Canada : Lumina Gold Announces Positive Cangrejos Metallurgical Testing Results.
Flotation combined with gravity concentration can be used to recover 83% of the gold and 87% of the copper into saleable concentrates. These results demonstrate a 4% improvement in the copper recoveries and similar gold recoveries when compared with the 2015 testing. The results also demonstrate that cyanidation of the gravity concentrates and flotation cleaner scavenger tails is not required in the flow sheet, which was the most favourable recovery method during the 2015 testing. Alternatively, whole-ore cyanidation can be used to process the mineralized materials to recover 90% of the gold in dore, but no copper is recovered.
The test work was performed at C.H. Plenge & CIA S.A. (Plenge), an independent metallurgical testing laboratory based in Lima, Peru and conducted on four individual composites and a Master Composite. The composites were prepared using 870 kilograms of quartered drill core collected during the 2017 drilling campaign from eight different drill holes and represented high grade and low grade mineralized materials from the Project.
The Master Composite contained 0.25% copper, 0.96 grams per tonne gold, 0.6 grams per tonne silver and 20 ppm molybdenum. Gravity concentration tests, followed by lock-cycle flotation tests on gravity tails, were performed. The gravity concentrate contained 39% of the gold and 12% of the silver. The gravity concentrate assay was 143 grams/tonne gold and 31 grams/tonne silver. The flotation concentrate contained 44% of the gold, 87% of the copper and 67% of the molybdenum. The flotation concentrate assay was 43 grams/tonne gold, 21% copper and 0.2% molybdenum. When the molybdenum content is high enough the production of a separate molybdenum concentrate may be warranted. Comminution tests indicate that the materials have average Bond Ball Mill work index and SAG Mill specific pinion energy values of 17.7 kWh/mt.
Quality Assurance and Quality Control
All Lumina sample assay results have been monitored through a quality control / quality assurance ("QA/QC") program including the insertion of blind standards, blanks and the reanalysis of duplicate samples. The results of the QA/QC program and the resampling program indicate that the sample database is of sufficient accuracy and precision.
Nelson King, SME Registered Member and Metallurgical Consultant to Lumina, is a Qualified Person as defined by National Instrument 43-101 Standards of Disclosure for Mineral Projects. Mr. King has assisted Lumina in the development and direction of the metallurgical testing program for the Project, has visited Plenges laboratory in Lima to observe the testing program, and has reviewed and approved the content of this press release relating to the metallurgical testing. Mr. King also verified the results of the metallurgical testing.
[c] 2017 Al Bawaba (Albawaba.com) Provided by SyndiGate Media Inc. ( Syndigate.info ).
|Printer friendly Cite/link Email Feedback|
|Date:||Jan 20, 2018|
|Previous Article:||Palestine : Palestinian Investment Fund signs deal to mount solar PV on 500 public schools rooftop.|
|Next Article:||United States : Senate Must Finish Work to Protect Care for Low-Income Patients.|