Printer Friendly

Atmel introduces 128-mbit flash memory device.

The AT45DB1228 is a 128-Mbit 2.7V, sequential access Flash memory device that features a 40MHz Rapids[TM] serial interface with SPI compatibility and a 20 MHz Rapid8[TM] 8-bit interface. The RapidS features a four-pin interlace designed to ease system design and reduce power consumption and switching noise. The interface has a maximum read throughput of 5 Mbytes/sec. This device is first in a series of high-density memories manufactured using Atmel's eSTAC[TM] Multi-Level Cell (MLC) memory technology, which allows a single cell to store two bits of information in a very small page size (1,056 bytes for both program and erase). Samples are available now in 44-ball 8 mm X 12 mm CBGA or a 40-in TSOP type-1. Pricing is $10.50 per 100K units Atmel Corp., 2325 Orchard Pkwy., San Jose, CA 95131; (408) 441-0311; Fax: (408) 487-2600; www.atmel.com.

Write in 5003 or www.ecnmag.com/info

COPYRIGHT 2003 Advantage Business Media
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2003 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:ECN-Electronic Component News
Date:May 15, 2003
Words:154
Previous Article:Eight channel bi-directional port expander.
Next Article:Switching power supplies/battery chargers.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters