Printer Friendly

An attractive chuck.

The electro-magnetic, Power Matrix chuck offers up to 132 tons of holding force per ft2 for machining applications. These chucks allow milling on five faces for high metal removal rates while eliminating vises and H-clamps for faster part setup, according to the maker. Power Matrix chucks offer multipoint clamping for parts including round, stepped, or shaped ones. Parts can be mounted directly to the chuck's face or steel mounting blocks can be used that let the magnetism flow through them for positive part holding. They come in standard sizes from 400mm x 250mm x 68mm to 1,000mm x 600mm x 68mm. They are available with either a detachable cable or a hardwired version. Storch Magnetics

[ILLUSTRATION OMITTED]

www.rsleads.com/904mn-245
COPYRIGHT 2009 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2009 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:New Products
Publication:Modern Applications News
Date:Apr 1, 2009
Words:122
Previous Article:Power from the fourth generation.
Next Article:VMC is feature-full.

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters