Printer Friendly

Articles from AmCham Egypt Tenders Alert Service (TAS) (September 18, 2011)

1-24 out of 24 article(s)
Title Author Type Words
Elevation of the warehouses building at the Faculty. 104
Maintenance of decorative public lighting rods. 110
Maintenance of the electrical works pertaining to the old training center building at the workshops complex. 114
Manufacturing & supply of 12 flanges required for the condensers of Unit 13 for (lube) oils. 109
Rehabilitation/ replacement of (a) four complete spiral feathers with tubes required for phase one of the screw type lifting station in Al Qalaj, also (b) the 3.3 kV starter engines' board of 1,036 KW capacity required for the New Cairo City's Center lift. 163
Repair of six pickup vehicles. 102
Request of offers from companies & agents for the supply of one digital camera with related accessories for delivery ex stock & for settlement in local currency. 129
Supply & erection of (a) 34 dry battery sets (34 x 300 Ah - 48 volt), (b) 13 dry battery sets (5 x 1,000 Ah & 8 x 500 Ah - 48 volt) & (c) 3 dry battery sets (3 x 200 Ah - 48 volt) on turn key. Job is divisible. 153
Supply & erection of (a) 5 gear boxes to serve aeration basins at Al Berka waste water treatment plant & (b) supply of different diameter clips required for the fast repair of discharge pipelines. 145
Supply & erection of 74 locally assembled air conditioners. 107
Supply & erection of Kitchen equipment & instruments. 109
Supply & implementing the required works for the electrification of 10 underground productive water wells within Menoufiya Governorate. 141
Supply of (a) cement, (b) tiles, (c) bricks & (d) steel (rebars) in 4 lots. 120
Supply of (a) general purpose medical requisites, (b) laboratory requisites & (c) dental medicine requisites in three lots. 119
Supply of (a) printed stationery, also (b) paints & hardware items. 120
Supply of 4 tons dry chemical powder among other items for the Civil Defense Dept. 114
Supply of 76 submersible water lifting units with all related auxiliaries & accessories. 117
Supply of an energy saving 270 to 300 tons capacity plastic injection machine equipped with an overhead crane for the lifting & lowering of moulds, also of a dryer for the plastic polycarbonate materials, a suction device to carry to carry raw materials t. 163
Supply of belts for Nasr 871 & 966 buses with Deutz & Iveco engines mounted thereon. 123
Supply of different mechanical & electrical parts for Thomas buses & their Cummins engines under seven contracts. Deadlines 10/9, 10/10, 10/11, 10/12, 10/13, 10/15 & 10/16/2011. 142
Supply of fiber optic cables welding machines. 108
Supply of laboratory chemicals & dissolvent. 119
Supply of rubber tires & batteries. 104
Supply of safety air bags for the C 120 Mercedes buses. 122

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |