Printer Friendly

Appendix B: Metric conversion factors, metric prefixes, and other physical conversion factors.

Conversion Factors

Data presented in the Monthly Energy Review and in other U.S. Energy Information Administration publications are expressed predominately in units that historically have been used in the United States, such as British thermal units, barrels, cubic feet, and short tons. The metric conversion factors presented in Table B1 can be used to calculate the metric-unit equivalents of values expressed in U.S. Customary units. For example, 500 short tons are the equivalent of 453.6 metric tons (500 short tons x 0.9071847 metric tons/short ton = 453.6 metric tons).

In the metric system of weights and measures, the names of multiples and subdivisions of any unit may be derived by combining the name of the unit with prefixes, such as deka, hecto, and kilo, meaning, respectively, 10, 100, 1,000, and deci, centi, and milli, meaning, respectively, one-tenth, one-hundredth, and one-thousandth. Common metric prefixes can be found in Table B2.

The conversion factors presented in Table B3 can be used to calculate equivalents in various physical units commonly used in energy analyses. For example, 10 barrels are the equivalent of 420 U.S. gallons (10 barrels x 42 gallons/barrel = 420 gallons).
Table B1. Metric Conversion Factors

Type of           U.S. Unit                           Equivalent in
Unit                                                   Metric Units

Mass              1 short ton (2,000 lb)       =       0.907 184 7
                  1 long ton                   =        1.016 047
                  1 pound (lb)                 =     0.453 592 37 (a)
                  1 pound uranium oxide        =      0.384 647 (b)
                    (lb [U.sub.3][O.sub.8])
                  1 ounce, avoirdupois         =        28.349 52
                    (avdp oz)

Volume            1 barrel of oil (bbl)        =       0.158 987 3

                  1 cubic yard ([yd.sup.3])    =        0.764 555

                  1 cubic foot ([ft.sup.3])    =       0.028 316 85

                  1 U.S. gallon (gal)          =        3.785 412
                  1 ounce, fluid (fl oz)       =        29.573 53
                  1 cubic inch ([in.sup.3])    =        16.387 06

Length            1 mile (mi)                  =      1.609 344 (a)
                  1 yard (yd)                  =       0.914 4 (a)
                  1 foot (ft)                  =       0.304 8 (a)
                  1 inch (in)                  =         2.54 (a)

Area              1 acre                       =         0.404 69
                  1 square mile ([mi.sup.2])   =        2.589 988

                  1 square yard ([yd.sup.2])   =       0.836 127 4

                  1 square foot ([ft.sup.2])   =     0.092 903 04 (a)

                  1 square inch ([in.sup.2])   =       6.451 6 (a)

Energy            1 British thermal unit       =   1,055.055 852 62 (a)
                    (Btu)c
                  1 calorie (cal)              =       4.186 8 (a)
                  1 kilowatthour (kWh)         =         3.6 (a)

Temperature (d)   32 degrees Fahrenheit        =          0 (a)
                    ([degrees]F)
                  212 degrees Fahrenheit       =         100 (a)
                    ([degrees]F)

Type of           U.S. Unit                         Equivalent in
Unit                                                 Metric Units

Mass              1 short ton (2,000 lb)       =   metric tons (t)
                  1 long ton                   =   metric tons (t)
                  1 pound (lb)                 =   kilograms (kg)
                  1 pound uranium oxide        =   kilograms
                    (lb [U.sub.3][O.sub.8])          uranium (kgU)
                  1 ounce, avoirdupois         =   grams (g)
                    (avdp oz)

Volume            1 barrel of oil (bbl)        =   cubic meters
                                                     ([m.sup.3])
                  1 cubic yard ([yd.sup.3])    =   cubic meters
                                                     ([m.sup.3])
                  1 cubic foot ([ft.sup.3])    =   cubic meters
                                                     ([m.sup.3])
                  1 U.S. gallon (gal)          =   liters (L)
                  1 ounce, fluid (fl oz)       =   milliliters (mL)
                  1 cubic inch ([in.sup.3])    =   milliliters (mL)

Length            1 mile (mi)                  =   kilometers (km)
                  1 yard (yd)                  =   meters (m)
                  1 foot (ft)                  =   meters (m)
                  1 inch (in)                  =   centimeters (cm)

Area              1 acre                       =   hectares (ha)
                  1 square mile ([mi.sup.2])   =   square
                                                     kilometers
                                                     ([km.sup.2])
                  1 square yard ([yd.sup.2])   =   square meters
                                                     ([m.sup.2])
                  1 square foot ([ft.sup.2])   =   square meters
                                                     ([m.sup.2])
                  1 square inch ([in.sup.2])   =   square
                                                     centimeters
                                                     ([cm.sup.2])

Energy            1 British thermal unit       =   joules (J)
                    (Btu)c
                  1 calorie (cal)              =   joules (J)
                  1 kilowatthour (kWh)         =   megajoules (MJ)

Temperature (d)   32 degrees Fahrenheit        =   degrees Celsius
                    ([degrees]F)                     ([degrees]C)
                  212 degrees Fahrenheit       =   degrees Celsius
                    ([degrees]F)                     ([degrees]C)

(a) Exact conversion.

(b) Calculated by the U.S. Energy Information Administration.

(c) The Btu used in this table is the International Table Btu adopted
by the Fifth International Conference on Properties of Steam, London,
1956.

(d) To convert degrees Fahrenheit ([degrees]F) to degrees Celsius
([degrees]C) exactly, subtract 32, then multiply by 5/9.

Notes: * Spaces have been inserted after every third digit to the
right of the decimal for ease of reading. * Most metric units belong
to the International System of Units (SI), and the liter, hectare,
and metric ton are accepted for use with the SI units. For more
information about the SI units, see
http://physics.nist.gov/cuu/Units/index.html.

Web Page: http://www.eia.gov/totalenergy/data/monthly/#appendices.

Sources: * General Services Administration, Federal Standard 376B,
Preferred Metric Units for General Use by the Federal Government
(Washington, DC, January 1993), pp.9-11, 13, and 16.* U.S. Department
of Commerce, National Institute of Standards and Technology, Special
Publications 330, 811, and 814.* American National Standards
Institute/Institute of Electrical and Electronic Engineers, ANSI/IEEE
Std 268-1992, pp.28 and 29.

Table B2. Metric Prefixes

Unit Multiple   Prefix   Symbol   Unit Subdivision           Symbol
                                       Prefix

[10.sup.1]       deka      da       [10.sup.-1]      deci      d
[10.sup.2]      hecto      h        [10.sup.-2]      centi     c
[10.sup.3]       kilo      k        [10.sup.-3]      milli     m
[10.sup.6]       mega      M        [10.sup.-6]      micro    [mu]
[10.sup.9]       giga      G        [10.sup.-9]      nano      n
[10.sup.12]      tera      T        [10.sup.-12]     pico      p
[10.sup.15]      peta      P        [10.sup.-15]     femto     f
[10.sup.18]      exa       E        [10.sup.-18]     atto      a
[10.sup.21]     zetta      Z        [10.sup.-21]     zepto     z
[10.sup.24]     yotta      Y        [10.sup.-24]     yocto     y

Web Page: http ://www.eia.gov/totalenergy/data/monthly/#appendices.

Source: U.S. Department of Commerce, National Institute of Standards
and Technology, The International System of Units (SI), NIST Special
Publication 330, 1991 Edition (Washington, DC, August 1991), p.10.

Table B3. Other Physical Conversion Factors

Energy      Original Unit         Equivalent in Final Units
Source

Petroleum   1 barrel (bbl)     =     42 (a)    U.S. gallons (gal)
Coal        1 short ton        =  2,000 (a)    pounds (lb)
            1 long ton         =  2,240 (a)    pounds (lb)
            1 metric ton (t)   =  1,000 (a)    kilograms (kg)
Wood        1 cord (cd)        =   1.25 (b)    shorts tons
            1 cord (cd)        =    128 (a)    cubic feet
                                                 ([ft.sup.3])

(a) Exact conversion.

(b) Calculated by the U.S. Energy Information Administration.

Web Page: http://www.eia.gov/totalenergy/data/monthly/#appendices.

Source: U.S. Department of Commerce, National Institute of Standards
and Technology, Specifications, Tolerances, and Other
Technical Requirements for Weighing and Measuring Devices, NIST
Handbook 44, 1994 Edition (Washington, DC, October 1993), pp. B-10,
C-17, and C-21.
COPYRIGHT 2016 US Department of Energy
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2016 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Comment:Appendix B: Metric conversion factors, metric prefixes, and other physical conversion factors.
Publication:Monthly Energy Review
Article Type:Table
Geographic Code:1USA
Date:Sep 1, 2016
Words:1114
Previous Article:Appendix A: British thermal unit conversion factors.
Next Article:Appendix C.
Topics:

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |