this area should have been protected.

Grosek testified he was concerned that during inclement weather, the walkway could be slippery and a person could fall from the 4-ft. platform. While it was noted in the decision that the drill had gone through at least 30 MSHA inspections by several different inspectors, and no citation was ever issued for the two openings, the Secretary argued that while MSHA inspectors miss things, it does not excuse the mine from recognizing hazards and complying with standards.

The company's quarry supervisor, Robert Gentry, testified that the company had been using the drill since 1985. While the drill operator would walk past the opening once per shift, Gentry did not believe that someone would fall through the opening. While there was no "fall protection barrier" at the top of the ladder, Gentry believed that having a chain at the top of the ladder creates a hazard by forcing the miner to unhook the chain while on the ladder, exposing the miner to the risk of losing his grip and falling.

The company said a chain would also prevent the operator from leaving the drill cab area quickly in the event of an emergency. The company also noted there were similar conditions on other pieces of equipment, and the company was not cited in those instances.

ALJ Manning agreed with MSHA that there was a violation where there was the 2-ft. opening, but not the 10-in. opening.

The platform on the drill extending from the cab and along the side of the drill was a "travelway" and the drill operator walked along it at least once a day to check the fluid level in the radiator.

However, the second opening that was 10 in. wide was used to maintain the air compressor, and rarely accessed. The ALJ did not consider this area to be a "travelway" used by miners "to go from one place to another," and said it was highly unlikely that anyone could fall through that opening even if he tripped or stumbled, so this second opening did not violate the standard.

On the issue of adequate notice, ALJ Manning agreed with the company that it lacked fair or adequate notice of the standard, ruling that the two openings did not create an obvious hazard considering the fact the drill had been inspected on at least 30 occasions and the company was never cited. In addition, he agreed that MSHA had not cited a similar condition on at least one front-end loader at the quarry.

"Given these facts, the applicability of the safety standard to the cited openings was very ambiguous especially considering the history of enforcement at the quarry," Manning said. "There is nothing in the record that indicates Aggregate Industries knew or should have known that the unchained openings might be considered a violation of this safety standard. A reasonably prudent person familiar with the mining industry and the protective purposes of the .standard would have reached the same conclusion as Aggregate Industries."

While the citation was vacated in this instance, Manning said the company he was only holding that Aggregate Industries was not provided with the notice that is legally required to assess a civil penalty for violating the safety standard, but that the company has now been provided such notice and it is required to comply with the requirements of section [section] 56.11012 at the top of the ladder.

30 CFR [section] 56.11012

Protection for openings around travelways. Openings above, below, or near travelways through which persons or materials may fall shall be protected by railings, barriers, or covers. Where It Is impractical to install such protective devices, adequate warning signals shall be Installed.

Ellen Smith is the owner of Legal Publication Services, publisher of Mine Safety & Health News, She has been covering mining issues since 1987 and has won 31 journalism awards for her reporting, including the 2010 Magnum Opus Award for Outstanding Achievement in Custom Media. Ellen can be reached at 585-721-3211, or at
COPYRIGHT 2012 Mining Media, Inc
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2012 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Author:Smith, Ellen
Publication:Rock Products
Date:Aug 1, 2012
Previous Article:Double insulate yourself from danger.
Next Article:Belt Feeders.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters