Printer Friendly

BioStomy: Development of manufacturing process for a novel multi-layer film comprising of a water-soluble polymer and a bio-compostable polymer to enable flushable ostomy pouches.

EU contribution: EUR 50 000

Objective: Ostomy drainage pouches are medical devices made of heavy-duty plastic used to collect waste from a surgically diverted colon, ileum or urinary system. Unfortunately, their disposal can cause users psychological, social, and work-related problems, negatively affecting their quality of life. Soiled ostomy devices become domestic waste and the heavy-duty plastic is non-bio-compostable and so ends up at landfill sites with over 850 million ostomy pouches disposed in landfills annually across the EU representing more than 100,000 tonnes of liquid and plastic waste.

BioStomy seeks to address challenges faced by ostomy pouch users, by providing an industry first, fully flushable ostomy pouch, enabled through the combined use of advanced water soluble and biodegradable material and a novel advanced manufacturing process involving a single co-extrusion of these materials and an adhesive layer.

We anticipate that over a period of five years, we will be able to replace 5.49 million pouches making a profit of 23.79 million and saving over 600 tonnes of plastic waste from landfills. Eucomed estimates that about 0.14% of the total population (700,000 citizens) in the EU has an ostomy and so BioStomy addresses Europe s challenges of an increasingly ageing society and reducing waste by providing an innovative, ostomy pouching system that is environmentally friendly and convenient for users.

In the Phase 1, we intend to investigate the dynamics of the co-extrusion process, study the market and investigate potential alternative applications for our product.

The aim of Phase 2 will be to reduce the thickness of our novel multi-layer material so as to reduce cost and increase usability and manufacturability. Secondly, to prototype and validate a high volume advanced manufacturing process using a single multi-layer differentiated co-extrusion to produce the prescribed film.

Project completion date : 2015-11-01 12:00:00


Address : 5 Leys Avenue, Letchworth Garden City,



Country :United Kingdom

Financier : European Union (EU),

Financier address : European Union (EU)

Rue de la Loi 200/Wetstraat 200,

B-1049 Bruxelles/Brussels,


Tel: 32-2-2999696, 2993085

Fax: 32-2-2961749


2015 Al Bawaba ( Provided by SyndiGate Media Inc. ( ).

COPYRIGHT 2015 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Mena Report
Date:Jun 20, 2015
Previous Article:SPARK: Cost-effective automated process for producing innovative high-performance electric motors.

Terms of use | Copyright © 2017 Farlex, Inc. | Feedback | For webmasters