Printer Friendly

Change pipe diameter in just 15 minutes.

A relatively simple and inexpensive mechanical system changes pipe and calibrator diameters in 15 minutes, as compared with an hour or two for standard pipe systems. This brand-new IntelliChange system was developed by Cincinnati Extrusion of Austria (U.S. office in Erlanger, Ky.). It uses a die with an adjustable gap and changes pipe diameter with a conical, 800-mm-long transition piece connecting the die to the calibrator. Two calibrators of different diameters are mounted on a rotating holder: One is in operation while the other is prepared off-line and then rotated into position. The system also has a special outlet seal on the vacuum tank and a self-adjusting hauloff. The patented system comes in two sizes for pipe diameters from 40 to 90 mm or 90 to 160 mm. Each size comes with a choice of four standard calibrator diameters. Pipe wall thicknesses range from 1.8 to 32.1 mm. Tel: (859) 746-1530 * PTDirect: 776VV

COPYRIGHT 2005 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:KEEPING UP WITH Extrusion
Publication:Plastics Technology
Date:Oct 1, 2005
Previous Article:Nine-layer die gets more streamlined.
Next Article:Electric machines slash energy use.

Related Articles
Extrusion systems: product lines reviewed.
Extrusion systems.
Change pipe diameters on the fly. (Extrusion).
Crossheads, tubing dies.
Extruder outputs rise, downstream units gain flexibility.
Pipe extrusion system.
Crossheads and in-line tubing die lines enhanced to accommodate 12" diameters.
Extrusion system handles large-wall pipes, tubes and cable.
State-of-the-art precision extrusion tooling capabilities highlighted.

Terms of use | Privacy policy | Copyright © 2020 Farlex, Inc. | Feedback | For webmasters