Custom-formulated concentrates for most thermoplastics can include a nontoxic blowing agent for food-contact applications and can contain color and other additives. Super-cell modified azo compounds reportedly permit improved control of gas generation.
LDPE-based foaming-agent concentrates specially designed for thin blown, cast, or coextruded films. Grade 10123 is for LDPE, HDPE or PP homopolymers. Universal 10349 concentrate is for engineering resins, polar or nonpolar.
ATOFINA CHEMICALS, INC.
Isotron line of HCFCs used as physical blowing agents for PUR, PS, and PE.
BAYER CHEMICALS CORP.
See Lanxess Corp.
Foamazol chemical blowing agents for use in most application such as structural foam, wire and cable, profile and sheet, blown and extruded films, blow molded containers, injection molding, and PP ribbon extrusion. Products offered in 100% active free-flowing powders and pelletized masterbatches. Endothermic and exothermic formulations available as well as blends. Masterbatches in a range of base resins for improved compatibility with resins such as PP, PE, copolymers, PS, PPE, ABS and PVC. Processing temperatures from 300-500 17. Custom formulations available.
BIDDLE SAWYER CORP.
Distributes azodicarbonamide products from Otsuka Chemical Co. of Japan for producing foams from PVC, PE, PP, EVA and rubber. Newest line is Azofoam Ultra, which has superior dispersibility, very low dusting, and does not cake. In addition to these exothermal products, a separate line of endothermal blowing agents is available. OBSH, TSSC and TSH also available.
Dry powders or compounding of blowing agent masterbatches from 25 lb to truckloads in all resin systems and additives combined with colorants to provide multifunctional concentrates.
CLARIART CORP. PLASTICS BUSINESS UNIT
Business Unit Additives Masterbatches offers full range of Hydrocerol endothermic foaming agents, Exocerol exothermic and exothermic/endothermic chemical foaming agents, and Activex sink mark removers and cell stabilizers for wide range of thermoplastics.
Cylacell is a predictable, environmentally safe, and equipment-friendly inorganic sodium silicate endothermic blowing agent for thermoplastics, rubber, silicone, and thermoset polyester bulk molding compounds. It contains bound water, which causes particles to expand into closed-cell spheres at temperatures above 300 F. Fume- and odor-free, it will not discolor resins or postblow. Molded parts do not exhibit outgassing, and painting can be done immediately.
Compared with some fluorocarbon, hydrocarbon, or other liquid physical foaming agents, Cylacell reportedly can show improved cell structure, lighter foam densities, and sometimes higher flame retardancy and smoke suppression. It can also obviate the need for nucleating agents. Tests have shown that Cylacell can increase useful life of foams by eliminating any potentially reactive blowing-agent byproducts that can degrade elastomers.
DOW CHEMICAL CO.
Methylene chloride urethane grade is a modified methylene chloride for flexible PUR slabstock foam. Contains an inhibitor that minimizes foam oxidation and scorching. Can be used as sole auxiliary blowing agent. Reportedly offers high volatility, low flammability, low raw-material and handling costs, and low toxicity and is said to be non-polluting.
For PS foam sheet, Dow licenses technology for using 100% C[O.sub.2] to produce foam sheet in thicknesses up to 0.25 in. and densities comparable to those produced with hydrocarbon or HCFC-22 blowing agents (2-10 pcf). It requires retrofitting of existing extrusion lines.
DUPONT CO. CHEMICALS DEPT.
Line of fluorochemical blowing agents includes Formacel Z-2 (HFC-152a), FDA approved for use in PS food service and packaging foams; Formacel S (HCFC-22) used in closed-cell polyurethane and polyisocyanurate foams; and Formacel Z-4 (HFC-134a) for polyurethane systems and appliance foams, and in PS insulating board.
Endex endothermic chemical foaming and nucleating agents, and endothermic/ exothermic synergistic hybrids for thermoplastic foams generate fine closed-cell structures. Products improve flow, compatibilize mixed/cycled polymers, reduce molding cycle or increase extrusion rates, and are used for sink mark elimination and improved weld-line strength.
Endex ABC 2750, a 50% active pelletized endothermic chemical foaming agent, is compatible with almost all thermoplastic polymers, including commodity polymers, engineering polymers such as ABS, acetal, PC, modified PPO/PPE, and polyolefin elastomers.
Endex ABC 100, a 100% active powder endothermic chemical foaming agent is also an effective nucleating agent in physical foaming processes.
Endex PBS 2610 and Endex PBS 2625 concentrates designed for use in engineering polymers, which are moisture sensitive such as PET and PC. Products may be used in extrusion or injection molded structural foam for weight reduction, and also to remove problem sink marks. The combination of low use levels, typically 0.5-2%, and good physical property retention in the finished part, make these products very cost effective.
Endex 1040 is a concentrate based on OBSH in PE carrier resin. It is designed for use in the processes using temperatures in the range 150C to 175C (300F to 350F). It produces very fine cell structures, with a combination of carbon dioxide and nitrogen gases.
EPI ENVIRONMENTAL PLASTICS INC.
Endothermic, exothermic, and endothermic/exothermic chemical blowing agents in powders and resin concentrates. Concentrates come with compatible resin carriers for polyolefins, PS, ABS, PPO, PPE, PET, PVC, nylon, and PC. Concentrate activity levels from 30% to 70%.
EPIcor endothermic chemical blowing and nucleating agents reportedly offer better dispersion and physical properties, faster cycle times and extrusion rates, higher gas volumes, smooth surfaces, and fine cell structure with thick skins.
EPIcell exothermic chemical agents include OBSH concentrates, azodicarbonamide, and non-plateout grades.
POLYcor endothermic/exothermic hybrid chemical blowing agent is compounded in one pellet. Offered in structural-foam molding grades for high-temperature resins such as PPO, PC, and PC/ABS alloys. POLYcor combines surface property benefits of EPIcor and higher gas pressure typical of EPIcell along with fast degassing and part paintability. Various grades provide finer cell structures and smooth surfaces.
Expancel expandable thermoplastic microspheres used as blowing agents in systems heated to 200-400 F. Microspheres are white, spherical polymeric particles. Thermoplastic shell encapsulates a gas and softens when heated, allowing expansion from the increased internal vapor pressure. Expansion factor is 40-60 times the original volume. Other features include defined cell size, closed-cell structure. Suitable as a blowing agent in plastisols, elastomers, thermosets, and thermoplastics.
FERRO CORP. LIQUID COATINGS & DISPERSIONS DIV.
Spectraflo liquid chemical exothermic and endothermic blowing-agent dispersions produce higher volumes of nitrogen gas per unit of additive than conventional blowing agents while improving structural uniformity and processing control. They are said to improve sink mark removal and reduce weight while preserving structural properties of ABS, LDPE, HDPE, and PP parts injection molded and extruded/coextruded.
Endothermic formulations require no gas-off period, allowing painting of parts immediately after molding. Custom formulations available to gas-off at specific temperatures. Liquid vehicle reportedly allows higher loading of active ingredients than is possible with solid carriers.
HARWICK CHEMICAL MFG. CORP.
Azodicarbonamide-based blowing agents in various plasticizers for foam acrylics, EVA, PE, and vinyl.
HITECH POLYMERS, INC.
Pelletized concentrates of blowing agents can be incorporated into a variety of elastomers, engineering thermoplastics, and commodity polymers.
Offers azodiarbonamide-based chemical blowing agents, which include Ficel specialty formulations and Porofor pure azo products. End-use applications include PVC, polyolefin foams, styrenic rubber foams, ABS, PC, and other foamable resins. Ficel products include endothermic and exothermic formulations.
LAROCHE INDUSTRIES INC.
HCFC-141b environmentally improved blowing agent for rigid polyurethane foam. Replaces CFC-11 in foam blowing, and CFC-11 and CDC-113 in approved solvent applications.
LNP ENGINEERING PLASTICS SUB. OF GE ADVANCED MATERIALS
Foam concentrates include Foam-Kon 20 for resins processed below 450 F, such as ABS, SAN, PP and acetal; and Foam-Kon 28 for resins processed above 450 F, such as nylons, PPS, polysulfone, and polyethersulfone.
PMC SPECIALTIES GROUP, INC. PMC INC.
Chemical blowing agents reportedly produce no corrosive by-products. KemTec 500 is for nylon, polyesters, ABS, and PC.
POLYCHEM ALLOY, INC.
PolyFoam Expancel MB masterbatch contains 40% physical blowing agent, eliminating the need for modifying an existing extruder for injection molded parts. The agent does not escape through molten PE or PP, thus achieving a homogeneously dispersed 100% close cell foam part.
POLYONE CORP. COLOR & ADDITIVE MASTERBATCHES
Wil-Foam chemical blowing-agent concentrates (solid or liquid) for vinyls, polyolefins, styrenics, acrylics, polyesters, and nylons. Custom-made, multicomponent concentrates feature high concentration and superior dispersion. Also concentrates, which can contain colors and other additives, for wire and cable, fibers, film, sheet, profile extrusions, injection and blow molding, and structural foam.
Custom-formulated blowing-agent concentrates for thermoplastics:
* BA20T for EVA and LDPE foamed at 290 to 340 F.
* BA210 for LDPE, HDPE, and PS foamed at 350 to 400 F.
* BA20 for PP, PE, PS, PPE alloys, and ABS foamed at 380 to 440 E
* BA205PT for nylon, polyester, PC, and PPE alloys foamed at 440-540 F.
* BA2575 for high-temperature polymers foamed at 700 F.
Endothermic chemical-foaming agent concentrates available using a variety of polymeric carriers to generate C[O.sub.2] foam structures in extrusion and injection molded applications. When used at low levels, the product, called polyFoam, produces a fine gas bubble size that reduces part weight and improves dimension tolerance in thick-walled parts.
REEDY INTERNATIONAL CORP.
Safoam endothermic chemical nucleating and blowing agents for thermoplastics produced from natural materials and reportedly environmentally safe and nontoxic. Available as free-flowing powders or concentrates. Fast outgassing concentrates in various activity levels contain special carrier resins that improve melt flow, tensile strength, and impact properties in extrusion and injection molding. Help to decrease weight and improve process cycle time. A microcellular structure is created that reduces internal stress, eliminates sink marks, improves surface finish, and cools faster.
Compatible thermoplastics include ABS, PS, EVA, HDPE, LDPE, and PPO/PPE alloys. Also grades for flexible and rigid PVC and moisture-sensitive resins such as nylon, PET, PC, and PC/ABS blends. Cost savings have been reported in the manufacture of PVC and ABS foam pipe, using Safoam concentrates.
In partnership with Genpak Corp., licenses a foam sheet extrusion process that reportedly meets current and future global emission requirements without major equipment changes or compromises in product quality, density, or production rates. Technology is specially designed to replace CFCs and HCFCs in production of PS foam food packaging.
Company is ISO 9001 certified.
A. SCHULMAN, INC.
Polybatch additive concentrates include different carriers and other additives as required.
TECHMER PM, LLC
Complete line of blowing agents for most polymers and applications.
TEKNOR COLOR CO. DIV. OF TEKNOR APEX CO.
Chemical blowing-agent dispersions in concentrates, liquids, or dry-powders. Up to 12.5% azo and hydrazide active ingredients in a universal carrier permit letdowns from 100:1 to 40:1. Suitable for injection molding and extrusion of all polyolefins and styrenics.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||Product Lines Reviewed|
|Date:||Oct 1, 2004|
|Previous Article:||Welding and assembly systems.|
|Next Article:||Polyester curatives.|