Printer Friendly

Articles from Advances in Tribology (January 1, 2018)

1-18 out of 18 article(s)
Title Author Type Words
A Novel Analytical Method to Calculate Wheel-Rail Tangential Forces and Validation on a Scaled Roller-Rig. Bosso, Nicola; Zampieri, Nicolo Report 7233
A Study of Hydromagnetic Longitudinal Rough Circular Step Bearing. Adeshara, Jatinkumar V.; Prajapati, M.B.; Deheri, G.M.; Patel, R.M. Report 2766
Comparative Experimental Study of Tribo-Mechanical Performance of Low-Temperature PVD Based TiN Coated PRCL Systems for Diesel Engine. Uddin, Ghulam Moeen; Kamran, Muhammad Sajid; Ahmad, Jawad; Ghufran, Muhammad; Asim, Muhammad; Zafar, Report 6693
Effect of Size of Multiwalled Carbon Nanotubes Dispersed in Gear Oils for Improvement of Tribological Properties. Chebattina, Kodanda Rama Rao; Srinivas, V.; Rao, N. Mohan Report 6260
Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings. Pichler, Philip; Leitner, Martin; Grun, Florian; Hassler, Jurgen Report 4971
Experimental and Theoretical Analysis of Zircaloy-4 and AISI 304 Stainless Steel Material Pair in Water Sliding Conditions. Khare, Neelima; Limaye, Praveen Kumar; Singh, Kulwant; Jadhav, Dhananjay Tatyasaheb; Bute, Arundhati Report 3573
FEM Design of a Cutting-Edge Support System for Micro-GT. Stefani, Fabrizio; Francesconi, Ramon; Perrone, Andrea Report 7134
Microstructural Evolution in Chroming Coatings Friction Pairs under Dry Sliding Test Conditions. Wang, Xin; Zhang, Rulin; Zhou, Tao; Wei, Xicheng; Liaw, Peter; Feng, Rui; Wang, Wurong; Li, Rongbin Report 2955
Numerical Analysis of Elastic Contact between Coated Bodies. Spinu, Sergiu Report 8186
Numerical Investigation of Turbulence Models for a Superlaminar Journal Bearing. Ding, Aoshuang; Ren, Xiaodong; Li, Xuesong; Gu, Chunwei Report 6877
Partial Contact of a Rigid Multisinusoidal Wavy Surface with an Elastic Half-Plane. Tsukanov, Ivan Y. Report 4088
Performance Evaluation of Jatropha and Pongamia Oil Based Environmentally Friendly Cutting Fluids for Turning AA 6061. Jeevan, T.P.; Jayaram, S.R. Report 4764
Processing and Wear Behaviour of 3D Printed PLA Reinforced with Biogenic Carbon. Ertane, Ertan G.; Dorner-Reisel, Annett; Baran, Ozlem; Welzel, Thomas; Matner, Viola; Svoboda, Stefa Report 6555
Recirculation Flow and Pressure Distributions in a Rayleigh Step Bearing. Shen, Feng; Yan, Cheng-Jin; Dai, Jian-Feng; Liu, Zhao-Miao Report 4243
The Contact Mechanics of Novikov's Surface-Hardened Gearing during Running-in Process. Beskopylny, Alexey; Onishkov, Nikolay; Korotkin, Viktor Report 5252
Theoretical Analysis of the Influence of Asperity's Dimensions Affected by a Scale Factor on the Mixed Lubrication between Parallel Surfaces. Robbe-Valloire, F.; Progri, R.; Botelho, T. Da Silva Report 7225
Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites. Shivamurthy, B.; Murthy, Krishna; Anandhan, S. Report 4440
Viscoelastic Contact Simulation under Harmonic Cyclic Load. Spinu, Sergiu Report 10564

Terms of use | Privacy policy | Copyright © 2019 Farlex, Inc. | Feedback | For webmasters