Centre of excellence: Deburring is an indispensable process according to DeburringExpo.
Parts manufacturing is currently faced with new tasks in numerous areas. Due to more and more complex geometries and finer structures, machined, formed, primary formed, forged, sintered and moulded workpieces are not only resulting in stricter requirements where actual parts production is concerned, but rather during deburring and surface finishing as well. The technical cleanliness of components is an essential quality criterion in many industry sectors such as the automobile and automotive supplier industries, aerospace and aviation, machinery manufacturing, medical engineering, metrology, precision engineering, sensor technology and drive technology, as well as in the field of electro-mobility. "Reliable deburring, during which extremely fine burrs and flash must also be removed depending on the degree of required cleanliness, is a fundamental prerequisite for complying with cleanliness specifications," explains Hartmut Herdin, managing director of fairXperts GmbH & Co. KG, promoters of DeburringEXPO. Furthermore, in some cases surfaces are required which minimise friction, wear and noise, and which make it possible to enhance performance and extend service life. Downstream processes such as joining, sealing, coating and assembly also necessitate burr-free and in some cases rounded edges for various reasons. And thus for example in the field of sheet metal processing, deburring minimises the risk of injury due to sharp edges and reduces tooling wear for edging and straightening machines. On the other hand, good deburring and well-defined edge rounding make it possible to enhance painting quality at the edges. "Relying solely on experience gained with previously used processes for these tasks can quickly lead to a competitive disadvantage. Benchmarking is thus advisable which focuses central attention on searching for the most effective, reliable and economical technologies," explains Hartmut Herdin.
Companies are also being confronted with new tasks in the area of surface finishing which result from innovative production processes such as additive manufacturing (AM). The removal of residual powder and supporting structures, as well as the rough and porous surfaces produced by these processes, are challenging.
Cross-industry, cross-technology information
The above mentioned tasks and many others as well will be explored at the upcoming DeburringEXPO, which will be held at the Karlsruhe Exhibition Centre from the 8th through the 10th of October, 2019. As of the end of March, 125 exhibitors from eleven countries, including numerous market and technology leaders, had already made firm booking for their booth floor space. Offerings for solutions involving deburring, rounding and the production of precision surface finishes, which are unparalleled at any other event around the world, will await the trade fair visitors.
The exhibition portfolio covers products, systems, processes and services for deburring, the production of precision surface finishes and cleaning after deburring, as well as measuring and test technology and analysis systems for quality control and quality assurance for components made of practically every conceivable material in nearly all industry sectors. Opportunities for further qualification and technical literature will also be found at the event. With its comprehensive spectrum, DeburringEXPO not only covers the entire process sequence for deburring and the production of precision surface finishes, it also identifies trends and imparts practical as well as theoretical knowledge.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||DEBURRING EXPO|
|Date:||May 1, 2019|
|Previous Article:||Why measure oven temperature? Elcometer says it is vital to have accurate measurement in your oven.|
|Next Article:||Keeping it clean: A Manchester assembling and packaging firm invests in medical grade cleaning facility with help from Turbex.|