Printer Friendly

Ballistic Waterbourne Vests and Flotation.

Tenders are invited for Ballistic Waterbourne Vests and Flotation

Scope Of Work

The Selected Bidder Shall Furnish And Deliver Ballistic Waterborne Vests And Floatation Devices,To Include Plate Ballistic Plate Frames, Mustang Survival Devices And Accessories In Accordance With All Terms And Conditions Outlined In This Solicitation.


1. Ballistic Plates: Leading Technology Composite (ltc) Or Approved Equal A. Ltc Model 23620-3. Ballistic Front And Rear Plates Must Be Neutrally Buoyant And Weigh At Least 2.55 Lbs. Per Plate They Must Be At Least 11.8x9.60 Inches And Must Be At Least 1 Inch Thick. They Must Be Finished In Line-x Coating. They Must Be Nij0101.06 Level Iii Protection.

B. Ltc Model 28711. Side Plates Must Be At Least 6x8 Inches .42 Inches Thick And Weigh At Least 1.20 Lbs. They Must Be Finished In Line-x Coating. They Must Exceed Nij 0101.06 Level Iii Protection.

C. Ltc Model 23600-16. These Must Be Extra-large Front And Rear Plates. The Plates Must Be Neutrally Buoyant And Weigh 3.75 Lbs. Per Plate They Must Be 12.6 X10.0 Inches And They Must

Be 1.5 Inch Thick. They Must Be Finished In Line-x Coating. The Must Meet Nij0101.06 Level Iii Protection.

2. Plate Frame: S&s Precision Or An Approved Equal

A. The Plate Frame Must Be Fully Adjustable To Fit A Wide Range Of Sizes From M-xxxl B. The Plate Frame Must Not Weigh More Than 1 Lb. 6oz., It Must Not Retain Any Water (no Nylon) Due To The Use Of Non-hygroscopic Materials And Welded Seam And It Must Have A Quick Release Feature.

C. The Plate Frame Shall Hold The Plates And Accessories Listed Paragraph 1.b.

D. The Plate Frame Shall Have The Following Pouches Included:

I. M4 Magazine,

Ii. Glock .45 Magazine

Iii. Radio Pouch For Motorola Xts 2500.

3. Life Preservers And Re-arm Kits: Mustang Survival

A. Mustang Survival Model Md3196 S0 In Black. No Substitutes Allowed. Must Be Hydrostatic And/or Manually Inflated Horse Collar Life Preservers. The Department Already Owns These. These Will Be Replacements And Additions To Existing Inventory.

B. Mustang Survival Model Ma7214 10 No Substitutes Allowed. Hydrostatic Re-arm Kit Must Have A Beaded Handle That Allows For Training And Is Used To Re-arm The Horse Collars Listed Above So

They May Be Reused After Training Or During An Operation. Re-arm The Manual And Hydrostatic Are Parts Of The Horse Collars Listed Above.

C. Mustang Survival Model Ma7224 No Substitutes Allowed. Must Be Manual Only Training Re-arm Kit. These Kits Shall Allow For Training And Shall Allow The Horse Collars To Be Inflated Manually.

Major organization : CITY OF NORFOLK

Address : 232 E. Main Street,

Suite 250,

Norfolk, Va 23510.

Country :United States

Email :

Tender notice number : IFB 4804-0-2015EMP

Notice type : Tender Notice

Open date : 2015-08-20

Tender documents : T28698178.pdf

[c] 2015 Al Bawaba ( Provided by SyndiGate Media Inc. ( ).

COPYRIGHT 2015 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Mena Report
Date:Aug 9, 2015
Previous Article:Nauticus - Chiller Replacement.
Next Article:Supply Of Uniforms.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters