Printer Friendly

Articles from Advances in Materials Science and Engineering (December 31, 2019)

1-46 out of 46 article(s)
Title Author Type Words
Adaptive Navigating Control Based on the Parallel Action-Network ADHDP Method for Unmanned Surface Vessel. Huang, Zhijian; Liu, Xinze; Wen, Jiayi; Zhang, Guichen; Liu, Yihua 4224
Analysis of the Sedimentation Characteristics of Ultrafine Tailings Based on an Orthogonal Experiment. Li, Chang-Hong; Shi, Yue-Qi; Liu, Peng; Guo, Ning 5105
Antibacterial Activity of Visible Light-Activated Ti[O.sub.2] Thin Films with Low Level of Fe Doping. Meng, Dan; Liu, Xiuhua; Xie, Yun; Du, Yang; Yang, Yong; Xiao, Chao 5010
Bond Properties of RAC-Filled Square Steel Tubes after High Temperature. Zou, Wanjie; Liang, Jiongfeng; Zhang, Guangwu; Yang, Haifeng 4612
Brazeability, Microstructure, and Joint Characteristics of Zr[O.sub.2]/Ti-6Al-4V Brazed by Ag-Cu-Ti Filler Reinforced with Cerium Oxide Nanoparticles. Sharma, Ashutosh; Ahn, Byungmin 6123
Characteristics of A6061/(Glass Fibre + [AL.sub.2][O.sub.3] + SiC + [B.sub.4]C) Reinforced Hybrid Composite Prepared through STIR Casting. Nanjan, Subramani; Janakiram, Ganesh Murali 4732
Compilation and Application of UMAT for Mechanical Properties of Heterogeneous Metal Welded Joints in Nuclear Power Materials. Xue, He; Bi, Yueqi; Wang, Shuai; Zhang, Jianlong; Gou, Siyu 5667
Corrosion Resistance of DLC Film-Coated SUS316L Steel Prepared by Ion Beam Enhanced Deposition. Han, Bei B.; Ju, Dong Y.; Chai, Mao R.; Zhao, Hui J.; Sato, Susumu 7010
Effect of Shear Creep on Long-Term Deformation Analysis of Long-Span Concrete Girder Bridge. Niu, Yanwei; Tang, Yingying 5834
Effects of Adhesive Parameters on Dispersion Characteristics of Ultrasonic Guided Waves in Composite Pipes. Li, Juanjuan; Han, Yan 4630
Equation for the Degradation of Uniaxial Compression Stress of Concrete due to Freeze-Thaw Damage. Yang, Xiaolin; Wang, Genhui; Gao, Shiwu; Song, Min; Wang, Anqi 4007
Evaluation of the Mechanical Properties of Porous Thermoplastic Polyurethane Obtained by 3D Printing for Protective Gear. Lee, Hyojeong; Eom, Ran-i; Lee, Yejin 5851
Experimental Evaluation of the Influences of Water on the Fracture Toughness of Mudstones with Bedding. Yang, Jianfeng; Li, Li; Lian, Haojie 8052
Experimental Study on Macro-Mesoscopic Components and Indexes of Buton Gilsonite-Modified Asphalt. Y1ng, Sanqiang; Zhou, Xiaoyu; Qin, Lusheng; Liu, Na; Cai, Yongli Report 4668
Experimental Study on Manufactured Sand-Soil Bearing Capacity W-T-BC Model Based on Mechanical Response of Rotary Penetration. Lv, Xiangfeng; Zhang, Shuo; Zhou, Hongyuan Report 6254
Experimental Study on Normal Frost-Heave Force Generated from Loess upon Freezing considering Multiple Factors. Zhao, Zai-Kun; Wang, Tie-Hang; Jin, Xin; Zhang, Yu 5350
Experimental Study on the Influence of Moisture Content during Gas Depressurization Extraction. Chen, Yuexia; Chen, Xuexi; Xu, Jiang; Chu, Tingxiang 5194
Field Experimental Study on the Broken Rock Zone of Surrounding Rock and the Rock Borehole Shear Tests of the Large Deformation Tunnel. Han, Guansheng; Meng, Bo; Jing, Hongwen; Wu, Jiangyu Report 4438
H-M Bearing Capacity of Cone-Shaped Foundation for Onshore Wind Turbine under Monotonic Horizontal Loading. Xing, GuoQi; Liu, ChangJiang; Li, ShanShan; Xuan, Wei 6854
Hardening Concrete Exposed to Realistic Curing Temperature Regimes and Restraint Conditions: Advanced Testing and Design Methodology. Klausen, Anja Estensen; Kanstad, Terje; Bjentegaard, yvind 9709
Hot Deformation Behavior and Microstructural Evolution of Twin-Roll-Casting Mg Alloy during High-Temperature Compression. Yang, Qingshan; Dai, Jiahong; Chai, Sensen; Yu, Daliang; Jiang, Bin; Pan, Fusheng 2840
Influence of Existing Defects on Mechanical Properties of NC Lining. Zhang, Sen; Ren, Zhihua; Ding, Zude; Wen, Jincheng; Yan, Zhixin 7011
Influence of Pore Structure on Chloride Penetration in Cement Pastes Subject to Wetting-Drying Cycles. Chang, Honglei; Zuo, Zhiwu; Qu, Mingyue; Wang, Fei; Ge, Zhi; Liu, Jian 6807
Interaction of Screw Dislocation with Edge Interfacial Crack on Fine-Grained Piezoelectric Coating/Substrate. Hu, Shuaishuai; Liu, Jiansheng; Li, Junlin; Xie, Xiufeng 5387
Internal Force Transfer Mechanism and Bearing Capacity of Vertical Stiffener Joints in CFDST Structures. Zhang, Yufen; Zhang, Dongfang; Demoha, Krushar 6693
Investigation of the Performance of the Ecofriendly Fiber-Reinforced Asphalt Mixture as a Sustainable Pavement Material. Guan, Bowen; Liu, Jianan; Wu, Jiayu; Liu, Jingyi; Tian, Haitao; Huang, Tengbin; Liu, Chengcheng; Ren 6157
Material and Structural Properties of Fiber-Reinforced Resin Composites as Thin Overlay for Steel Bridge Deck Pavement. Zhang, Hui; Zhou, Chengqi; Li, Kuan; Gao, Peiwei; Pan, Youqiang; Zhang, Zhixiang 6022
Microstructure and Mechanical Properties of the Cold-Rolled Mg-14Li-1Zn Alloy after Hot Rolling. Wu, Qiang; Fu, Running; Wu, Ruizhi; Zhang, Jinghuai; Hou, Legan; Zhang, Milin 2771
Modelling of Permeation Grouting considering Grout Self-Gravity Effect: Theoretical and Experimental Study. Fu, Yanbin; Wan, Xiuling; Zhang, Sizhan; Yang, Yong Report 6866
On the Elevated Temperature, Tensile Properties of Al-Cu Cast Alloys: Role of Heat Treatment. Girgis, A.; Samuel, A.M.; Doty, H.W.; Valtierra, S.; Samuel, F.H. 7884
Optimization and Hydration Mechanism of Composite Cementing Material for Paste Filling in Coal Mines. Liu, Jinxiao; Li, Wenxin; Zhang, Feng; Zhang, Xinguo; Chen, Lianjun; Liu, Yongle 7427
Pore Structure Characterization of Hardened Cement Paste by Multiple Methods. Song, Yang; Zhou, Jun-Wen; Bian, Zheng-Ning; Dai, Guo-Zhong 8670
Probability of Exceeding Damage States in Plates Using BEM. Pineda-Leon, Ernesto; Rosales-Juarez, Jose Manuel; Tolentino, Dante; Susarrey-Huerta, Orlando 5201
Research on Multipass Hot Spinning Process Technology of AZ80 Magnesium Alloy Shell. Liang, Wei; Guan, Lin; Lv, Qiongying; Xing, Zhigang 5641
Research on the Dynamic Mechanical Properties and Energy Dissipation of Expansive Soil Stabilized by Fly Ash and Lime. Zhou, Sheng-Quan; Zhou, Da-Wei; Zhang, Yong-Fei; Wang, Wei-Jian; Li, Dongwei 6581
Semisolid Compression Brazing of Al50Si Alloy Using Zn-Al-Cu Filler Metal Assisted by SiC Particles. Xiao, Jing; Li, Shun; Bai, Shuxin; Xiong, Degan; Tang, Yu 4970
Spinning Process Test and Optical Topography Measurement Technology for the Shell with Longitudinal and Latitudinal Inner Ribs. Liang, Wei; Lv, Qiongying; Guan, Lin; Xing, Zhigang 7363
Strengthening and Rehabilitation of U-Shaped RC Bridges Using Substitute Cable Ducts. Svoboda, Adam; Klusacek, Ladislav; Olsak, Martin 13375
Structural Design of Mechanical Property for Biodegradable Polymeric Stent. Wei, Yunbo; Wang, Minjie; Zhao, Danyang; Li, Hongxia; Jin, Yifei 8032
Study on Simulation of Stamping Process and Optimization of Process Parameters of Fender. Wu, Peng; Wang, Youming; Wan, Peng Report 5093
Sustainable Development of Corrosion Inhibitors from Electronic Scrap: Synthesis and Electrochemical Performance. Porcayo-Calderon, J.; Ramos-Hernandez, J.J.; Porcayo-Palafox, E.; de la Escalera, L.M. Martinez; Can 7343
Synthesis and Application of Fe-Doped Ti[O.sub.2]-Halloysite Nanotubes Composite and Their Potential Application in Water Treatment. Nyankson, Emmanuel; Agyei-Tuffour, Benjamin; Adjasoo, Jonas; Ebenezer, Annan; Dodoo-Arhin, David; Ya 8999
Synthesis and Characterization of CeGdZn-Ferrite Nanoparticles as Magnetic Hyperthermia Application Agents. Hayek, Saleh S. 4903
The Application of Hyaluronic Acid-Based Hydrogels in Bone and Cartilage Tissue Engineering. Li, Hongru; Qi, Zhiping; Zheng, Shuang; Chang, Yuxin; Kong, Weijian; Fu, Chuan; Yu, Ziyuan; Yang, Xi 8989
The Effect of Yttrium Addition on the Microstructures and Electrical Properties of CuMn Alloy Thin Films. Lee, Ho-Yun; He, Chi-Wei; Lee, Ying-Chieh 3202
Tracking Control of a Galfenol-Actuated Nanopositioning Stage Using Feedforward Control with a Disturbance Observer. Jiang, Shiping; Xu, Bin; Liu, Shuxin; Zhu, Wei 3519

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |