Australia : Dyamic real-time video captures how surfaces are modified by nuclear techniques.
A research group including senior materials engineering scientists from ANSTO have successfully overcome the technical problems of evaluating the tensile strength of irradiated materials in situ at a little-studied scale for engineering applications. Their research has elucidated the deformation response of ion irradiated nickel to elongation at the mesoscale and captured images of it.
Senior materials engineering researcher Dhriti Bhattacharyya captured this mechanical response of ion irradiated single crystal thin film nickel in situ using scanning electron microscopy (SEM)producing dynamic real time video of the samples in response to elongation stress.
Subsequent transmission electron microscopy (TEM) confirmed that slip lines were stopped by a layer with a high concentration of helium that is characterised by the presence of voids.
SEM allowed the researchers to observe the deformation process as well as measure the changes in load and elongation.
The results of the collaboration between Ashley Reichardt and Peter Hosemann from the University of California Berkley and ANSTO have been reported in a paper published in Acta Materialia.
Because ion damage is not uniform through the thickness of the sample and penetrates to only a narrow depth, measuring the changes to mechanical properties, such as strength and ductility, requires precise size and orientation of the test sample.
Focused ion beam (FIB) technique was used to cut the sample in the desired shape for tensile testing. The nickel samples were approximately 30 microns long and 1012 microns thick.
High precision in situ micro-mechanical testing technology at ANSTO made it possible to carry out the experiments on these extremely small samples.
These are very difficult experiments to do but the interpretation is relatively easy, said Bhattacharyya, who spent a year and a half mastering and solving the technical challenges in the in situ micro-mechanical testing machine techniques.
Irradiating a target sample with high energy ions can cause the same damage that would require years to accumulate in a nuclear reactor. This type of irradiation makes it easier to handle the test samples as they do not become radioactive in general.
In this research, senior research scientist Mihail Ionescu from the Centre for Accelerator Science accelerated polarised helium across an extremely high electric field in the Star accelerator to cause damage of 10 displacements per atom (dpa) in one sample and 18 dpa in the other sample.
In unirradiated material, the ductile response is explained by slips on the crystallographic planes, which causes strain hardening. As dislocations pass through plastic deformation occurs. One atomic plane is slipping over another in a caterpillar-like motion, said Bhattacharyya.
With increasing stress the material begins to thin down or neck. There is a competition between strain hardening and necking, The unirradiated sample of nickel did not fracture even with 56 per cent elongation.
The irradiated nickel samples responded differently to elongation. Necking did not occur in the highly irradiated sample, said Bhattacharyya. It ruptured at the exit surface.
Using TEM to view a cross section, Bhattacharyya produced an image that shows the slip lines created by the stress did pass through the high damage area but were stopped by voids in the area with the high concentration of helium. These voids act as barriers to dislocation motion.
Although strength was increased by the irradiation, it also increased brittleness. The sample ruptured at 2 per cent elongation and completely fractured at 22 per cent strain.
As you are pulling the whole thing, which is a rigid body, it is trying to deform equally but part of it is deforming plastically and part of it is deforming elastically, explained Bhattacharyya.
In elastic deformation you are pulling atom from atom and will eventually overcome the attractive forces, causing brittle fracture.
The TEM also revealed a dark band, where helium ions had knocked out atoms in a cascade. Some displaced atoms form clusters, which are not very efficient in stopping slip lines.
As part of the experiment, they removed the top damaged layer and then applied stress. Analysis confirmed that the peak damage region with high helium concentration was preventing the dislocations from passing through the whole sample.
The sample with the lesser dose of radiation showed an increase in strength up to 370 MPa but showed a first rupture at 1.7 per cent elongation. Strain jumps and stress drops were followed alternatively by stress rise caused by activation of new channels of dislocation slip.
The current study focused on single grain crystals of nickel. The next step would be to examine a polycrystalline sample. The picture of dislocation motion is more complex in polycrystals because grain boundaries will arrest dislocations.
A more complicated study of micromechanical testing of ion irradiated polycrystalline nickel samples should elucidate the deformation processes in other industrial materials as well, said Bhattacharyya.
[c] 2016 Al Bawaba (Albawaba.com) Provided by SyndiGate Media Inc. ( Syndigate.info ).
|Printer friendly Cite/link Email Feedback|
|Date:||Apr 14, 2016|
|Previous Article:||Australia : New South Wales receives $55.1 million to fix Black Spots.|
|Next Article:||Australia : Steel symposium an opportunity to gain global insights.|