Blasting cabinet has a 36" diameter turntable.
The Model SP-10 has a 60"x60"x60" capacity with an
automatic sliding door and is equipped with rails and a transfer cart
that rolls in and out of the finishing enclosure under power. A 36"
diameter turntable on the cart is motor-driven to rotate at controlled
and adjustable speed during the programmed automatic blasting cycle.
Eight suction-feed blast guns are mounted on a swing-arm actuator that
provides horizontal traversing motion synchronized with the rotation of
the component. Each gun is secured on a telescoping bracket that lets
nozzle angles and offsets be adjusted. Designed for use with harsh
mineral grit abrasives, the blast system is supplied with a cyclone
separator and media reclaimer lined with abrasion-resistant urethane rubber. The reclaimer has an in-line magnetic separator to remove any
burrs or metal particles from the blast media. Electronic media level
sensors detect when the supply of grit is low, and the system
replenishes the media from a hopper dispenser. Catch-trays under the
track extension collect blasting grit carried out from the finishing
chamber, and it is pneumatically conveyed back to the media reclaimer.
Guyson Corp. of U.S.A., Saratoga Springs, NY