Printer Friendly

Belt conveyor oven.

The No. 794 is a three-zone, electrically-heated belt conveyor oven, currently in use curing a cast silicone rubber layer onto steel rollers. This unit has a maximum operating temperature of 500[degrees]F and a workspace of 30" wide by 96" deep by 24" high. The conveyor consists of an 18" long open belt loading zone, 36" long insulated unheated entrance vestibule, three 32" long insulated heat zones with independent recirculated airflow and temperature control, 12" long insulated unheated exit vestibule and 60" long open unloading zone. A 90 kW total heat input is installed in Nichrome wire heating elements, with 30 kW per heating zone. Three 1,000 cfm, 1 hp recirculating blowers provide vertical downward airflow to the workload. The No. 794 features an aluminized steel interior and exterior, as well as 4" thick insulated walls, a three-pen, 10" diameter circular chart recorder and a 24" wide, 1" by 1" flatwire conveyor belt with 1/2 hp motor drive and variable speed from 1.5 to 4.3 inches per minute. A customer-specified, multi-color paint finish was also supplied on this conveyor oven. (Grieve)

www.grievecorp.com
COPYRIGHT 2013 Lippincott & Peto, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2013 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:Suppliers Showcase: Equipment
Publication:Rubber World
Date:Mar 1, 2013
Words:189
Previous Article:Multi-shaft mixers.
Next Article:Dry liquid concentrates.
Topics:

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters