A & A Magnetics
1033 Wanda Lane, Woodstock, IL 60098
Ph: (888) 605-6054. Fax: (815) 338-8590
Chris Klute, Sales
Manufacture a complete line of permanent magnetic assemblies, including pulleys, plates and overhead suspended separators.
A I C Solutions Ltd,
268 Bath Rd., Slough, Berks, UK SL1 4DX
Ph: +44 (780) 101-0111
Safety and protection systems for workers, balers, shredders and vehicles.
A T Equipment Inc.
25 Rockdale St., Worcester, MA 01606
Ph: (508) 595-9102. Fax: (508) 595-9103
ABCO Engineering Corp.
801 Second Ave. SE, Oelwein, IA 50662
Ph: (319) 283-5652. Fax: (319) 283-2600
David Hanson, Sales Engineer
ABCO Engineering Corp. designs, manufactures and sells conveyor systems and components. Products include conveyors, feeders, hoppers, screens, radial stackers, telescoping radial stackers, gates and belt plows.
ABM Equipment and Supply Inc.
333 Second St. NE, Hopkins, MN 55343
Ph: (952) 938-5451. Fax: (952) 938-0159
Email: scottr@abm-hig hway.com
Scott Reiserson, Sales Manager
Truck equipment dealer for the construction, refuse, recycling, demolition and compaction industries.
P.O. Box 38, 5541 N State Rd. 13,
Urbana, IN 46990
Ph: (800) 348-0717. Fax: (260) 774-3832
Joe Accetta, President
Abrasion resistant linings and pipes custom-engineered to extend life of bulk material handling equipment. Abresist basalt, Alresist alumina ceramic, Kalcor zirconium, and Kalrnetall chromium carbide. Also, Kalcret, sprayable, cast or trowellable hard compound, Kaflex, flexible pipe system, and Kalmetall-tc, tungsten carbide.
3600 S Harbor Blvd. No. 160, Oxnard, CA 93035
Ph: (800) 472-6921. Fax: (805) 644-4884
Distribute and make on-board scales for recycling and refuse applications--forklifts, roll-offs, front-end loaders and trailers.
Ace Demolition Inc.
3810 Crooked Run Rd., N Versailles, PA 15137
Ph: (412) 461-1160. Fax: (412) 673-9860
Sol Gross, President
Demolition of residential, commercial and industrial.
Ace Group LLC
3761 E Hwy. 12, Willmar, MN 56201
Ph: (888) 878-0898. Fax: (888) 310-2183
Supply and manufacture high-quality, low-cost replacement parts and new plant equipment components for the asphalt industry
Acme Construction Equipment Co.
P.O. Box 815, Novi, MI 48376
Ph: (248) 348-7774. Fax: (248) 348-7776
Gordon S. Gard, President; Julia Dudley, Office
Providing new and used parts and machines--American, Caterpillar, Koehring, LinkBelt and Atlas Cranes.
3357 S Justine, Chicago, IL 60608
Ph: (773) 523-4500. Fax: (773) 523-7283
Demolition scrap recycling service.
2750 S Shoshone, Suite 31 O, Englewood, CO
Ph: (303) 783-5448. Fax: (303) 783-5722
Offers sales and application help for processing equipment for C&D and recycling.
ACS Industries Inc.
2157 Mogadore Rd., Kent, OH 44240
Ph: (800) 321-2348; (330) 678-2571. Fax: (330)
Mel Schindler, Inside Sales Manager
Maker of attachments and coupler systems for wheel loaders, loader backhoes, excavators and dozers.
Action Equipment Co. Inc.
P.O. Box 3100, Newberg, OR 97132
Ph: (503) 537-1111. Fax: (503) 537-1117
Andrew LaVeine, President
Manufactures heavy-duty vibratory screening and processing equipment for the efficient handling of bulk materials. Action's installations can be found worldwide in foundry, aggregates, wood products, incinerator plants and recycling industries (C&D debris, commercial waste, wood wastes, MSW, scrap tires, scrap steel, etc.).
ADT Environmental Solutions
1400 SW Schaeffer Rd., W Linn, OR 97068
Ph: (877) 265-3395
Kenneth Pepperling, Managing Member;
Gordon Root, Member
ADT Environmental Solutions has developed a technology that will render hazardous heavy metals impacted soils, sludge, ashes and sediments non-hazardous at significant cost savings.
Advance Technical Sales Inc.
134 Painter St., Level Green, PA 15085
Ph: (412) 374-8880. Fax: (412) 374-9440
Rick Ochendowski, Sales Engineer
Manufacturers representative for Ohio Magnetics, Stearns Magnetics and Technical Weighing Services.
Advance Tire Inc.
1000 Somerset St., Bldg. 4B, New
Brunswick, NJ 08901
Ph: (800) 445-6647. Fax: (732) 524-7775
Industrial tire company specializing in loader and skid steer tires for severe applications such as demolition, recycling and waste transfer.
Advanced Biotechnology Inc.
P.O. Box 3637, Airdrie, AB, Canada, T413 2B8
Ph: (403) 912-7424. Fax: (403) 948-4780
Distributor of wood gasifiers for clean alternative heat energy
Advanced Detection Systems
4740 W Electric Ave., Milwaukee, WI 53219
Ph: (414) 672-0553. Fax: (414) 672-5354
Dave Smith, Sales Manager; Chuck Morgan,
U.S. manufacturer of conveyor-mounted metal detectors designed to ensure product purity and protect valuable processing equipment from tramp metal. Detects ferrous, nonferrous and stainless metals.
Advanced Recycling Equipment Inc.
850 Washington Rd., Saint Marys, PA 15857
Ph: (800) 611-6599; (814) 834-4470. Fax: (814)
Jim Babcock, VP Sales/Operations; Christine
Manufactures the Challenger waste reduction grinders in hopper and horizontal styles with over 70 models to choose from. We also manufacture the Challenger Thermal combustion units. These units can provide "warm air, " "hot water, " "steam" and "co-gen. "All equipment is manufactured in the U.S.A.
AET Consultants Inc.
133 Weber St. N, Suite 3-504, Waterloo, ON,
Canada, N3A 4K9
Ph: (519) 576-9723. Fax: (519) 570-9589
Larry Freiburger, Principa/Senior Environmental
Environmental consultants, technologists and scientists specializing in all aspects of construction & demolition recycling including: solid waste management planning, environmental monitoring, environmental assessments, building/site deconstruction, environmental management systems, waste composition/characterization studies, environmental compliance, waste diversion programs, recycling & reuse programs, site feasibility studies, material life cycle analysis, LEED design & construction, waste collection systems, public consultation and project management.
Aggregate Machinery Inc.
P.O. Box 17160, 3575 Blossom Dr. NE, Salem, OR
Ph: (503) 390-6284. Fax: (503) 390-6342
Aggregate sells C&D processing equipment.
Aggregates Equipment Inc.
P.O. Box 39, Leola, PA 17540
Ph: (717) 656-2131. Fax: (717) 656-6686
The bivi-TEC screen is used to make separations of 1/4"and finer in all types of compost, ranging from wood chips and yard trimmings to MSW and sludge.
1720 Feddern Ave., Grove City, OH 43123
Ph: (800) 803-3365. Fax: (800) 803-3364
David Gorrell, Regional Sales Manager
Factory-direct manufacturer of buckets, grapples, rakes, forks, thumbs and couplers.
Air One Inc.
P.O. Box 108, Sandwich, MA, 02563
Ph: (508) 759-0788; Fax: (508) 759-1176
Provides odor and dust control solutions specifically designed for the construction and waste industries.
5 Railroad PI., Maspeth, NY 11378
Ph: (718) 326-2433. Fax: (718) 326-7179
Aireactor sells composting equipment.
600 44th St. SW, Grand Rapids, MI 49548
Ph: (616) 538-9190. Fax: (616) 538-0449
Will Leistikow, VP Marketing
Supplier of all types of construction and demolition equipment.
Ajax Tool Works Inc.
10801 Franklin Ave., Franklin Park, IL 60131
Ph: (800) 323-9129. Fax: (800) 424-2529
Larry Smith, Regional Sales Manager
Ajax Tools is a leading American manufacturer of quality pneumatic, electric and hydraulic hammer accessories. Ajax hydraulic-boom mounted bits are manufactured for both strength and durability
Alan Ross Machinery Corp.
3240 Commercial Ave., Northbrook (Chicago), IL
Ph: (847) 480-8900. Fax: (847) 480-1830
For sale: used shredders, balers, magnets, dust collectors, screens, conveyors, cable strippers, excavators etc. at our Chicago warehouse.
Alexander Industrial Technologies Inc.
12 Parmenter Rd., Suite D6,
Londonderry, NH 03053
Ph: (603) 437-4777. Fax: (603) 432-9853
AIT designs, builds and services recycling facilities and sells equipment throughout the greater New England area.
P.O. Box 592, 14599 Second Ave.,
Ottumwa, IA 52501
Ph: (641) 682-4506. Fax: (641) 682-6294
Maker of car crushers, scrap metal balers, auto dismantling systems, hydrostatic loaders and landfill compactors.
Allain Equipment Manufacturing Ltd.
577 Rte. 535, Notre-Dame, NB, Canada E4V 2K4
Ph: (506) 576-6436. Fax: (506) 576-9890
Bruno Lagase, Commercial Director
Offers a wide range of products in the construction and demolition recycling industry. Manufactures customized stackers up to full turnkey C&D installations. Call Allain Mfg. for all your processing equipment requirements.
Allied Construction Products
3900 Kelley Ave., Cleveland, OH 44114
Ph: (216) 431-2600. Fax: (216) 431-2601
Al Springer, National Sales Manager; Laurie Deluca,
Internal Sales Support Manager
Designs, manufactures and distributes attachments for excavators, loader/backhoes, skid steers and mini-excavators, plus stationary breaking and material handling and underground piercing tools.
1640 Island Home Ave., Knoxville, TN 37920
Ph: (865) 573-0995. Fax: (865) 579-1028
Jerry Hatmaker, President; Wes Tankersley,
Materials handling equipment dealer, complete line, sales, service, rental, leasing, serving east Tennessee, southeast Kentucky, western part of Virginia.
2100 Poland Ave., Youngstown, OH 44502
Ph: (330) 744-0808. Fax: (330) 744-3218
John P. Ramun, Sales and Marketing; Mike
Ramun, Sales and Marketing
Allied-Gator Inc. is among the leading manufacturers of innovative material processing tools and equipment. Allied-Gator's MT[TM] Series attachment line, featuring the MT Series Multi-Tool[TM] and the MT Series Mag Extension[TM] is among the world's most versatile, functional and durable tool line available for shearing, concrete processing and material handling applications.
P.O. Box 888, 1502 W Fourth Ave.,
Holdrege, NE 68949
Ph: (800) 562-1373. Fax: (308) 995-5887
Marianne Chesterman, Advertising Manager
Established in 1938, the manufacturer of Allmand portable light towers, compact tractor loader backhoes, Port-A-Lite light stands, trailer mounted arrow boards and message boards job-site heaters.
861 Main St., Hackensack, NJ 07601
Ph: (201) 457-1003. Fax: (201) 457-3339
Alternative Resources Inc.
9 Pond Lane, Concord, MA 01742
Ph: (978) 371-2054. Fax: (978) 371-7269
Solid waste consultants experienced with feasibility, procurement, design and operations of recycling, composting, waste processing and waste-to-energy facilities.
1100 Holland Rd., Suffolk, VA 23434
Ph: (757) 539-0231. Fax: (757) 934-3264
Tiny Andrews, Industrial Sales Manager Manufactures hoppers heavy-duty disc screens and trommels. Also bagging and coloring machines for wood and rubber
American & Ohio Locomotive Crane
P.O. Box 511, 811 Hopley Ave., Bucyrus, OH 44820
Ph: (800) 993-6446; (419) 562-6010. Fax: (419) 562-2565
David Egner, Plant Manager; Craig Goodenough, Sales Manager
A division of ERS Industries Inc. Manufacturer and OEM for new American & Ohio Locomotive Cranes and OEM parts. Provides complete machine remanufacturing, crane capacity upgrades, on-site repairs and OEM locomotive crane inspections. Also manufactures the original hydraulic material handler on rail, the "Powers-tick, "and is a dealer for E-Crane International USA.
American Bin & Conveyor Inc.
221 Front St., Burlington, WI 53105
Ph: (800) 763-0125. Fax: (262) 763-0139
Custom designed conveyors, bins, hoppers and complete material handling systems.
American Carrier Equipment Inc.
2285 E Date Ave., Fresno, CA 93706
Ph: (800) 344-2174; (559) 442-1500. Fax: (559) 442-3618
Dave Sweet, Sales
Business Established: 1968. Manufacturer of transportation equipment: bulk solid waste hazardous waste sludge--using open top trailers, water tight sludge trailers, roll off truck and trailers for containerized transportation. This equipment is self loading and unloading.
American Hawk Bulk Waste Cranes
P.O. Box 5757, Trenton, NJ 08638
Ph: (609) 588-5400. Fax: (609) 588-4104
Fred Fisher, Sales Manager
Manufacturer of bulk cranes for curbside collection of brush, appliances and trash.
American Pulverizer Co.
5540 W Park Ave., Saint Louis, MO 63110
Ph: (314) 781-6100. Fax: (314) 781-9209
Skip Anthony, VP-Sales & Service; James
Holder, Sales Engineer
American Pulverizer manufactures a complete line of shredders and crushers for reducing automobiles, white goods, sheet iron, turnings, aluminum scrap, tires, glass, wire, cable, C&D wood, etc. Complete systems available.
P.O. Box 5757, Trenton, NJ 08638
Ph: (609) 588-5400. Fax: (609) 588-4104
Fred Fisher, Sales Manager
American Roll-Off manufactures single-axle, tandem-axle and tri-axle rolloff hoists for containers from 10 to 26 feet. Our Hook-All HookLift product line is designed for smaller single axle trucks and handles containers 10 ft-16ft.
American State Equipment Co. Inc.
P.O. Box 27306, 2055 S 108th St., Milwaukee, WI
Ph: (414) 541-8700. Fax: (414) 541-1892
Jim Drought, Senior VP
American State Equipment distributes cranes, hydraulic material handlers, excavators, mobile shears, wheel loaders and recycle crushers.
1502 E 122nd St., Burnsville, MN 55124
Ph: (952) 736-0525
Patty Field, Customer Service; Bonnie Novick,
AmeriMark Direct provides recycling graphics and concepts plus unique, imprinted items for recycling promotions featuring city, county, university and school recycling programs--all across the Americas. Free use of proprietary recycling logos on all products, plus value-pricing, help stretch important recycling education and conservation awareness dollars as far as possible.
AmeriMulch, Division of ChromaScape Inc.
6409 Granger Rd., Independence, OH 44131
Ph: (888) 556-3304. Fax: (216) 901-9116
Scott Thompson, VP-Sales
AmeriMulch manufactures colorants and equipment to produce high-demand colored mulches at a favorable cost.
Ampac Machinery Co.
P.O. Box 21077, 319 Hwy. 70 E Bypass, Durham,
Ph: (919) 422-5234. Fax: (919) 596-0073
Amsco Wear Products Inc.
P.O. Box 269, 289 W Main St., Goshen, NY 10924
Ph: (845) 294-1803. Fax: (845) 294-1657
Amulet Manufacturing. Co.
5640 W End Rd., Arcata, CA 95521
Ph: (707) 822-2282. Fax: (707) 822-1990
For over 20 years we have been providing the largest variety of thumbs in the industry. Other products include couplers, rakes, tilt buckets, rippers and ditch buckets.
Andela Products Ltd.
493 State Route 28, Richfield Springs, NY 13439
Ph: (315) 858-0055. Fax: (315) 858-2669
Andela Products Ltd. is a manufacturer of recycling equipment and systems for: glass pulverizing and commingled container separation systems; bottle, plate, mixed/broken glass and windshield glass reduced into a "sand" aggregate; CRT/TV glass reduction and recycling systems; and scrap gypsum board/drywall reduction and recycling systems. Pulverizers, breakers, trommel screen separators, surge hoppers and conveyors in custom designs for selective reduction and separation systems.
Anderson Equipment Co.
101 Great Arrow Ave., Buffalo, NY 14216
Ph: (716) 877-1992. Fax: (716) 877-1581
Richard Collins, Corp. Fleet Manager; James
McNeil, New York GM
Anderson Equipment distributes material handling/ process equipment including forklifts, skid steers, wheel loaders, etc. Anderson has 14 locations throughout 3 states.
Anderson Motors Inc.
170 Amarat St., E Providence, RI 02915
Ph: (401) 434-5900. Fax: (401) 431-2623
James E. Anderson, VP Sales
Offers line of construction trucks and trailers. Also demolition and recycling vehicles including parts, service and sales in the northeast region.
12890 Haggerty Rd., Belleville, MI 48111
Ph: (734) 697-8058. Fax: (734) 697-3544
Randy Moffat, VP Sales
Manufacturer of spectrometers for metals analysis and identification. Also provide spectrometer upgrades, service and refurbished systems.
17629 El Camino Real, Suite 410,
Houston, TX 77058
Ph: (800) 335-4722. Fax: (281) 480-8844
Larry A. Carlisle, VP
Manufacturer of grabs, grapples and clamshell buckets for cable, hydraulic and electro-hydraulic operation. Models for ships-gear, gantry, crawler cranes and hydraulic equilibrium cranes. Brands include Pro-Line, Hawco, Anvil, Owen, Yaun and Williams & Drott. New, used, rebuilds, repairs, parts and service, since 1905. Emergency repair service available.
Apex Drum Co. Inc.
6226 Ferguson Dr., Los Angeles, CA 90022
Ph: (323) 721-8994. Fax: (323) 721-1096
Sybil Flora, Office Manager; Noah Flom, Sales
We buy, sell and recycle 5 to 55 gallon steel, poly and fiber drums. We recondition steel and poly drums as well as IBCs. (DOT/U.N. approved.)
Apollo Equipment Inc.
2261 Country Club Rd., Woodburn, OR 97071
Ph: (800) 982-2844. Fax: (503) 981-3786
Dealer of used wood recycling equipment. Specialize in sales of wood recycling equipment and heavy equipment used in wood recycling.
Apollo General Insurance Agency
P.O. Box 1508, Sonoma, CA 95476
Ph: (707) 996-2912. Fax: (707) 996-7912
Demolition & recycling general liability, auto, equipment and umbrella coverage.
ARI Technologies Inc.
1221 Second Ave. N, Kent, WA 98032
Ph: (425) 391-0437
Dale Timmons, President
Provides innovative technology for the destruction and recycling of asbestos waste. ARI has also developed a method to recover and recycle lead from demolition debris contaminated with lead-based paint.
Arrowhead Rockdrill Co. Inc.
1550 State St., Barstow, CA 92311
Ph: (800) 984-3222; (760) 255-8990. Fax: (760) 255-8980
Robert J. Sherwin
Makers of hydraulic hammers, tools and wear parts utilizing European technology Also a maker of replacement breaker tools and wear parts to suit major makes and models of available hammer
Artech Reduction Tech
2794 S Sheridan Way, Oakville, ON,
Canada, L6J 7T4
Ph: (905) 829-1350. Fax: (905) 829-1535
Gary Klowak, Manager of Business Development.
ASGCO Manufacturing Inc.
301-323 Gordon St., Allentown, PA 18102
Ph: (610) 821-0216. Fax: (610) 778-8991
Ric Lehman, Peg Gibbs
Conveyor components and accessories.
P.O. Box 355, Homestead, PA 15120
Ph: (877) 937-2756. Fax: (412) 461-5400
Marty Palanti, Sales Manager--Scrap and Recycling
Since 1933, a global supplier of shear knives, blades, shims, hardware, liners and wear parts for the scrap, demolition and waste industries. Custom orders and large inventory for mobile and stationary shears.
Astec Mobile Screens
2704 W LeFevre Rd., Sterling, IL 61081
Ph: (800) 545-2125. Fax: (815) 626-6430
Ron Earl, VP of Sales and Marketing
Screening and recycling solutions for every application from crushed stone and recycled asphalt to top soil and industrial materials. We offer a full line of screening solutions including the PEP Vari-Vibe and Duo-Vibe line of high frequency screens.
840 Lily Lane, Grand Rapids, MN 55744
Ph: (800) 345-5954. Fax: (218) 327-2376
Del Carver, Director of Sales
Manufacturer of rubber track loaders.
Atlantic Screen and Manufacturing
142 Broadkill Rd., Milton, DE 19968
Ph: (302) 684-3197. Fax: (302) 684-0643
Pat Lawson, President; Jeff White, VP
Maker of slotted perforated and threaded pipe used for several applications.
Atlas Copco Construction Tools
37 Capital Dr., W Springfield, MA 01089
Ph: (800) 760-4049; (413) 746-0020.
Fax: (413) 746-5383
Email: email@example.com; firstname.lastname@example.org
Peter Bigwood, President
Atlas Copco Construction Tools is a division within the Atlas Copco Group's Construction and Mining Technique business area with headquarters in Stockholm. The company is a leading supplier of hydraulic, pneumatic and gasoline-powered breakers and drills, maketed under the Atlas Copco brand. Hydraulic and pneumatic breakers and drills are also marketed under the brand names Chicago Pneumatic and Shenyang.
Attachment Sales Inc.
P.O. Box 999, 2451 W State Rd. 44,
Deland, FL 32721
Ph: (386) 469-0020. Fax: (386) 469-0025
P.O. Box 141, Sutherland, VA 23885
Ph: (877) 887-1177. Fax: (888) 486-6655
9 Industrial Park Dr., Pelican Rapids, MN 56572
Ph: (218) 863-6444. Fax: (218) 863-6446
Garry Henry, President
Manufacturer of attachments for skid steer loaders, tractor/loader/backhoes, excavators, wheel loaders, articulated loaders.
2500 Windy Ridge Pkwy., Atlanta, GA 30339
Ph: (770) 226-9578. Fax: (770) 953-4844
Austin AI LLC
2101 Donley Dr., Suite 108, Austin, TX 78758
Ph: (512) 837-9400. Fax: (512) 837-9434
Providing custom and automated sorting/ separation systems for recycling. Sort via chemistry ID for maximum specificity. Non-destructive Energy Dispersive X-Ray Fluorescence (EDXRF) systems designed to minimize hazardous waste, maximize quality and provide liability assurance.
Austin Heavy Equipment
P.O. Box 119, 651 S Walnut, Suite F, New
Braunfels, TX 78130
Ph: (830) 964-2673. Fax: (830) 964-2629
A-Ward Attachments Ltd.
25 Roscommon Rd., Wiri, Auckland,
Ph: (866) 886-2999 (US).
Fax: +64 9 2777742
US Office: 263 10th St., 2A,
Jersey City, NJ 07302
Ph: (201) 697-7301
A-Ward Attachments manufactures a wide range of specialized excavator attachments used for downsizing materials like rebar and steel shears, wood shears, wire and rail shears, heavy-duty grapples and concrete pulverizer and cracking jaw which all mount on our pin connecting quick hitches, so they can be fitted in seconds. These products are used in the demolition, scrap and quarry industries.
B.E. Equipment Inc.
1775 Wentz Rd., Quakertown, PA 18951
Ph: (215) 536-0700; (410) 661-1333. Fax: (215)
Brenda Derr, Sales and Marketing Coordinator;
Tom Becker, VP Sales
Specializing in new, used and reconditioned recycling process equipment. Buy, sell, install and service the equipment.
Badger Shredding Products, Inc.
P.O. Box 200, Sturgeon Bay, WI 54235
Ph: (920) 746-9800. Fax: (920) 746-9801
The Badger Shredder is a twin-shaft, low-speed and high-torque primary shredder system. The machine processes concrete with fiber, mixed C&D asphalt, wood, plastic, even general waste. It is powered either diesel/hydraulic or electric/ hydraulic and can process up to 300 tons/hour.
Bandit Industries Inc.
6750 Millbrook Rd., Remus, MI 49340
Ph: (800) 952-0178. Fax: (989) 561-2273
Bandit manufactures a wide range of hand-fed tree and brush chippers with capacities from 6" to 18" in diameter long with a complete range of self propelled and towable chippers with chipping capacities from 18" to 24. "Bandit also manufactures a line of stump grinders and waste reduction machines called the Beast. A coloring attachment is available for the Beast units for making colored mulch in the final mulch grind. Beast Recyclers are available towable and self propelled.
Banner Environmental Recycling
P.O. Box 1008, Germantown, Wl 53022
Ph: (262) 253-2900. Fax: (262) 253-2919
Barer Engineering P.A.
515 Clifton Ave., Lakewood, NJ 08701
Ph: (732) 363-0714. Fax: (732) 363-0734
Established 1966. Construction safety and claims, demolition of buildings and manufacturing plants. Member: ACEC; AAEE (diplomat); NAFE (fellow); NSPE, National Safety Council, International Building Code; NJ Professional Engineer License. NJ License as Construction Official and Code Official and residential, commercial, residential, industrial building. Forensic Engineering, Mechanical Engineering, Chemical Engineering.
Barko Hydraulics LLC
P.O. Box 16227, Duluth, MN 55816
Ph: (715) 392-5641. Fax: (715) 392-3931
Dale Williamson, Inside Sales Manager
Barko Hydraulics manufacturers knuckle boom material handling with a wide range of capacities and boom lengths. Standard products include crawler, rubber-tired, stationary and tractor mounts.
Basic Machinery Co.
1220 Harold Andrews Rd., Siler City, NC 27344
Ph: (919) 663-2244. Fax: (919) 663-2172
Rod Tidy, Sales Rep.
The Basic Group manufactures a complete line of machinery and equipment servicing all bulk material handling industries worldwide, providing customers with standard and custom machinery for particular applications, as well as turnkey systems satisfying customer requirements.
15 Progress Drive, Orillia, ON L3V 6H1
Ph: (705) 326-4020. Fax: (705) 326-4727
Manufacturer of specialized attachments for equipment in construction, mining, forestry, demolition and metal recycling industries.
Bayhead Products Corp.
173 Crosby Rd., Dover, NH 03820
Ph: (603) 742-3000. Fax: (603) 743-4701
Gregg Moore, VP
Bayhead manufactures a line of heavy-duty plastic tilt trucks, self-dumping hoppers, poly-trucks and pallet containers used in the construction and demolition industry
801 Dayton Ave., Ames, IA 50010
Ph: (800) 232-5907. Fax: (515) 817-0752
Becker Underwood the leader in the landscape coatings industry offers innovative technologies to mulch producers around the world.
4143 Rider Trail N, Earth City
(Saint Louis), MO 63045
Ph: (314) 344-8500. Fax: (314) 344-8511
Dale Waltz, Director of Marketing; David Dicke,
Sales Manager, Beltwall Division
Beltservice is among North America's largest wholesalers and fabricators of conveyor belts with over 300 specifications in stock at five U.S. locations, plus Canada and Mexico subsidiaries. U.S. branches are in Philadelphia; Charlotte, NC, Sacramento, CA; and Portland, OR. Headquarters are in Saint Louis. The Beltwall Division of Beltservice Corp. is a leading manufacturer of cross-rigid corrugated sidewall conveyor belts, designed for steep angle lifting systems.
30383 Ecorse Rd., Romulus, MI 48174
Ph: (800) 521-4620; (734) 722-8100.
Fax: (734) 722-6662
Steve Doughty, Sales Manager
Manufacturer of trailer, roll off, dump and hook lift trailers, roll off containers, tarping systems, frame straightening. Parts and service are also available.
Berlyn Extruders Inc.
28 Bowditch Dr., Worcester, MA 01605
Ph: (508) 852-2233. Fax: (508) 856-9256
Maker of extruders and pelletizers for recycling. Also offer sheet profile and compounding equipment plus foam sheet lines.
Besco Sales Inc.
1160 W Trindle Rd., Mechanicsburg, PA 17055
Ph: (717) 691-7490. Fax: (717) 691-7495
Bob Rhoads, President
We work to reduce your waste removal costs and gain greater recycling income. Our 31 years of experience can work for you.
Billy Joe Glove & Safety Co.
175 Smoky Mountain Rd., Jackson, MO 63755
Ph: (573) 833-6001. Fax: (573) 833-6002
Terry Reid, Co-Owner; Loft Reid, Co-Owner
Since 1990, distributing gloves, safety supplies and equipment nationwide. Supplying industrial, retail and medical. All types of gloves, protective wear (including "Tyvek"), hard hats, rain suits, rubber boots (including "slush," "5 buckle," "steel toe" and "over-the-sock"), back support belts, safety glasses and much more.
Bilt-Rite Conveyors Inc.
141 Lanza Ave., Garfield, NJ 07026
Ph: (973) 546-1000. Fax: (973) 546-2539
Jeffrey Billig, President
Manufacturer of full line of standard parts and package handling conveyors. Quick shipment on slider bed, horizontal and incline belt conveyors. Flat-top chain, live roller, wire mesh and gravity roller are all available as standard units or as part of a complete system, stainless steel sanitary line.
BioMass Combustion Systems Inc.
67 Millbrook St., Suite 505, Worcester, MA 01606
Ph: (508) 798-5970. Fax: (508) 798-5971
Biomass Combustion Systems designs, manufactures and installs wood fired energy systems. These systems include new turnkey wood boiler projects up to 600 HP and modifications to existing wood boiler feeding, combustion and/or controls. BCS also manufactures wood fired hot air furnaces. These furnaces and boilers have been tested in the marketplace for over 20 years and rely on a design that is simple to operate, flexible, efficient and extremely durable.
Blades by Genesis
1000 Genesis Dr., Superior, WI 54880
Ph: (715) 395-3405. Fax: (715) 395-5255
Makes replacement blades for mobile shears. High-quality blades are cast from a proprietary steel and forged to provide extended cutting life and reduce operating costs, offering more durable and affordable shear replacement blades.
Rlawknox/Heppenstall Equipment (Division of Buffalo Tech Corp.)
750 E Ferry St., Buffalo, NY 14211
Ph: (716) 895-2100. Fax: (716) 895-8263
535 Mack Todd Rd., Zebulon, NC 27597
Ph: (919) 269-7421. Fax: (919) 269-0257
11001 Electron Dr., Louisville, KY 40299
Ph: (502) 736-5200. Fax: (502) 736-5202
Global producer of track crushers; jaw impactors and cone crushers.
BLS Enterprises Inc.
1115 Hilltop Dr., Unit B1, Itasca, IL 60143
Ph: (800) 307-0299. Fax: (630) 775-0903
Barry L. Stoughton
Supplier of polyurethane Tufpads track pads; rubber HQR Pads track pads; rubber Artliner-BLS clip-on and bolt-on track pads; and polyurethane and rubber backhoe stabilizer pads. Distributor of Bridgestone continuous rubber tracks and also supply BLS Poly Belt-On track pads, BLS Poly-MG trackpads. Distribute Protrac over-the-fire tracks, Bullman tires and Nyrim tracks.
BME Engineering Inc.
P.O. Box 849, 16 Carleton Dr.,
Georgetown, MA 01833
Ph: (978) 352-8202
Barry Enos, President
Manufacturer of waste equipment including roll-containers, roll-off hoists and specialty containers.
P.O. Box 6000, West Fargo, ND 58078
Ph: (866) 823-7898 ext. 765
Bobcat Company, a part of Ingersoll-Rand Compact Vehicle Technologies, is a leading provider of compact equipment, including skid-steer loaders, all-wheel steer loaders, compact track loaders, mini track loaders, compact excavators, the Toolcat utility work machine, utility vehicles, telescopic tool carriers, attachments and other equipment.
2276 London Rd., Smiithville, ON,
Canada, L0R 2A0
Ph: (800) 269-0257. Fax: (905) 957-4631
H. Talons, VP
Manufacture steel products i.e. metal shears, mini-grapples, thumbs, grapples, stump.
2000 Kentville Rd., Kewanee, IL 61443
Ph: (309) 853-3571. Fax: (309) 852-0350
Rex Perisho, Senior VP--Sales and Marketing
Bomag Americas Inc. is a leading manufacturer and marketer of compaction and road building equipment, including tampers, single-direction and reversible vibratory plates, trench compactors, single- and tandem-drum walk-behind and ride-on vibratory rollers, steel wheel rollers, pneumatic-tired rollers, asphalt pavers, recyclers/stabilizers, refuse compactors and milling machines.
2527 State St., Bettendorf, IA 52722
Ph: (800) 822-2693. Fax: (563) 355-4907
Dave Blount, Sales Manager; Tom Bowe, GM/VP
Bowe Knives manufactures industrial shear blades for the scrap recycling and demolition industry for all makes and models of stationary/mobile shears. As an OEM supplier for Texas Shredder, we manufacture, and repair complete rotor assemblies for waste, composting, and large scrap shredders.
Breaker Technology Inc. (BTI)
P.O. Box 130, 35 Elgin St. N, Thornbury,
ON, Canada N0H 2P0
Ph: (519) 599-2015. Fax: (519) 599-6803
Tom Witt, Director of Sales
U.S. Office: 30625 Solon Industrial Pkwy.,
Solon, OH 44139
Ph: (440) 248-7168. Fax: (440) 248-8645
Manufacturer and distributor of hydraulic breakers, demolition attachments, stationary and portable rock breakers and a full line of underground vehicles for mining, quarry, construction, recycling and demolition applications.
1424 Scale St., Canton, OH 44706
Ph: (800) 331-2424. Fax: (330) 453-2424
Christa Barnes, Marketing Specialist
Brechbuhler Scales, Inc. is supplier of full range of weighing equipment. Products offered include truck scales, rail scales, onboard weighing, belt scales and industrial weighing products.
Brock Rentals Inc.
1130 Village Way, Monroe, WA 98272
Ph: (866) 276-5548. Fax: (360) 794-3557
Broer Services Ltd.
702 Talbot St. W., Aylmer, ON, Canada, N5H 2V1
Ph: (519) 773-9261. Fax: (519) 773-2150
Manufacturer, since 1972, of processing equipment for the aggregate, recycling and specialty processing industries. Designs and builds systems and components for all of the above.
1144 Village Way, Monroe, WA 98272
Ph: (360) 794-1277. Fax: (425) 487-2963
Maker of remote-controlled confined space demolition equipment. Can be equipped with hydraulic breakers, buckets, grapples, etc.
Brown Bear Corp.
P.O. Box 29, Corning, IA 50841
Ph: (641) 322-4220. Fax: (641) 322-3527
Stan Brown, President
Manufactures both attachment machines and complete machines for windrow composting, bioremediation and stabilization, sludge drying and land application for liquids, sludge cakes and compost, as well as brush and tree shredding equipment.
Brown Transport Inc.
P.O. Box 6, 6387 State Rte. 122,
W Alexandria, OH 45381
Ph: (800) 226-1391; (937) 787-3512. Fax: (937) 787-4345
Micky Brown, President; Ron Smeltzer, Dispatch
Dry bulk commodities transporter serving Ohio, Indiana, Kentucky and the surrounding states. Also serve the recycling industry, moving scrap iron, scrap metals and other recyclables. Also transporter of demolition materials and debris.
Brunner & Lay
P.O. Box 1190, Springdale, AR 72765
Ph: (479) 756-0880. Fax: (479) 756-5366
Brunner & Lay Inc., manufactures one of the widest ranges of demolition tools in the U.S., for use with most types of heavy-duty, boom mounted breaker machines in use woldwide. Our range of tools include points, chisels, blunts, and other specialized working ends, and are available through our distributors and agents around the world.
Bryant Products Inc.
P.O. Box 270, Ixonia, WI 53036
Ph: (800) 825-3874; (920) 206-6920.
Fax: (920) 206-6929
Jody Mack, Purchasing/Executive Assistant
1510 Metric Ave. SW, Canton, OH 44706
Ph: (800) 266-8900. Fax: (330) 471-8909
Manufacturers of heavy-duty industrial weighing products.
3547 Perry Hwy., Hadley, PA 16130
Ph: (800) 233-0867. Fax: (724) 253-3863
Corey Sechler, Roll-Off Supt.; Dale Deist; Dennis
Bucks Fabricating has been manufacturing roll-off containers for well over 15 years, and is recognized throughout the industry for our excellent craftmanship, hefty components and stringent quality standards. At Bucks, we build a quality container for a competitive price and we offer a wide variety of options to meet all needs.
Bulk Equipment Systems Technology Inc. (B.E.S.T.)
1071 Industrial Pkwy. N, Brunswick, OH 44212
Ph: (330) 273-1277. Fax: (330) 225-8740
Ed Verbos; Tim Conway
Manufacturer of a full line of vibratory feeders, conveyors and screens for the recycling industry Other products include grizzly scalping units and component vibrators for bins, hoppers and chutes.
Bulk Handling Systems (BHS)
1040 Arrowsmith, Eugene, OR 97402
Ph: (541) 485-0999. Fax: (541) 485-8341
Eric Winkler; Lea Moser
BHS designs, manufactures and installs material recovery facilities for processing construction/demolition debris.
Bulldog Caster Co. Inc.
1011 Calle Amanecer, San Clemente, CA 92673
Ph: (800) 546-7655. Fax: (949) 369-8410
Arne Beckman, Co-Owner; Kurt D. Beckman, Co-Owner
Bulldog Caster offers a complete line of casters, wheels, roll-off rollers and a large variety of container repair parts.
Bunting Magnetics Co.
P.O. Box 468, 500 S Spencer Ave.,
Newton, KS 67114
Ph: (800) 835-2526. Fax: (316) 283-4975
Michael Wilks, Director of Marketing and Sales Count on Bunting Magnetics Co. to be your supplier of permanent magnets and magnetic equipment for the recycling and material handling industries. Bunting makes one of America's broadest lines of permanent magnetic metal separation and detection equipment--as well as a full line of conveyors and conveyor systems, lifting magnets and magnetic sweepers.
Burrows Enterprises Inc.
2024 E Eighth St., Greeley, CO 80631
Ph: (970) 353-3769. Fax: (970) 353-0839
Royal Burrows, President
Manufacturer of Roto Grind tub grinders and other specialty grinding, recycling and composting machines. Grinders for wood products, bark, paper, cardboard, leaves and composted finish grinding.
Buy-Rite Equipment Co. Inc.
3971 Independence Dr., Schnecksville, PA 18078
Ph: (610) 799-0500. Fax: (610) 799-0510
Nikolai Bashkirew; Pat Mitchell
Buy-Rite sells material handling products, racks, bins, containers and used equipment.
317 Enterprise St., Ocoee, Ocoee, FL 34761
Ph: (407) 877-2600. Fax: (407) 877-7064
Kris Creeden, VP
Callahan Fifth Wheel Hoists
P.O. Box 205, Royal City, WA 99357
Ph: (509) 346-2208. Fax: (509) 346-9203
Nancy Callahan, President; Kelly Callahan, VP
Callahan manufactures hoists.
2454 Stanwell Dr., Concord, CA 94520
Ph: (925) 356-3700. Fax: (925) 356-7956
George M. Savage, Executive VP
CalRecovery provides a wide range of consulting engineering services, including waste prevention and reduction, marketing analysis and design.
11010 NE 37th Cir., No. 100,
Vancouver, WA 98682
Ph: (888) 571-8352. Fax: (360) 993-1726
Provides vertical shaft impact crushing equipment to the aggregate and mining industries. Worldwide distribution and support network and large inventory provides support.
Cardinal Scale Manufacturing Co.
P.O. Box 151, 203 E Daugherty,
Webb City, MO 64870
Ph: (417) 673-4631. Fax: (417) 673-5001
Stephen Cole, Sales; Craig Fisher, Customer
Service; Fred Cox, VP--Sales
Cardinal Scale Mfg., established in 1950, makes scales and weighing systems for several industries, including the waste, transportation, powder/bulk, grain and feed and equipment industries.
P.O. Box 3097, Wilmington, NC 28406
Ph: (910) 799-6767. Fax: (910) 799-1177
Jon Leeds, VP
Carolina Software provides computer software services. Waste Works is a software program for landfills, transfer stations and recycling centers.
Cascade Container-Fab Co.
487 S 56th Pl., Ridgefield, WA 98642
Ph: (800) 628-8722; (360) 887-0733. Fax: (360)
Gary McLeskey, President; Bob Schultz,
Manufacturers and distributors of a full line of material handling and solid waste handling containers.
700 State St., Racine, WI 53404
Ph: (262) 984-5084. Fax: (262) 636-6826
Builds and markets several of the world's leading brands of construction and agricultural equipment and is among the world's largest equipment financing companies. Currently, more than 50 products carry the Case brand, in a lineup that ranges from compact trenchers and skid steers to high-power excavators and wheel loaders. Case construction equipment is available for sale, lease or rental in more than 150 countries through a comprehensive network of dealer/distributor outlets around the globe.
Cat Lift Trucks
2121 W Sam Houston Pkwy. N,
Houston, TX 77043
Ph: (713) 365-1000. Fax: (713) 365-1626
100 NE Adams St., Peoria, IL 61629
Ph: (309) 675-1000
Contact your local Caterpillar dealer Caterpillar manufactures front-end loaders, hydraulic excavators, backhoe loaders, skid steer loaders, track-type tractors, wheel loaders, work tools and trucks. Through the network of Cat dealers and the Cat Rental Store, Caterpillar supplies and supports a full line of products for handling materials for recycling.
Caterpillar Inc., OEM Solutions Group
100 NE Adams St., AH 9310, Peoria, IL
Ph: (309) 636-1100. Fax: (309) 636-1087
OEM Solutions Group is the solutions provider to OEMs who favor integrating with Caterpillar technologies and to serve customers where the Caterpillar distribution network is a valued differentiator.
CBT Wear Parts Inc.
13658 Hilltop Valley Rd.,
Richland Center, WI 53581
Ph: (888) 228-3625. Fax: (608) 538-3289
Mark Heffernan, President
CBT is one of the longest-running aftermarket parts suppliers to the compost and recycling industries for machines such as tub grinders, windrow turning machines, hammermills, wood hogs, trash balers, screeners, glass- breaking equipment etc.
CE Attachments Inc.
N 19W6721 Commerce St., Cedarburg, WI 53012
Ph: (866) 232-8224. Fax: (262) 387-1247
Complete line of attachments for skid steers, compact excavators and compact utility tractors. Severe duty and solid flex tires, and hydraulic hand held tools including paving breakers, concrete saws and pumps.
Ceilcote Air Pollution Control
14955 Sprague Rd., Suite 250,
Strongsville, OH 44136
Ph: (440) 243-0700. Fax: (440) 243-9854
John Tonkewicz, Director Sales and Marketing; Elena Repidonis
Provides equipment and custom systems for contaminant removal Featuring: corrosion resistant countercurrent and crossflow scrubbers for gas absorption, ionizing wet scrubbers (IWS) for gas and particulate control, low-vibration AMCA rated FRP fans, fluidized-bed scrubbers and high-efficiency Tollerette packing.
P.O. Box 420, Groveland, IL 61535
Ph: (309) 387-6591. Fax: (309) 387-6941
Central is an independent source for heavy industrial class material handling systems. The product line includes creative belt-style conveyors, oscillating/vibratory transfers, and stationary rotary (trommel) screens.
Century Wood Products
RR No. 3, OrLon, ON, Canada, L0N 1 NO
Ph: (519) 855-9559. Fax: (519) 855-6886
Bill Van Veen
Manufactures products from reclaimed lumber
Champion Motor Graders
8844 Mount Holly Rd., Charlotte, NC 28214
Ph: (704) 392-1038. Fax: (704) 394-0802
Bryan Abernathy, VP Sales and Marketing
Champion Motor Graders go where big graders can't but still take on the full range of grader jobs. Loaded with big grader features make sure that you get ROI. "Big Grader" operator stations, true all-wheel drive and a full range of attachments including front end loader, rotary broom, plate tamper and vibratory compaction roller make it indispensable.
P.O. Box 279, Humboldt, IA 50548
Ph: (515) 332-4045. Fax: (515) 332-4923
Steve Hartmann, Project Manager
Chantland-MHS manufactures belt conveyors for the package and bulk material markets with a furl line of bag filling and bag palletizing equipment.
Charles Licht Engineering Associates
P.O. Box 315, Olympia Fields,
Olympia Fields, IL 60430
Ph: (708) 798-0869. Fax: (708) 799-9908
Process and environmental engineering for secondary nonferrous smelters and scrap yards.
Chemswap.com, Div. of T.J. Banisch LLC
265 Durham Rd., Madison, CT 06443
Ph: (203) 245-8705
Tom Banisch, General Manager; Lorraine
Paneccasio, Accounting; Eileen Speed, Treasurer We are brokers/resellers of chemicals and equipment. Through an extensive network of customers, prospects, suppliers and sources, we are able to aid both buyers and sellers in finding and/or liquidating chemicals, inventories and chemical manufacturing and storage equipment.
Chem-Tainer Industries Inc.
361 Neptune Ave., W Babylon, NY 11704
Ph: (800) 275-2436; (631) 661-8300.
Fax: (631) 661-8209
Joe Maiello, VP Sales & Marketing
Manufacturer of plastic recycling containers and carts. Hundreds of shapes & sizes to choose from. Shipping from 10 factories nationwide. Saves time and money.
Cholmondeley Industrial Association Inc.
6500 Corporate Dr., Cincinnati, OH 45242
Ph: (513) 530-0700. Fax: (513) 530-9070
M. Cholmondeley, President; W. Jud, VP
Cholmondeley sells lifting magnets, magnet reels, magnetic controllers and generators.
4400 Austin Lane, White Plains, MD 20695
Ph: (301) 753-4100. Fax: (301) 753-4108
Judy Taylor; Shane Hurst
P.O. Box 914, Minden, LA 71058
Ph: (800) 562-5948. Fax: (318) 371-4369
Bill Garrison, VP Sales & Marketing
Clement Industries manufactures a complete line of dump trailers and roll-off trailers for the demolition and recycling industries. Clement products are sold and serviced throughout the United States and many parts of the world by a large network of authorized Clement dealers and is among the top five dump trailer producers in the world.
2828 Clinton Ave., Cleveland, OH 44113
Ph: (216) 241-7157. Fax: (216) 241-3480
Since 1923, Cleveland Vibrator has manufactured equipment for industries such as recycling, chemical, sand and gravel, plastics, glass, foundry, mining and special effects. We offer a line of vibratory bulk handling equipment, as well as air-piston and electric vibrators.
CLM Equipment Co. Inc.
3135 US Hwy. 90 E, Broussard, LA 70518
Ph: (337) 837-6693. Fax: (337) 837-3146
CLM is a construction equipment company, specializing in parts, sales, service and rentals in Louisiana & Texas.
CMI Terex Corp.
P.O. Box 1985, Oklahoma City,
Oklahoma City, OK 73101
Ph: (405) 491-2467. Fax: (405) 491-2385
P.O. Box 491, Garrettsville, OH 44231
Ph: (440) 338-1464. Fax: (440) 338-4592
3790 Commerce Ct., Suite 100,
Wheatfield, NY 14120
Ph: (800) 779-5648. Fax: (856) 779-0994
Lisa Bresolin, VP
Colmar USA manufactures heavy equipment for the scrap recycling, demolition, logging and railway industries. A leader in production as well as customer service, our innovative machinery includes balers, shear balers, loaders, our pioneering horizontal shear, new Eagle series and attachments.
Columbia Steel Casting Co. Inc.
P.O. Box 83095, Portland, OR 97283
Ph: (800) 547-9471. Fax: (503) 286-1743
A leading manufacturer of wear parts for crushers. impactors, hammermills and metal shredders. Wear parts for crushers include special jaw dies for recycling asphalt and concrete slabs. Wear parts for metal shredders include: hammers, rotor caps, grates, side liners, kick-out doors, reject doors, front wall conversion kits, cast feed rolls with stub shafts, rotors, bearing housings and more. Receive better wear parts with improved design and optimized alloy selection to meet your specific needs. A growing number of long-lasting cast grapple links available. All wear parts manufactured in Portland, Oregon U.S.A.
Commercial Metals Co.
P.O. Box 1046, Dallas, TX 75221
Ph: (214) 589-2770. Fax: (214) 689-5886
Provider of scrap metal recycling services.
Compact Power Inc.
P.O. Box 40, Fort Mill, SC 29716
Ph: (800) 476-9673. Fax: (803) 548-2762
Lisa McCarley, Sales
Maker and distributor of compact utility equipment including the Boxer, and PowerHouse Equipment line. Specializing in both wheeled and tracked loaders for contractors, rental houses, golf courses, municipalities, nurseries and others.
4805 Scooby Lane NW, Carroll, OH 43112
Ph: (740) 654-5304. Fax: (740) 687-9130
Brad Hutchinson, Owner; Gary Greckler, President
Cleveland Branch: 525 Golden Oak Pkwy.,
Oakwood Village, OH 44146
Ph: (440) 439-4567. Fax: (440) 439-1789
John Rowland, Cleveland Branch Manager
Sales, rentals, parts and service of Terex, LaBounty, Stanley, Gehl, Allied, Terex Fuchs, Seram, Rotobec, Rockland, Geith, Moxy, Big Tow, Beka-Max, Multi Quip, and Wacker. We specialize in shear machines, hammer machines, high reach machines, material handlers, universal precision machines and grapple machines.
Complete Recycling Solutions LLC
1 Father DeValles Blvd., Fall River, MA 02723
Ph: (866) 277-9797
Keith L. Boyea, Director
Complete Recycling Solutions LLC (CRS) provides recycling services for all fluorescent lamps, lighting ballasts, computer electronics and CRTs, mercury devices and batteries. CRS provides empty packaging and transportation services.
708 Marks Rd., Suite C, Valley City, OH 44280
Ph: (330) 273-2003. Fax: (330) 225-9672
Brian Hannis, Sales Manager
Manufacturer of quality steel-hinged, combination beaded pan and special conveyor belts for OEM and end-user. High quality belting at low cost.
Concept Products Corp.
16 Industrial Blvd., Suite 110, Paoli, PA 19301
Ph: (610) 722-0830. Fax: (610) 647-7210
Steve DiMascio, VP
Concept Products has introduced its new Shred-All 5600 Series portable grinder producing mulch that is ready to color in one pass. The Shred-All 5600 is small enough to be towed by a pick-up truck.
Construction Equipment Co.
18650 SW Pacific Hwy., Tualatin, OR 97062
Ph: (503) 692-9000. Fax: (503) 692-6220
Gary Smith, President
Manufacturer of screen plants and rock crushing plants.
Container Management Services LLC
P.O. Box 8367, Emeryville, CA 94662
Ph: (800) 406-9377. Fax: (510) 271-6215
Rob Conrad, Account Manager;
Jim Bise, Regional Manager
Steel drum and pail manufacturer and reconditioner/disposal of IBCs (intermediate bulk containers).
Continental Biomass Industries Inc.
22 Whittier St., Newton, NH 03858
Ph: (603) 382-0556. Fax: (603) 382-0557
CBI provides wood waste processing equipment used throughout the world, Portable or stationary systems are available to meet every need as well as custom-designed systems. CBI offers a complete line of grinders, screeners and wood shears and mixed C&D systems. Used equipment is always available.
Continental Conveyor & Equipment Co.
438 Industrial Dr., Winfield, AL 35594
Ph: (205) 487-6492. Fax: (205) 487-4233
Manufactures conveyor components and systems for various bulk materials handling industries. Components include idlers, impact beds, pulleys, slide seals and other conveyor products.
Continental Tire North America Inc.
1800 Continental Blvd., Charlotte, NC 28273
Ph: (704) 583-8818
Controlled Demolition Inc.
2737 Merrymans Mill Rd., Phoenix, MD 21131
Ph: (410) 667-6610. Fax: (410) 668-6624
Building implosion services.
Converto Manufacturing Co. Inc.
P.O. Box 287, Third and Green St.,
Cambridge City, IN 47327
Ph: (765) 478-3205. Fax: (765) 478-1223
Maker of roll off hoists, lugger hoists, lugger containers, Ram-E-Jec push out trailers for hauling sludge.
The Conveyor Co.
1200 Ninth Ave., Sibley, IA 51249
Ph: (712) 754-4661. Fax: (712) 754-2200
Designer and manufacturer of custom bulk material handling systems, including belt conveyors for the aggregate and mining industry with process control systems, fine and coarse material washers, vibrating screens, classifiers, portable screening plants and belt alignment systems.
1000 E Atlantic Blvd., No. 17,
Pompano Beach, FL 33060
Ph: (954) 788-7711. Fax: (954) 788-6611
Corru-Shredder can instantly convert OCC into Corru-Fill, a new loose fill material for packing and shipping.
Coyote Loader Sales Inc.
6721 Chittenden Rd., Hudson, OH 44236
Ph: (330) 650-5101; (330) 656-5525.
Fax: (330) 650-5105
Steve A. Kabay, Sales Manager
Since 1984, Coyote Loader Sales Inc. has distributed the highest quality wheel loaders, backhoe loaders, mini excavators and other construction equipment.
CP Manufacturing Inc.
1300 Wilson Ave., National City, CA 91950
Ph: (619) 477-3175. Fax: (619) 477-2215
Hans Ouellet, Sales Engineer; Dirk Kantak, Sales Manager
A leading designer and manufacturer of recycling equipment and systems in the world market. We design, build and install MRF's specializing in systems to process single-stream curbside material Have been in the recycling equipment business for over 30 years and stayed in the forefront of our industry through an ongoing, concerted R & D effort.
Crane Equipment Manufacturing Corp.
33740 Seavey Loop, Eugene, OR 97405
Ph: (541) 746-9681. Fax: (541) 746-8928
Mike Kogutkiewicz; Carol Roberts
Manufacturer of Grizzly knuckleboom cranes and solid waste grapple/tampers.
Crown Equipment Corp.
44 S Washington St., New Bremen, OH 45869
Ph: (419) 629-2311. Fax: (419) 629-3796
Dave Helmstetter, Publicity
Manufactures electric lift trucks, ranging from pallet trucks to very narrow aisle reach and turret trucks.
Crusher Rental Sales Inc.
600 N Airport Rd., Cedar City, UT 84720
Ph: (435) 586-2672. Fax: (435) 865-0616
Larry Eilers, Factory Sales Rep.
Exclusive manufacturer of the CrushBoss Horizontal Shaft Impactor, sales and rentals of complete turn-key crushing plants.
2650 Chattahoochee Dr. NW, Suite 500, Duluth,
Ph: (770) 270-8904. Fax: (770) 270-8858
Johann Schmidt, President
Crushtek LLC manufactures and distributes a full line of mobile track-mounted crushing and screening equipment, featuring impact and jaw crushing configurations. Crushtek crushers are engineered for optimum output, while maintaining compact dimensions without adding excess weight or compromising productivity
1850 E North St., Crown Point, IN 46307
Ph: (219) 226-1111. Fax: (219) 226-1112
Service facility providing cryogenics processing as a method to increase the life and durability of replacement parts and tools.
CW Mill Equipment Co. Inc.
see listing for HogZilla Grinders
Cycle Chem Inc.
201 S First St., Elizabeth, NJ 07206
Ph: (908) 355-5800. Fax: (908) 355-3495
Michael Persico, President; Rick Otto, GM
Treatment, storage and disposal of hazardous and non-hazardous waste.
D & B Fabricators & Distributors Inc.
16WO65 Jeans Rd., Lemont, IL 60439
Ph: (630) 325-3811. Fax: (630) 325-3780
John De Young, Sales Manager
Offers a full line of trailers for construction and demolition needs, including roll-off, lugger and scrap trailers; full service and repair.
Dade Capital Corp.
118 E Third St., Suite A, Perrysburg, OH 43551
Ph: (800) 823-9688; (419) 931-9000. Fax: (419)
Dade Capital has been providing equipment financing exclusively for the salvage, recycling and waste industries for the past 21 years. Our rates are competitive with any bank and we understand the industries and equipment.
2360 E Devon Ave., No. 2006,
Des Plaines, IL 60018
Ph: (847) 699-1323. Fax: (847) 699-1022
Dallas Contracting Co. Inc.
1260 New Macket Ave., S Plainfield, NJ 07080
Ph: (908) 668-0600. Fax: (908) 668-0601
Has been in business for 25 years. Offers complete turnkey service, including demolition, concrete crushing, rigging, used equipment sales and scrap metal recycling.
Daltec Industries Ltd.
204 Hayes Ave., Guelph, ON, Canada, N1E 5V5
Ph: (519) 837-1921
Warren DiMarco, Sales Manager--OEM
Makes OEM and custom centrifugal and axial fans servicing industries throughout North America.
Damascus Steel Casting Co.
P.O. Box 257, 1946 Blockhouse Rd. Run Ext., New
Brighton, PA 15066
Ph: (800) 920-2210; (724) 846-2770. Fax: (724)
Paul C. Cercone, Director of Sales
Damascus Steel Co. produces engineering components requiring impact, abrasion, corrosion and heat resistance. The company's castings are used in crushers, conveyors, pumps, mixers and dryers. Alloys include manganese steel, chrome iron, stainless steels, and nickel based alloys.
Dawson Coleman & Wallace Insurance Agency
596 Newark-Granville, Granville, OH 43023
Ph: (740) 321-1360. Fax: (740) 321-1369
Deister Electronics Inc.
1099 Kingston Rd., Suite 212, Pickering, ON,
Canada, L1V 1B5
Ph: (905) 837-5666. Fax: (905) 837-0777
Rikk Boldy, General Manager
Over the past decade, Deister Electronic has supplied transponders for more than one million waste bins and equipped hundreds of trucks with waste bin identification systems. Bitech is a second generation system designed specifically for identifying waste bins using RFID technology
Deister Machine Co. Inc.
1933 E Wayne St., Fort Wayne, IN 46801
Ph: (260) 426-7495. Fax: (260) 422-1523
Manufacturer of vibrating screens and feeders; family owned since 1912.
Demolition Industry Consultants
19136 Strand Court, Noblesville, IN 46060
Ph: (800) 440-3366. Fax: (317) 776-3574
With over 80 years of knowledge and experience, Demolition Industry Consultants provides on-site demolition training workshops in estimating, marketing, project supervision, and general business management. Estimating services include budget estimates, feasibility studies, document preparation and cost to complete. Litigation support services include expert witness testimony, claims preparation and management. Employee recruiting, development of company policies, including: safety, termination, management and supervisory duties and responsibilities.
Detcon Refuse Equipment
5039 Industrial Rd., Farmingdale, NJ 07727
Ph: (732) 938-2211. Fax: (732) 938-9674
Chris Larsen Jr., Director of Sales; Jay Brown,
Sales and service of refuse, recycling, demolition and composting equipment--rear load packer bodies--front end loaders--roll-off hoists--roll-off compactors--hook lifts--compost mixers--load luggers--tarp systems.
Detroit Stoker Co.
1510 E First St., Monroe, MI 48161
Ph: (800) 786-5374; (734) 241-9500.
Fax: (734) 241-7126
Matt Hoffman, Senior Manager of Aftermarket Sales
Complete line of combustion equipment for firing of solid, liquid or gaseous fuels. Stokers, burners, feeders, air systems, ash receiving equipment, parts, service, engineering, upgrades, rotary seal feeders.
Diamond Z Manufacturing
11299 Bass Lane, Caldwell, ID 83605
Ph: (800) 949-2383. Fax: (208) 585-2112
Randy Dodd, Marketing Director
A global manufacturer of industrial tub grinders, horizontal grinders, solid waste grinders, trommel screeens and recycling solutions. Diamond Z sets the industry standard for productivity, reliability, durability, serviceability and ease of maintenance.
5032 E Cochise Rd., Paradise Island, AZ 85253
Ph: (480) 926-0666. Fax: (480) 926-2680
Dings Co. Magnetic Group
4740 W Electric Ave.,
Milwaukee, WI 53219
Ph: (414) 672-7830. Fax: (414) 672-5354
Harold Bolstad, Sales Manager
For more than 100 years, Dings has manufactured a complete line of electro and permanent magnetic separators for separating ferrous and nonferrous metal from ore, aggregate and many other materials. Products include stationary and self, cleaning overhead magnets, heavy media separators, drum separators, magnetic head pulleys, grate and plate magnets and magnetic sweepers. Dings also manufactures eddy current separators for the recovery of aluminum and other nonferrous metals. All Dings electromagnet cores are wound with anodized aluminum strap for extended operating life and higher magnetic strength, while permanent magnetic separators feature Dings' DFC design for a stronger, more consistent magnetic field.
4015 S Howick, Salt Lake City, UT 84107
Ph: (801) 268-3500. Fax: (801) 261-1311
Manufacturers representatives for levels of solid and liquids flow systems, temperature control and heat trace systems.
P.O. Box 66, Perry, OK 73077
Ph: (580) 336-4426. Fax: (580) 336-5823
Jerri Kannenwischer, PR Manager
The Ditch Witch organization specializes in the design and manufacture of high-quality underground construction equipment. The company is a one-stop source for trenches, vibratory plows, pneumatic piercing tools, backhoes, Subsite[R] electronic tracking and locating tools, horizontal directional drilling systems, drill pipe, downhole tools, vacuum excavation systems, mini excavators and mini skid steers.
842 Buschong, Houston, TX 77039
Ph: (281) 219-1800. Fax: (281) 219-0505
Domatex is a fabricator and manufacturer of roll-off containers, trailers and hoppers. It has been serving the scrap, environmental and waste industries for the past 15 years.
Dome Corp. of North America
5450 East St., Saginaw, MI 48601
Ph: (989) 777-3456. Fax: (989) 777-3477
Doosan Infracore America
2905 Shawnee Industrial Way, Atlanta, GA 30024
Ph: (770) 831-2200. Fax: (770) 831-0905
1030 Jaycox Rd., Avon, OH 44011
Ph: (440) 937-3225. Fax: (440) 937-3411
Doppstadt US offers a full line of slow-speed shredders, high-speed grinders, trommel screens and commercial composting equipment, engineered for maximum performance in applications such as C&D debris reduction, MSW waste management, wood and green waste processing and other highly demanding operations. Available as tracked, wheeled or stationary units, powered by diesel or electric motors, all machines are designed to fit seamlessly into any system. Products include fast set-up and component swapping, easy operation and mobility, and quick maintenance with minimal downtime. Doppstadt US provides service, support and parts fulfillment through its national network of dealers.
Doran Manufacturing Inc.
P.O. Box 147, 1230 870th St., Harlan, IA 51537
Ph: (712) 755-7980. Fax: (712) 755-7877
Randall J. Doran
Doran Manufacturing manufactures a complete line of engineered wear parts for all makes and models of tub and horizontal grinders, i.e. hammers, tips, rods and screens. We are the only manufacturer to offer post weld heat treatment as standard procedure, which will significantly increase your bottom line--Better Wear/Better Parts/
Double T Equipment Manufacturing Ltd.
P.O. Box 3637, 2 E Lake Way,
Airdrie, AB, Canada, T4B 2B8
Ph: (800) 661-9195. Fax: (403) 948-4780
Rey Rawlins, Sales Rep.
Designs and manufactures conveyors and conveying systems, self-propelled straddle windrow turners, aerated in-vessel composting systems, biofilters and soil washers for the composting and bioremediation industries.
Douglas Manufacturing Co. Inc.
300 Industrial Park Dr., Pell City, AL 35125
Ph: (205) 884-1200. Fax: (205) 884-1206
Paul Ross, VP
Manufactures pulleys, CEMAC and idler line, hot vulcanized drum and wing pulleys, permanent magnetic separators, belt take ups, belts, and take ups.
Dover Conveyor, Inc.
P.O. Box 300, 3323 Brightwood Rd.,
Midvale, OH 44653
Ph: (740) 922-9390. Fax: (740) 922-9391
Specialists in design, engineering and fabrication of conveyors and systems, combo-flites, steel belts, rubber belts, apron belts, sorting belts, MRF recycling systems, bucket elevators, pli-o-wall conveyors, trippers, feeders, deep mine emergency escape hoists.
Dressta North America
1327 Barclay Blvd., Buffalo Grove, IL 60089
Ph: (847) 537-4783. Fax: (847) 537-2873
Vladimir Rokvic, Business Admin.
Dressta North America manufactures crawler dozers, wheel loaders, crawler loaders and loggers. As the successor to Dresser and International Harvester, Dressta brand products carry the tradition of excellence in comfort, operability and reliability.
Dupont Abandoned Cable
4417 Lancaster Pike, CRP Bldg. 702, Wilmington,
Ph: (866) FUELOAD
Works with demolition contractors to arrange for site collection of abandoned cable, as required by National Electric Code mandates. Also manage the recycling of the cable.
P.O. Box 1940, Jamestown, ND 58402
Ph: (701) 252-4601. Fax: (701) 252-0502
Keith Hermanson, Industrial Sales; Al Goerhring,
Marketing Manager; Bob Strohm, Sales Manager Dura Tech Industries manufactures a complete line of industrial tub and horizontal grinders, tub sizes range from 9 to 12 ft and hp ratings from 325 hp to 950 hp. All grinders feature microprocessor controlled clutches, enclosed engine compartments, and self cleaning rotary air intake screens, larger units have oscillating unloading conveyors.
Dust Control Systems & Equipment Inc.
7356 Hwy. 1187, Mansfield, TX 76063
Ph: (817) 572-6868. Fax: (817) 478-7575
Dust Control Technology
1604 W Detweiler Dr., Peoria, IL 61615
Ph: (309) 693-8600. Fax: (309) 693-8605
Dust Control Technology is among the leaders in dust control solutions in the industrial market. Creator of the DustBoss, an innovative automatic dust controller. Proven in tough jobsite environments to virtually eliminate dust complaints. The variety of applications is endless.
E Crane International
236 S Sandusky Ave., Suite 3, Bucyrus, OH 44820
Ph: (419) 566-1445. Fax: (419) 563-0074
Eagle Crusher Co. Inc.
P.O. Box 537, Galion, OH 44833
Ph: (800) 253-2453. Fax: (614) 468-4840
Jay Giltz, Team Eagle Sales
Eagle Crusher Company of Galion, Ohio, manufactures a broad range of portable crushing plants, bareshaft, skid-mounted horizontal shaft impact crushers and jaw crushers for the aggregate recycle markets. The UltraMax[R] impactor produces high quality product at a lower cost per ton, no matter the feed material--limestone, basalt, sand and gravel, heavily reinforced concrete or slabs of asphalt.
Eagle Foundry Co.
P.O. Box 250, Eagle Creek, OR 97022
Ph: (503) 637-3048. Fax: (503) 637-3091
Eagle Iron Works
129 E Holcomb Ave., Des Moines, IA 50313
Ph: (515) 243-1123. Fax: (515) 243-8214
Email: sakesand email@example.com
Aggregates processing equipment manufacturer.
Earthsaver Equipment Inc.
P.O. Box 7325, Kalispell, MT 59904
Ph: (406) 755-9611. Fax: (406) 755-9655
Specializing in wood recycling equipment since 1982.
East Manufacturing Corp.
1871 State Route 44, Randolph, OH 44266
Ph: (888) 405-3278. Fax: (330) 325-7851
Charlie Wells, Director of Dump Trailer Products
East is the leading manufacturer of aluminum trailers. East dump and refuse trailers offer the ideal balance of strength and weight to optimize payload potential They save you more on the job, day after day, year after year, and retain maximum resale value.
EBCO--Environmental Bins & Containers
2101 SW 56 Terrace, Hollywood, FL 33023
Ph: (954) 967-9999. Fax: (954) 967-9900
We are manufacturers of rear-loading 1 to 8 yards, front loading containers 1-8 yards, and roll off containers, 10, 20, 30 and 40-yard.
Eco Waste Solutions Inc.
6-5195 Harvester Rd., Burlington, ON,
Canada, L7L 6E9
Ph: (905) 634-7022. Fax: (905) 634-0831
Jean Lucas, Business Development Director
Eco Waste Solutions is a growing environmental technology company focused on point-of-need waste management solutions. Eco Waste Solutions has pioneered thermal treatment technologies for solid and liquid wastes, yielding practical and patented solutions that have saved our customers great expense while adhering to strict environmental compliance regulations.
79 N Pearl St., Albany, NY 12207
Ph: (518) 434-1227
Ed Champagne, Sales Manager
Eco/Technologies LLC is a subsidiary of Energy Answers Corp. of Albany, New York. Eco/ Technologies is a developer and marketer of products and technologies for the recycling and waste-to-energy industries.
Elrus Aggregate Systems
4409 Glenmore Trail SE, Calgary, AB,
Canada, T2C 2R8
Ph: (403) 279-7741. Fax: (403) 236-5151
Steve Pegler, Sales Manager
Manufacturers of portable equipment for the mining and aggregate industries. Full product line includes jaw and cone crushers, screening plants, feeder screen plants, belt feeders, surge bins, conveyor systems, control towers and trailers with electrical packages. Modular equipment features "common level" design with a minumum of loose conveyors. Fully stocked parts department and service shop.
Ely Enterprises Inc.
3560 w 140th St., Cleveland, OH 44111
Ph: (216) 252-8090. Fax: (216) 252-5607
Ely Enterprises offers sales and service for both new and used equipment specializing in the paper recycling, solid waste field and ferrous and nonferrous processing industries. Full turnkey capabilities with a fully stocked parts department and 24 hour on-call service response time.
Emery Winslow Scale Co.
73 Cogwheel Lane, Seymour, ET 06483
Ph: (203) 881-9333. Fax: (203) 881-9477
David Young, Sales Manager; Rudi Baisch, VP Sales
Manufacturer of tank, truck, floor, bench, railroad track scale systems and scales for custom applications. Our exclusive Hytronic[TM] technology combines electronic instrumentation with virtually indestructible Hydrostatic[TM] load cells for a system with no electronics in the area of greatest potential abuse--the scale platform. Our Hydrostatic[TM] load cells are guaranteed for fife against failure from water and lighting.
Energy & Environmental Concepts
325 S Spruce, Traverse City, MI 49684
Ph: (231) 947-4632. Fax: (231) 947-5635
Steven Kopacki, Owner/President
Energy & Environmental Concepts strives to educate, promote and consult on the most energy efficient and environmentally safe products including products made from 100% post-consumer waste.
Enterprising Europa Inc.
439 Rte. 17 N, Mahwah, NJ 07430
Ph: (201) 236-0969. Fax: (201) 584-0229
Roland Jarl, VP
Importer and sales of Gallmac Multi purpose Tool Carriers, the most innovative and cost savings equipment ever made. Buy one and get at least five different machines: excavator, front end loader, crane, man rift and material handler. EEI-Socomec Hydraulic Hammers, the most innovative and quietest hammer in the market, 60 months warranty, only 2 moving parts, easy and economical to repair, energy recovery and more.
102 E Broadway, Madison, MO 65263
Ph: (888) 255-6422
Judy Harmon, Sales; Lisa Wood, Sales
Specializing in new and pre-owned environmental equipment including tub and horizontal grinders, deck and trommel screens, compost turners and coloring units.
Environmental Air Solutions
1482 High Country Rd., Coralville, IA 52241
Ph: (319) 358-7794. Fax: (319) 248-0345
Mike Stibal, President
We manufacture an Air-To-Air Heat Exchanger. We can provide ventilation without losing heat. We recycle your existing heat in the winter and provide fresh air in the summer.
Enviro-Pak Compactors/Tech Oil Products
4308 W Admiral Doyle Dr., New Iberia, LA 70560
Ph: (337) 367-6165. Fax: (337) 367-9956
Chris Dupuy, Office Manager
Manufacturers of offshore marine compactors, general waste compactors, hazardous waste compactors, recycled waste compactors, filter crushers, drum crushers and galley grinders. Home of Recycle The Gulf, an award-winning cooperative endeavor to improve the environment by recycling waste from offshore operations.
2285 Stewart Ave., Suite 1307,
Saint Paul, MN 55116
Ph: (800) 472-0453. Fax: (651) 690-1942
Ivan Jacobs, President
Buy and sell used material handling excavators, shears, balers, lifting magnets, grapples and wheel loaders.
Equipment Leasing Ontario Ltd.
9 Red Pine Ct., RR No. 2 Shanty Bay, ON,
Canada, L0L 2L0
Ph: (705) 737-9222. Fax: (705) 737-5336
John Mounstephen; Ryan Mounstephen
Equipment leasing for Ontario, Canada. Financing Moveable assets over $100,000.
The Equipment Lock Co.
P.O. Box 1692, Hedgesville, WV 25427
Ph: (304) 754-5900. Fax: (304) 754-0059
Bryan Witchey, VP Sales and Marketing
The Equipment Lock Co. (TELC), West Virginia-based company manufactures and sells universal anti-theft and safety devices for heavy equipment. TELC's diverse product line mechanically immobilizes the drive controls for skid loaders, backhoes, excavators, trucks, and more.
2200 Asbury Rd., Erie, PA 16506
Ph: (814) 835-6000. Fax: (814) 838-4960
From its world headquarters in Erie, Pa., Eriez manufactures and markets a full line of permanent and electromagnetic separators, vibratory screeners, pan feeders and conveyors, as well as erium-powered ferrite and rare earth eddy current separators. Call on Eriez' expertise with applications involving the latest electrostatic separation.
1 Ave. Premier, Riviere-du-Loup, QC,
Canada, G5R 6C1
Ph: (800) 267-7574. Fax: (418) 882-6642
Howard Fiedler, International Sales Manager
US Office: 220 Industrial Way, Portland,
At the heart of every Erin Fixed C&D Recycling System, is Erin's patented finger screen technology. Erin offers everything from straighforward finger screen and sort-lines to more comprehensive systems integrating grinding, crushing, secondary star screening, ferrous removal, multiple conveyors etc. Erin design systems to fit in existing buildings, in newly constructed buildings, or outside--as needs and space dictates.
P.O. Box 3358, Kingston, NY 12402
Ph: (845) 331-4552. Fax: (845) 339-1063
Bill Kearney; Greg Haver
Manufacturer of high grade filtration and separation equipment and media for utility and waste water applications.
2141 NW 25th Ave., Portland, OR 97210
Ph: (503) 228-2141. Fax: (503) 242-9037
Edgewood Close, Crowthorne, Berks RG45 6TA UK
Ph: + 44 (0) 1344-477708.
Fax: + 44 (0) 1344-761649
Officially appointed distributor for Harris Waste Management Group's wide range of recycling equipment for ferrous and nonferrous materials. Also suppliers of a wide range of used / refurbished baling presses / shears / shredders.
P.O. Box 6416, 1213 Dorris Ave.,
High Point, NC 27262
Ph: (336) 885-1010. Fax: (336) 885-1011
Hans Zoellinger, President.; Mark Reid, Sales Manager; Frank Zoellinger, VP
Complete lines of machinery and equipment for wood and plastic recycling, as well as tire recycling, shredders and grinders with capacities up to 35 t/hr.
1003 McKnight Park Dr., Pittsburgh, PA 15237
Ph: (800) 966-4530; (412) 367-4530. Fax: (412)
Richard W. Theobald, President; Glenn D.
Theobald, Sales Manager; Robert Alderson, Controller
National distributor for ORTS/Lander grapples/ buckets and North American distributor for Kinshofer Crane Attachments, HGT crane/ excavator grabs and grapples.
15709 Arrow High Way, Zone 5,
Baldwin Park, CA 91706
Ph: (626) 337-8732. Fax: (626) 337-8191
Excel Machinery Ltd.
P.O. Box 31118, Amarillo, TX 79120
Ph: (800) 858-4002. Fax: (806) 335-3949
Manufactures stationary and portable systems for crushing aggregate, concrete, asphalt and C&D rubble. Also buys, sells and leases used crushing equipment.
P.O. Box 355, Essington, PA 19029
Ph: (610) 521-1448. Fax: (610) 521-0919
Distributor of Extec screening and crushing plants.
EZ-Screen/Argus Industrial Co.
18 W Huron St., Pontiac, MI 48342
Ph: (248) 745-5828. Fax: (248) 745-5825
Email: firstname.lastname@example.org; Al Skoropa
Portable screening plants.
5311 S 122nd East Ave., Tulsa, OK 74146
Ph: (918) 317-4100. Fax: (918) 317-4266
FW Murphy is an ISO 9001-registered manufacturer committed to providing innovative products and services for comprehensive equipment management and control solutions. The Murphy product line has evolved from its original world famous Swichgage[R] to include a broad range of engine and engine driven equipment controls and monitoring systems.
Fairfield Service Co.
205 W Center St., Marion, OH 43302
Ph: (740) 387-3335. Fax: (740) 387-4685
Fairfield specializes in waste water treatment equipment.
Falvey Steel Castings Inc.
3 Philips Rd., Holbrook, MA 02343
Ph: (781) 767-6210. Fax: (781) 767-6218
Frank B. Falvey Jr.
Supplier of replacement parts for impactors and crushing plants used by the recycling industry
3460 Grant Dr., Lebanon, OH 45036
Ph: (800) 528-3113
John Heekin, President
Fecon develops profitable solutions in the recovery and re-use of wood and organic materials with a full range of resource recovery equipment and systems. Product line includes horizontal grinders, satellite screens, mulch coloring systems, the Bull Hog wood shredder and specialty attachments for reforestation and remediation industries, as well as for the wood recycling industry and other segments of the recycling industry
FEECO International Inc.
3913 Algoma Rd., Green Bay, WI 54311
Ph: (920) 469-5100. Fax: (920) 469-5110
Feeco engineers, designs and manufactures municipal and industry waste recovery systems and equipment for wet and dry material. We also specialize in the manufacture of complete systems.
P.O. Box 122, 100 E Lee Rd., Lee, IL 60530
Ph: (800) 747-2132. Fax: (815) 824-2071
Peggy Simpson, Marketing Manager
Manufactures a complete line of attachments for skid steer loaders, backhoe loaders, small wheel loaders and utility loaders.
The Fibrex Group Inc.
3734 Cook Blvd., Chesapeake, VA 23323
Ph: (757) 487-5744. Fax: (757) 487-5876
Ruben Leenders, President
Fibrex manufactures a unique selection of innovative recycling containers, waste receptacles, dumpsters, benches, picnic tables, planters and bollards made from recycled rubber, plastic, fiberglass, steel and recycled plastic lumber. Our green design products are built to last, made from sustainable resources and always contain the maximum possible recycled content.
Field Gymmy Inc.
143 S Main St., Glandorf, OH 45848
Ph: (419) 538-6511. Fax: (419) 538-6365
Ken Elchinger; Dennis Nienberg
Field Gymmy custom makes specialty vehicles used for land application of soil-compatible waste. Vehicles have a high flotation industrial design required for field spreading of liquid and dewatered sludges and compost products, biosolids land applicant.
Fisher Pumps Inc.
2024 E Eight St., Greeley, CO 80631
Ph: (970) 353-6962. Fax: (970) 353-0839
Rich Helzer, Sales Manager
Maker of pump models, including: vertical style, floating style, PTO style and hydraulic style. For pumping applications in municipal liquid waste treatment, liquid manure waste, construction de-watering, mining de-watering, flood control, aeration and evaporation pumps and many other industrial applications.
2525 Wisconsin Ave., Downers Grove, IL 60515
Ph: (630) 971-0150. Fax: (630) 971-1180
Kris Zientek, Advertising Admin.
Founded in 1907, Flexco manufactures mechanical fastener systems for light-, medium- and heavy-duty conveyor belts. In addition, Flexco is a source for belt cleaners, belt trainers, pulley lagging, belt maintenance tools and other accessories that help keep productivity on a roll. Headquartered in Illinois/USA, Flexco products are available through a worldwide network of distributors.
Flexxaire Manufacturing Inc.
10430 180 St., Edmonton, AB, Canada, T5S 1C3
Ph: (780) 483-3267. Fax: (780) 483-5499
FM Industries Inc.
8600 Will Rogers Blvd., Fort Worth, TX 76140
Ph: (817) 293-4220. Fax: (817) 551-5801
49 North Video Productions
26-7040 Williams Rd., Richmond, BC, Canada,
Ph: (604) 232-1175
John Baumchen, Producer
Video production services to promote products or services, training videos, and documentary services using professional digital equipment.
Franklin Associates, A Division of ERG
4121--W 83rd St., Suite 108,
Prairie Village, KS 66208
Ph: (913) 649-2225. Fax: (913) 649-6494
William E. Franklin, Division Manager; Shelly Schneider, Sr. Environmental Scientist
Provides consulting services (studies) in solid waste including C&D. Customers are EPA, state and local governments, industry associations and private industry
Franklin Miller Inc.
60 Okner Pkwy., Livingston, NJ 07039
Ph: (973) 535-9200. Fax: (973) 535-6269
Leading manufacturer of size reduction equipment: shredders, crushers and grinders with an extensive application in the solid waste industry
Frog Switch & Manufacturing Co.
P.O. Box 70, Carlisle, PA 17013
Ph: (717) 243-2454. Fax: (717) 243-7768
Fuller, Ritchie & Sturgess Inc.
7403 Wolff Rd., Medina, OH 44256
Ph: (330) 722-0770. Fax: (330) 723-8447
Mark G. Langworthy, President
Sells C&D processing equipment, including conveyors/systems/accessories, grinders, material handling equipment, metals separations systems, screens, separation systems, sweepers/vacuums.
P.O. Box 220, 461 E Rosser Dr., Winamac, IN
Ph: (800) 285-0666. Fax: (574) 946-4579
Doug Podell, Inside Product Manager-Hoist
Products; Nancy Brandt, Inside Product Manager-Containers;
Kevin Bennett, Inside Product
Manager-Compactors & Balers
Galbreath Inc. is a leading producer of recycling, waste handling and material handling equipment. Galbreath products include a complete line of roll-off hoists, hook hoists, rolloff containers, stationary and self-containers, compactors, vertical balers, self-dumping hoppers and replacement parts. Galbreath operates facilities in Indiana, Alabama and Texas in addition to an extensive dealer and service network nationwide.
P.O. Box 39, Winamac, IN 46996
Ph: (574) 946-7767
1050 Locust Point Rd., York, PA 17402
Ph: (717) 767-6429
Brian Hollerbush, Sales Rep.; John Bixler, Shop Foreman; Gene Garrod, Owner
We remanufacture large bore and long stroke hydraulic cylinders like the ones used in the recycling industry We are a member of ISRI and are IS09000 certified. We can chrome plate rods up to 48 feet long in our new 65,000-sq. ft. facility. Garrod hydraulics has been in business since 1978.
Gator Machinery Co. Inc.
11020 Cherry Ave., Fontana, CA 92337
Ph: (909) 823-1688. Fax: (909) 823-6868
Larry Gustin, National Sales Manager;
Charles Wu, President
Manufacturer of high-quality, lower-cost crushing, screening, feeding and washing equipment and cross-belt permanent magnets and elctro magnets.
143 Water St., W Bend, WI 53095
Ph: (262) 334-9461. Fax: (262) 334-6689
Jennifer Neuber, Marketing Asst.
Manufacturer of compact equipment used worldwide in construction and agricultural applications. Founded in 1859.
22721 Airpark Dr., Petersburg, VA 23803
Ph: (800) 762-4090. Fax: (804) 733-3669
Maker of quality buckets and attachments for excavators, backhoes and loaders. Geith products include thumbs, couplers, grapples and crushers.
General Breaker & Attachments USA
14092 Slover Ave., Fontana, CA 92337
Ph: (909) 357-2411. Fax: (909) 357-1258
5050 Rickert Rd., Crystal Lake, IL 60014
Ph: (815) 455-3222. Fax: (815) 455-2285
Bill Guptail, Sales Manager; Gordon Frank, VP Sales and Marketing
General Kinematics vibratory solutions for recycling increase productivity and improve your recovery process. Our rugged designs can handle anything you throw at them and save you money in both energy and maintenance costs.
1000 Genesis Dr., Superior, WI 54880
Ph: (715) 395-5252. Fax: (715) 395-5255
Curt Helmen, Inside Sales Manager; David Palvere, Used Equipment Manager
Genesis designs and manufactures a line of hydraulic and mechanical attachments for scrap recycling and handling, demolition, reconstruction, water handling and other operations. Genesis Attachments include the New Logix Processor (LPX), XP Mobile Shears, DemoPro Concrete & Steel Processors, grapples, processors and the new Quick Coupling System with a full line of linkage tools.
Gensco Equipment Inc.
53 Carlaw Ave., Toronto, ON, Canada,
Ph: (800) 268-6797; (416) 465-7521. Fax:
US Office: 5307 Dividend Dr., Decatur, GA
Ph: (770) 808-8711. Fax: (770) 808-8739
Since 1919, a leading supplier to the scrap, demolition and recycling industries. Offers magnets, grapples, cable strippers, shredders, clamshell buckets, Dynaset Hydraulic accessories.
Gershman Brickner & Bratton Inc.
8550 Arlington Blvd., Ste. 203, Fairfax, VA 22031
Ph: (800) 573-5801; (703) 573-5800.
Fax: (703) 698-1306
Robert H. Brickner
Solid waste management consultant. Fleetroute route optimization software. Smartengine online waste audit and business recycling software.
Getz Recycle Inc.
2800 W Lincoln St., Phoenix, AZ 85009
Ph: (602) 278-7600. Fax: (602) 272-5668
Manufacture and sell crushing plants, conveyors, screens, feeders and recycling plants.
Giberson Enterprises, LLC
5 Park Dr., Shamong, NJ 08088
Ph: (609) 268-3451. Fax: (609) 268-1504
Larry Giberson, Owner/Operations Manager
Giberson Enterprises is the only distributor in America for the Eco-Crusher. This revolutionary excavator-mounted bucket jaw crusher combines portable and affordable crushing. The Eco-crusher will crush concrete, rock, block, brick and asphalt down to 1" minus on the site. Proven with more than 900 units working in Europe.
Gibson Machinery LLC
181 Oakleaf Oval, Oakwood Village, OH 44146
Ph: (440) 439-4000. Fax: (440) 439-5746
Bill Nittinger, Sales Manager; Lee Gibson, President
Gibson machinery is a provider of new and used equipment from scrap handlers and excavations to wheel loaders and paving equipment.
39 McBride Ave., Paterson, NJ 07026
Ph: (973) 279-5900
Fume oxidizers for odor removal
Global Equipment Marketing Inc., Magnetics Division
see listing for Magnetics Division
Global Equipment Marketing Inc., Shredder Division
P.O. Box 810607, Boca Raton, FL 33481
Ph: (561) 750-8662. Fax: (561) 750-9507
Marshall Gralnick, President
Full range of size reduction and sorting equipment, including mono-shear shredders, contra-shear shredders, horizontal-shaft hammermill shredders, twin roll crushers and can flatteners.
Global Equipment Marketing Inc., Wheelwash Division
see listing for Wheelwash USA
Golfco International Inc.
6311-143rd Ave. NE, Redmond, WA 98052
Ph: (425) 861-7755
Mike Margolies, National Sales Manager; Martin Doyle, President
Golfco International is the premier manufacturer of rollers for the golf course maintenance market. Golfco is now manufacturing industrial conveyor rollers. All rollers feature sealed, non-regreasable bearings.
Goodman Conveyor Co.
P.O. Box 866, 645 Floyd Wright Dr.,
Belton, SC 29627
Ph: (864) 338-7793. Fax: (864) 338-8732
Belt conveyors, components, screw conveyors components, drag conveyors and bucket elevators.
406 Mill Ave. SW, New Philadelphia, OH 44663
Ph: (330) 339-2211. Fax: (330) 339-8468
Michael Norman, Director of Excavator Marketing
Designer and manufacturer of telescoping boom hydraulic excavators on highway-speed-wheeled, on/off-road-wheeled and crawler undercarriages and related equipment.
Granutech Saturn Systems
201 E Shady Grove Rd., Grand Prairie, TX 75050
Ph: (972) 790-7800. Fax: (972) 790-8733
440 S Illinois Ave., Mansfield, OH 44907
Ph: (419) 526-4440. Fax: (419) 524-2176
Marian L. Ellenfeld, President
Designer and manufacturer of conveying, crushing, screening and recycling equipment.
Great Lakes Industrial Knife Co.
3261 Copley Rd., Akron, OH 44321
Ph: (330) 665-1200. Fax: (330) 665-1204
Ron Kara, President; Jeff Hinton, Sales
Manufacturer of industrial machine knives, sharpening service, hard casing.
Green Seal Environmental
28 Route 6A, Sandwich, MA 02563
Ph: (508) 888-6034. Fax: (508) 888-1506
Environmental consulting business focused on solid/hazardous waste disposal, health and safety and monitoring issues.
P.O. Box 680, S Prairie, WA 98385
Ph: (360) 897-9533. Fax: (360) 897-8923
Green Solutions provides solid waste and recycling consulting and is also the developer of the Business Recycling Cast Model, a tool to help businesses examine recycling and waste reduction costs.
265/1 Sangkongluang Rd., Soi 6, T.Wiang A.
Muang, Chiang Rai, Thailand CR 57000
Ph: +66 53756766
Philippe Marcais, Owner
Equipment for Thailand's recycling industry.
Greenberg Engineering Co,
P.O. Box 451, Bala Cynwyd, PA 19004
Ph: (610) 660-0655
Manufactures and sells cable strippers, iron detectors, Sortometers, molten metal pumps and mixers, melting kettles, molds, rotary furnaces. Consulting engineers on all aspects of nonferrous metal recycling.
Grueneveld Auto Greasing Systems
1089 Valentine Ave. SE, Pacific, WA 98047
Ph: (720) 220-8974. Fax: (303) 987-2930
Robert Vogel, Account Manager
Auto greasing systems made simple, we make sure the auto greasing systems works correctly, or we fix it free. Ask about a "free" trial on any type of equipment from route trucks to yellow iron to MRFs.
Gruendler Crusher--A Terex Co.
212 S Oak St., Durand, MI 48429
Ph: (989) 288-9263. Fax: (989) 288-4113
Manufactures and designs reduction equipment for a wide range of industrial needs, providing engineering and support to clients.
Gurman Container & Supply Corp.
800 N Third St., Terre Haute, IN 47807
Ph: (800) 448-7626. Fax: (812) 232-8345
Containers for industry.
Gypsum Drywall Reclamation Corp.
P.O. Box 890, Pflugerville, TX 78691
Ph: (512) 989-8177. Fax: (512) 251-2847
Jerry Petermann, President; Patrick Meehan,
Gyp Monsters are produced by the Gypsum Drywall Reclamation Corp. to eliminate the cost of landfill disposal of scrap drywall. Wallboard is disintegrated and can be disposed of on the jobsite as dirt or collected and sold as agricultural gypsum.
H & W Management Science Consultants
3 Charlotte Lane, Scarsdale, NY 10583
Ph: (212) 355-1448. Fax: (914) 725-7730
Henry C. Weber, President
Market research and forecasting studies in environmental energy and engineered equipment-related areas, new product technology development and consulting.
H. West Equipment Inc.
645 N Main St., Orange, CA 92868
Ph: (714) 289-7733. Fax: (714) 289-1776
Full-service distributor of C&D systems, including mobile, fixed and other recycling systems.
H.Q.N. Industrial Fabrics
760 Chester St., Sarnia, ON, Canada, N7S 5N1
Ph: (519) 344-9050. Fax: (519) 344-5511
Paul Hardy, President
Manufacturer of drawstring bag liners for waste containers such as roll-offs, dump trailers, RR gondolas. Raincaps for all containers, spout bags, bladder bags, dewatering bags, tarp covers.
Hagglunds Drives Inc.
2275 International St., Columbus, OH 43228
Ph: (614) 527-7400. Fax: (614) 527-7401
Manufactures low-speed, high-torque hydraulic motors.
Hale Trailer Brake & Wheel
P.O. Box 1400, Voorhees, NJ 08043
Ph: (800) 232-6539. Fax: (856) 768-7671
Stan Wilt, Sales Manager; Barry Hale, President
If it walks, we rent it, sell it, repair it or have parts for it. New and used aluminum and steel walking floor trailers, sludge dumps, vans, flatbeds, reefers, storage vans, dump trailers, trailer vans.
Hallco Manufacturing Co. Inc.
P.O. Box 505, Tillamook, OR 97141
Ph: (503) 842-8746. Fax: (503) 842-8466
Barbara Hurliman, Marketing Manager
One of the most efficient ways to move refuse and recyclables is with Hal/co Live Floor equipped trailers and stationary conveyors. These bidirectional slat floors can turn any transfer trailer into a highly efficient self-unloader. When used in transfer stations, material recovery facilities and waste-to-energy plants, Hallco Live Floors are safer and easier to maintain than chain or belt conveyors.
Hammel New York LLC
194 Morris Ave., Suite 16,
Holtsville, NY 11742
Ph: (219) 929-5824. Fax: (219) 921-0980
Gert Semler, Managing Partner
The Original and the Red Giant, slowspeed/high torque dual-shaft shredders, German engineered and manufactured, designed for tough American waste, wood and C&D market. Screening equipment, high-speed secondary shredders and entire plants. Designed to have the lowest operating cost and to be the most efficient. Four primary sizes from 8 t/h to 200 t/h.
4754 E State Rte. 40, Tipp City, OH 45371
Ph: (937) 667-4488. Fax: (937) 667-5864
14713 Carmenita Rd., Norwalk, CA 90650
Ph: (562) 926-2014. Fax: (562) 926-9614
Represent South Korean manufacturers of hydraulic breakers, pulverizers, crusher shears and vibratory compactors.
Hammond Air Conditioning
125 Samnoh Cres. RR No. 4, Ingersoll, ON,
Canada, N5C 3J7
Ph: (519) 485-5961. Fax: (519) 485-3745
Denise Henry; Ken Barnard
Arctic Wolf has become the first choice for a growing number of equipment dealers, original equipment manufacturers and end users seeking aftermarket air conditioning. Hammond's experience level stretches to over 600 different vehicle tyoes for everything including miniexcavators, skid steer loaders, compact equipment, motor graders, wheel loaders and dozers, material handlers, etc.
Harris Waste Management Group
200 Clover Reach, Peachtree City, GA 30269
Ph: (800) 373-9131 ; (770) 373-9131. Fax: (770)
Doug Sebastian, VP Sales and Marketing; Jim
Jagou, VP Sales; Bob Pfeffer, VP Sales
Industry leader in the design, manufacture and sale of scrap processing, recycling and waste handling equipment.
3010 Knight St. No. 160, Shreveport, LA 71105
Ph: (318) 868-2303. Fax: (318) 869-2071
Hazemag USA Inc.
P.O. Box 1064, Uniontown, PA 15401
Ph: (724) 439-3512. Fax: (724) 439-3514
David Waiters, Applications/Sales
Hazemag is the leading manufacturer of horizontal shaft impactors and impactor technology, with over 70,000 units sold worldwide and 1,100 units operating in North America since our beginning in 1946.
225 Battersby Ave., Enumclaw, WA 98022
Ph: (360) 825-1601. Fax: (360) 825-1603
Leslie Morgan, Director of Marketing
Helac Corp. manufactures a comprehensive line of hydraulic rotary actuators used as component parts for OEMs and after-market attachments for the construction industry. Helac PowerTilt and PowerGrip, two specialty products, improve the productivity of buckhoes and excavators.
Hercules Machinery Corp.
P.O. Box 5198, 3101 New Haven Ave., Fort Wayne,
Ph: (260) 348-1890; (260)424-0405.
Fax: (260) 422-2040
Hercules Machinery has been in the foundation equipment business since 1964. We also have sectional barges, H pole and steel sheet piling.
Himes Service Co. Inc.
P.O. Box 20143, Waco, TX 76702
Ph: (888) 790-9033. Fax: (254) 776-6756
Buddy Himes, VP
HSC provides a full line of services, including sales, service, consulting, training and equipment appraisals. The sales/install department works with customers and equipment manufacturers performing installations on new and used equipment, including balers, shears, compactors, conveyors, sort systems, chip processing systems, briquettes, etc. The service department performs repairs, troubleshooting and preventive maintenance on all makes and models of recycling equipment. HSC also provides on- or off-site equipment rebuilds and relines. Consulting services, equipment evaluations and appraisals are provided at all stages of equipment purchasing and installation.
3730 California Rd., Orchard Park, NY 14127
Ph: (800)836-2253; (716) 667-3116.
Fax: (716) 667-3840
Offers recycling and solid waste systems and equipment.
HogZilla Grinders--CW Mill Equipment Co. Inc.
14 Commerce Dr., Sebetha, KS 66534
Ph: (785) 284-3454. Fax: (785) 284-3601
Tim Wenger, President
CW manufactures 13 standard HogZilla grinder models ranging from 525-2000HP including selfpropelled track driven and self-loading units, most grinder configurations include tub grinders and horizontal feed units for wood and other waste recycling. Optional thrown object restraint and tire processing packages available for most tub grinders.
505 McCormick Dr., Glen Burnie, MD 21060
Ph: (410) 768-9662. Fax: (410) 768-4878
Horizon Keystone Financial
105 Fairway Terrace, Mount Laurel, NJ 08054
Ph: (800) 606-0049. Fax: (856) 642-9993
Equipment financing for vendors and end users.
6000 E Evans Ave., Suite 2-300, Denver, CO 80222
Ph: (303) 512-2000
Rental service for name brand tools and equipment, with hundreds of the latest models available at 90 locations. Backed by service excellence.
Hustler Conveyor Co.
4101 Crusher St., O'Fallon, MO 63368
Ph: (636) 441-8600. Fax: (636) 441-8611
Paul Griesedieck, VP; Dave Guyton, Sales Manager
Manufacturers of heavy-duty conveyors for the recycling, mixed solid waste and scrap processing industries for more than 40 years.
Hyundai Construction Equipment
4290 Riverglen Cir., Atlanta, GA 30024
Ph: (847) 652-2196. Fax: (847) 437-3572
IHI/Compact Excavator Sales
P.O. Box 667, Elizabethtown, KY 42701
Ph: (270) 538-1447. Fax: (270) 737-1857
Jenny Smiith; Kendall Aldridge
North American distributor of IHI mini-excavators and crawler carriers.
Impact Roller Technology
1508 J. F. Kennedy Dr., Suite 107,
Bellevue, N 68005
Ph: (402) 293-7658. Fax: (402) 292-0272
Indeco North America
120 Dodge Ave., Stratford, CT 06615
Ph: (203) 377-7791. Fax: (203) 377-7796
Manufacturer of hydraulic breaking attachments for the construction, demolition and aggregate industries.
Industrial Magnetics Inc.
1240 M-75 S, Boyne City, MI 49712
Ph: (800) 662-4638; (231) 582-3100.
Fax: (231) 582-0622
Dennis O'Leary, Director of Marketing and Field
Established in 1961, IMI is an industry leader in providing both permanent and electromagnetic devices for holding, lifting, fixturing, conveying, transferring and separating metal. Serving over 40 industries. IMI'S team of in-house designers, engineers and product specialists are dedicated to ensuring the optimum solution for every application, through use of the research and development facility
Industrial Tires Ltd.
3161 Wharton Way N., Mississauga, ON, Canada,
Ph: (905) 625-1600. Fax: (905) 625-1277
Manufacturers of solid rubber tires, importers of industrial pneumatics. All tires OTR. Also manufacturers of rubber cutting edges.
Industry Online Central
8050 Watson Rd., Suite 369, Saint Louis, MO
Ph: (314) 842-8383
Peggy Berry, President
Industry Online Central is Missouri's material and equipment exchange.
730 S Hancock Ave., Freeport, IL 61032
Ph: (815) 233-1619. Fax: (815) 233-4446
Manufacturer of aggregate crushing and screening equipment. Also make equipment for concrete and asphalt recycling.
Innovative Hydraulic Designs Inc.
6830 N Eldridge Pkwy., Unit 102, Houston, TX
Ph: (713)218-6453; (281)849-2949. Fax: (713)
Don West, President; Jim Goodburn, VP
Designers and manufacturers of heavy-duty hydraulic components and systems, including axialpiston pumps, motors.
Insurance Office of America
521 Fellowship Rd., Suite 130, Mount Laurel, NJ
Ph: (888) 533-7475. Fax: (856) 608-9788
Email: seddon email@example.com
Bill Seddon, VP
Insurance brokers specializing in recycling companies, transportation and related industries.
Intec Video Systems Inc.
23301 Vista Grande Dr., Laguna Hills, CA 92653
Ph: (949) 859-3800. Fax: (949) 859-3178
Roy Barbatti, National Sales Manager
Intec Video Systems provides visibility solutions to eliminate blind spots and reduce backing accidents. Intec safety cameras provide the complete view behind the vehicle, enabling safer operation and improved efficiency. Intec has been improving safety for solid waste equipment for over 25 years.
Integrated Waste Solutions
1246 W Chester Pike, West Chester, PA 19383
Ph: (610) 738-9088. Fax: (484) 229-0266
35800 Glen Dr., Eastlake, OH 44095
Ph: (440) 953-0550. Fax: (440) 953-0564
Bob lacofano, CEO; Ken Lukes, President
Manufacturer and distributor of post-consumer recycled-content products and waste oil-fired hot air and hydronic boiler heating systems.
Irock Crushers LLC
P.O. Box 537, Wooster, OH 44691
Ph: (330) 264-0201. Fax: (330) 264-0508
Tom Hartzler, Sales Director
Manufactures line of portable impact crushing and screening plants with production capacities ranging from 800 tph. Irock two-bar rotor impactors generate high crushing forces to easily process large C&D debris and concrete and asphalt feed material
P.O. Box 190, Wadley, GA 30477
Ph: (478) 252-0022. Fax: (478) 252-9030
Email: E-mail: firstname.lastname@example.org
Charlie Hall, President; John Kitchens, General
Manufactures a complete line of mobile shears, featuring an innovative bolt-on replaceable cutting tip that eliminates downtime due to welding and build up. Auto flatteners, grapples and balers are also made.
4695 Chabot Dr., Suite 102, Pleasanton, CA 94588
Ph: (888) 433-5426. Fax: (888) 433-3467
Email: customercare@ironpla net.com
Customer Care Auctions of heavy equipment, including used construction and agricultural equipment and trucks.
J & J Truck Bodies & Trailers
10558 Somerset Pike, Somerset, PA 15501
Ph: (800) 777-1671. Fax: (814) 444-3585
J&J Bodies & Trailers manufactures steel and aluminum dump truck bodies and dump trailers that are used in rock hauling, demolition and construction work, recycling and road maintenance. The company also builds moving floor, tipper and push out trailers for refuse hauling. These dump truck bodies and dump trailers are loaded with many ready-to-work features, or we can provide a specification package designed to meet our customers" individual requirements. Contact J&J and find out why dealers and operators, worldwide, look to us for quality products and cost-effective solutions. IS0 9001:2000 certified.
89 Eads St., W Babylon, NY 11704
Ph: (631) 420-1920. Fax: (631) 420-0467
Joseph Celano, President
J.C. Industries manufactures refuse handling equipment.
J.P. Whalen Co. Inc.
4451 145th Ave. SE, Bellevue, WA 98008
Ph: (425) 747-2191. Fax: (425) 747-6779
Manufacturers' reps in the Pacific Northwest. We sell magnets, controllers and generators for mill duty and scrap handling and eddy current and magnetic separation systems. In business for 20 years.
J.R. Woodruff Co.
P.O. Box 19548, Houston, TX 77224
Ph: (713)467-8463. Fax: (713)467-5899
David Rex; Wes Sewell; Larry Huff
Complete magnet systems and controls as well as radiation detection systems for scrap and demolition material handling.
J.W. Jones Co. LLC
2468 S SR67, Paragon, IN 46166
Ph: (765) 537-2279. Fax: (765) 537-2171
John Jones, Owner/President
J. W. Jones Co. LLC specializes in new and used re-manufacturing portable crushing and screening equipment for the mining and recycling industries. The company was founded in 1967.
P.O. Box 727, Harlan, IA 51537
Ph: (800) 831-2005. Fax: (712) 755-7600
Russell Rauterkus, Western U.S. Sales Manager;
John May, Eastern US Sales Manager
Supplier of replacement parts for hammermills and pellet mills worldwide. Jacobs pellet mill dies are drilled by computerized gun-drills for an incredibly smooth hole. The company also manufactures replacement roll shells and offers a roll reconditioning service. Jacobs features the STC/STC + 2 line of hammermill hammers. These long-wearing hammers are available in many styles to fit most make and model mills.
2000 Bamford Blvd., Pooler, GA 31322
Ph: (912) 447-2000. Fax: (912) 447-2248
JCB--one of the world's top four construction equipment manufacturers--bases its North American Headquarters and manufacturing facility just outside of Savannah, Georgia. JCB worldwide has 17 plants on four continents including USA, India, Brazil, China, UK and Germany, producing 220 different machines: from compact equipment--including skid steers and mini excavators--to heavy duty excavators, wheel loaders, articulated dump trucks and compaction equipment.
1149 W Front St., Plainfield, NJ 07063
Ph: (908) 754-0404. Fax: (908) 754-2247
Email: Paul Decosimo
Maker and distributor of all types of containers: plastic, canvas-lined, tilt trucks, pails, etc.
Jeffrey Specialty Equipment Corp,
398 Willis Rd., Woodruff, SC 29388
Ph: (800) 615-9296; (864) 476-7523.
Fax: (864) 476-7510
Douglas Sublett, Sales & Marketing Manager
Jeffrey Specialty Equipment Corp. was established in 1874. Offers crushers and vibrating feeders along with numerous other products added to the product line. The industries we serve expanded into aggregate, forestry, industrial, mining and solid waste. Those industries, along with the coal industry, remain the focus of Jeffrey.
Jewel Attachments LLC
5525 SE 28th Ave., Portland, OR 97202
Ph: (503) 230-0456. Fax: (503) 230-1101
Jewel Attachments specializes in manufacturing customized material handling attachments for job applications in the construction, demolition, recycling and logging industries.
JMR Construction Services
4340 Turner Ave., Oakland, CA 94605
Ph: (510) 569-3067. Fax: (510) 569-3068
Email: riggs email@example.com
Janice Riggs, Independent Consultant
Consulting for the availability and use/reuse of construction materials with regard to government agency recycle requirements, filings on projects. On-site representation/project management for the contractor regarding the above on an as needed basis. By the hour or by the project.
Job Machinery Inc,
P.O. Box 240217, Apple Valley, MN 55124
Ph: (952) 892-6292. Fax: (952) 892-7271
Email: jobmchyinc@frontiernet, net
John Fryklund, Owner
Specializing in the sale of high quality reconditioned Fuchs & Liebherr material handlers. North American distributor for Mozelt Genuis Generators 10KW-30KW systems. Source for new and used grapples and handling magnets.
John Deere Construction & Forestry Co.
P.O. Box 8806, Moline, IL 61266
Ph: (309) 765-0227. Fax: (309) 765-1859
Email: Craig J. Olson, Manager Advertising,
Promotions & Events
Formed as a separate division in the mid- 19505, John Deere's Construction & Forestry Co. today produces more than 120 machine models sold and serviced through a network of more than 800 locations worldwide. John Deere construction and commercial worksite products are used in material handling, waste handling and recycling. Equipment models include crawler dozers, 4WD loaders, excavators, articulated trucks, backhoe loaders, crawler loaders, tool carriers, wheel and track waste handlers, landscape loaders, compact excavators, skid steers, articulated dump trucks and motor graders.
Jones Manufacturing Co.
P.O. Box 38, Beemer, NE 68716
Ph: (402) 528-3861. Fax: (402) 528-3239
Email: mig htygia firstname.lastname@example.org
Bob Jones, Owner; Don Reis, Salesman
P.O. Box 500, Bristol, NH 03222
Ph: (603) 744-3700
JRB Attachments LLC
820 Glaser Pkwy., Akron, OH 44306
Ph: (330) 734-3000. Fax: (330) 734-3018
Paladin Heavy Construction manufactures a full line of couplers, buckets, forks and specialty attachments for wheel loaders, wheel loader backhoes and excavators--equipment for versatility and great productivity. Because we offer brand names like JRB, C&P and Badger Attachments, we're sure to carry the attachments you need to achieve the highest productivity at the lowest cost.
10000 W 75th St., Suite 103, Shawnee Mission,
Ph: (913)384-0880. Fax: (913)432-5242
Provides truck scale automation and billing solutions system for the recycling, waste and aggregate industries.
KAB Tech Corp USA
213 Riverway Ct., Suite D, Greer, SC 29650
Ph: (800) 878-7242; (864) 879-7242.
Fax: (864) 879-7252
Design and fabrication of implant modular enclosures, sound stopper enclosures, mezzanies and platforms.
P.O. Box 946, Fredericksburg, VA 22404
Ph: (540) 898-5500
Michael Camber, Marketing Services Manager;
Maker of line of rotary screw air compressors, portable dryers, blowers and vacuum packages, filters, drains and other air system products.
Kann Manufacturing Corp.
210 Regent St., Guttenberg, IA 52052
Ph: (563) 252-2035. Fax: (563) 252-3069
Troy Mizell; Becky Kelly
Manufacturing of single and multi-compartment front loaders, single and two compartment side loaders and multi-compartment recycling trucks.
Karl Kuemmerling Inc.
129 Edgewater Ave. NW, Massillon, OH 44646
Ph: (330) 477-3457. Fax: (330) 477-8528
Manufacture Mitts & Merrill brush clippers, both hydraulic and drum style. Knives for all brands of brush chippers. Tree trimming supplies: ropes, saws, pruners, etc. Outdoor work clothing, TimberWolf Wood Splitters & John Bean Sprayers.
Karl W. Schmidt & Associates Inc,
3900 E 68th. Ave., Commerce City, CO 80022
Ph: (303) 287-7400. Fax: (303) 287-7474
Karl W. Schmidt, President; Bill Ranger, GM
We are a manufacturing company specializing in fabricating and manufacturing conveyors for the recycling industry.
Kawasaki Construction Machinery
2140 Barrett Park Dr., Suite 101,
Kennesaw, GA 30144
Ph: (770) 499-7000. Fax: (770) 421-6842
Supplier of a full range of wheel loaders, including rubber-tired articulated wheel loaders.
Keith Manufacturing Co.
P.O. Box 1,401 NW Adler St., Madras, OR 97741
Ph: (541) 475-3802. Fax: (541) 475-2169
Jonathan Smith, Sales Engineer
Keith Walking Floor[R] conveyors and unloaders are designed to meet the demands of the waste and recycling industries by providing extraduty material handling systems. Systems are custom-engineered to suit the specific needs of each recycling facility, transfer station or trailer Quickly unload plastic, cardboard, green waste and scrap. Heavy-duty systems are also available for unloading highly abrasive materials, such as demolition debris, auto recycling and aggregate. Designed for both mobile and stationary applications, systems are low in maintenance and easy to operate. Mobile systems installed in trailers are versatile, require no tipping and can unload at nearly any location.
170 SR 271, Ligonier, PA 15658
Ph: (800) 653-6069. Fax: (724) 238-3187
Tracy Black, Operations Manager
Kenco furnishes attachments for excavators ranging from mini to 200, 000 pounds and wheel loaders from 1.0 to 40 yards as well as dozers and skid steers.
P.O. Box 231, 1600 Technology Way,
Latrobe, PA 15650
Ph: (800) 222-9327
Email: jeff.hickey@kenna metal.com
Jeff Hickey, Product Manager; Steve Ross, OEM
Manager; Vanessa Corbett, Customer Service Rep.
Kennametal Inc. was founded in the 1938 as a tungsten carbide manufacturer. Tungsten carbide applications remain the core focus of KennametaL Kennametal is the only grinder hammer tip supplier that also makes its own carbide and the only source for Kencast[TM] cast alloy steel grinder hammer tips with carbide cast into the part, providing unsurpassed operating costs in the most challenging grinding environments like asphalt shingle and C&D recycling.
Kent Demolition Tools
711 Lake St., Kent, OH 44240
Ph: (330) 673-5826. Fax: (330) 677-1616
Jeff Crane, General Manager
Kinane Engineering Inc,
10218 S Snow Iris Way, Sandy, UT 84092
Ph: (801) 571-9016. Fax: (801) 571-6864
Web: kina neengineering.com
JoAnn Feldman; Cy Kinane
We are an engineering firm specializing in bulk material handling systems using belt conveyors, crushers, screening, silos, hoppers and whatever it takes to complete the system. Projects are designed to meet each customer's needs.
7310 Grade Lane, Louisville, KY 40219
Ph: (502) 366-5685. Fax: (502) 366-3701
Bill Ware, Sales Manager
Vibratory machine manufacturer for bulk solid material handling.
Kinshofer North America
5041 Mainway Dr., Unit 11, Burlington,
Canada, ON L7L 7G5
Ph: (800) 268-9525; (905) 335-2856. Fax:
Develops, manufactures and sells hydraulic lifting devices.
Kirk Manufacturing Inc.
2951 Dragana Dr., Richmond, VA 23233
Ph: (804) 741-0287. Fax: (804) 497-4937
Jay Kirkpatrick, President
Manufacturer of the patented Mega-Mag electric lifting magnet.
KMI Building Associates
1613 E Glenoaks Blvd., Suite C,
Glendale, CA 91206
Ph: (818) 548-8995. Fax: (818) 265-5171
Consulting services include sustainable construction documents, solid waste management and recycling, public education and professional writing for commercial, industrial, governmental and institutional projects.
Kobelco Construction Machinery America
500 Diller Ave., New Holland, PA 17557
Ph: (717) 355-1260. Fax: (717) 355-3600
Kobelco's goal "To Better Serve our Customers" through a manufacturer/dealer partnership has led to the success and expansion of Kobelco Construction Machinery America with over 250 North American outlets. Utilizing features like the ITCS power unit control system, technical prowess is matched with an operating environment that provides comfort and increases productivity All dealers are backed by engineers, in-house and field service representatives and technical staff
700 W 21st St., Yankton, SD 57078
Ph: (800) 542-9311; (605) 665-8771. Fax: (605)
Email: curtpeterka@kolberg pioneer.corn
Manufacturer of construction equipment for the aggregates and recycling industries.
Kolman--A Division of the Conveyor Co.
1200 Ninth Ave., Sibley, IA 51249
Ph: (712) 754-4661. Fax: (712) 754-2200
Designer and manufacturer of custom bulk material handling systems, including belt conveyors for the aggregate and mining industry with process control systems, fine and coarse material washers, vibrating screens, classifiers, portable screening plants and belt alignment systems.
Komar Industries Inc.
4425 Marketing PI., Groveport, OH 43125
Ph: (614) 836-2366. Fax: (614) 836-9870
Email: komarindustries@world net.att.net
A full-service company specializing in complete system design, engineering, manufacturing and service of heavy equipment and systems.
Komatsu America International Co.
P.O. Box 8112, 440 N Fairway Dr.,
Vernon Hills, IL 60061
Ph: (847) 970-5815. Fax: (847) 970-4102
Komatsu manufactures a wide range of construction equipment and attachments including excavators, loaders, trucks and mobile impact crushers.
Komline-Sanderson Engineering Corp.
12 Holland Ave., Peapack, NJ 07977
Ph: (908) 234-1000; (908) 225-5457. Fax: (908)
Komline-Sanderson manufactures water pollution control equipment.
Kormann Rockster Recycler GmbH
Parlentrasse 10, Enns, Austria,
Ph: +43 (0) 7223 81 000. Fax: +43 (0) 7223 81
Rockster Recycler is an independent manufacturer specializing in the design and production of topquality mobile crushing and screening systems. Special features include a modular construction with interchangeable jaw and impact crusher units. Another product line is a volumetric flow measuring system using state-of-the-art ultrasound technology for all conveyor systems and all types of bulk material.
400 Heaton St., Hamilton, OH 45011
Ph: (513) 863-1277. Fax: (513) 863-7644
Anne G. McAdams
Komylak Corp. is an engineering-oriented manufacturing company. Since 1946 Kornylak has specialized in designing and constructing specialty machine, especially for the material handling industry, including conveyors (metal slat, tube supported belt and gravity); wheels (multidirectional, all plastic skate wheels), and controlled gravity live storage systems. For cargo handling, Kornylak manufactures a total system, which includes powered and non-powered conveyor track sections, belt loaders, cargo lifters and other components to provide a fully automated cargo handling facility, which can be tailored to specific site requirements.
Krause Manufacturing Inc.
6059 Guide Meridian Rd.,
Bellingham, WA 98226
Ph: (360) 398-7533. Fax: (360) 398-2914
Custom building conveyors is our specialty, Whether it is a single baler, a sorting system or a complete recycling plant, we provide heavy-duty equipment designed and engineered for heavyduty use. Ideal for all construction and demolition recycling applications.
Kubota Tractor Corp.
3401 Del Amo Blvd., Torrance, CA 90503
Ph: (310) 370-3370. Fax: (310) 370-3846
Kubota Tractor Corp. markets a complete line of tractors from 15 to 98 PTO horsepower, along with a line of performance-matched implements and compact construction equipment.
1050 Drop Off Drive, Summerville, SC 29483
Ph: (843) 873-8333; Fax: (843) 873-8372
Established in 1974, Kuhn Equipment Sales specializes in the sale and rental of late model earthmoving, demolition and material handling equipment from a wide range of manufacturers including Caterpillar, Hitachi, Komatsu, Liebherr and Fuchs. We also offer an assortment of both new and used work tools for the industry from manufacturers such as Genesis, LaBounty, NPK and Caterpillar.
Kuhn Knight Inc.
1501 W Seventh Ave., Brodhead, Wl 53520
Ph: (608) 897-2131. Fax: (608) 897-2561
Darrin Harn, Industrial Sales
Kuhn Knight Inc. manufactures machinery for mixing and land application of organic materials, compost and biosolids.
KW Windrow Composter (Resource Recovery Systems)
511 Pawnee Dr., Sterling, CO 80751
Ph: (970) 522-0663. Fax: (970) 522-3387
Les Kuhlman; Joan Kuhlman
RRS presents a range of KW self-propelled, singlepass windrow straddling composting equipment and provides consulting services.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||A & A Magnetics-KW Windrow Composter (Resource Recovery Systems)|
|Publication:||Construction & Demolition Recycling|
|Date:||Dec 15, 2006|
|Next Article:||On the green.|