Title  |
Author |
Type |
Words |
| A comparative analysis of the flow properties between two alumina-based dry powders. |
de Campos, Milene Minniti; Ferreira, Maria do Carmo |
|
5341 |
| A current transport mechanism on the surface of Pd-Si[O.sub.2] mixture for metal-semiconductor-metal GaAs diodes. |
Tan, Shih-Wei; Lai, Shih-Wen |
|
1884 |
| A frame element model for the nonlinear analysis of FRP-strengthened masonry panels subjected to in-plane loads. |
Grande, Ernesto; Imbimbo, Maura; Rasulo, Alessandro; Sacco, Elio |
|
5214 |
| A humidity sensor based on silver nanoparticles thin film prepared by electrostatic spray deposition process. |
Thiwawong, Thutiyaporn; Onlaor, Korakot; Tunhoo, Benchapol |
|
3999 |
| A kinetic study of micronization grinding of dry mica in a planetary ball mill. |
Andric, Ljubisa; Terzic, Anja; Acimovic-Pavlovic, Zagorka; Trumic, Milan; Petrov, Milan; Pavlovic, L |
|
3543 |
| A nonlocal model for carbon nanotubes under axial loads. |
Barretta, Raffaele; de Sciarra, Francesco Marotti |
|
3294 |
| A nonmonotonous damage model to characterize mullins and residual strain effects of rubber strings subjected to transverse vibrations. |
Elias-Zuniga, Alex; Baylon, Karen; Martinez-Romero, Oscar; Rodriguez, Ciro A.; Siller, Hector R. |
|
5443 |
| A review of structural performance of oil palm empty fruit bunch fiber in polymer composites. |
Mahjoub, Reza; Yatim, Jamaludin Bin Mohamad; Sam, Abdul Rahman Mohd |
|
4596 |
| A review on tribological behaviour of polymeric composites and future reinforcements. |
Aldousiri, B.; Shalwan, A.; Chin, C.W. |
|
5967 |
| A study in physical and mechanical properties of hemp fibres. |
Shahzad, Asim |
|
6532 |
| A study on the influence of the forming strategy on the main strains, thickness reduction, and forces in a single point incremental forming process. |
Blaga, Adrian; Oleksik, Valentin |
|
4838 |
| A substrate-and-gate triggering NMOS device for high ESD reliability in deep submicrometer technology. |
Huang, Chih-Yao; Chiu, Fu-Chien |
|
3214 |
| Adhesion of E. coli bacteria cells to prosthodontic alloys surfaces modified by Ti[O.sub.2] sol-gel coatings. |
Banaszek, Katarzyna; Szymanski, Witold; Pietrzyk, Bozena; Klimek, Leszek |
|
3233 |
| Aerogels in aerospace: an overview. |
Bheekhun, Nadiir; Talib, Rahim Abu; Hassan, Roshdi |
|
15259 |
| Aerogels materials as space debris collectors. |
Woignier, Thierry; Duffours, Laurent; Colombel, Pascale; Durin, Christian |
|
3338 |
| Al and Si influences on hydrogen embrittlement of carbide-free bainitic steel. |
Li, Yanguo; Chen, Cheng; Zhang, Fucheng |
|
3905 |
| Aluminum silicate nanotube modification of cotton-like siloxane-poly(L-lactic acid)-vaterite composites. |
Lee, Daiheon; Maeda, Hirotaka; Obata, Akiko; Inukai, Keiichi; Kato, Katsuya; Kasuga, Toshihiro |
|
3678 |
| An alternative to clay in building materials: red mud sintering using fly ash via Taguchi's methodology. |
Rai, Suchita; Lataye, Dilip H.; Chaddha, M.J.; Mishra, R.S.; Mahendiran, P.; Mukhopadhyay, J.; Yoo, |
|
5557 |
| An assessment of the effects of micron-particle aggregation on the performance of zinc-silica composite coatings using Betti numbers. |
Xu, Jianxin; Sang, Xiuli; Wang, Hua; Fan, Yunying |
|
3978 |
| An experimental simulation to validate FEM to predict transverse young's modulus of FRP composites. |
Sai, V.S.; Satyanarayana, M.R.S.; Murthy, V.B.K.; Rao, G.S.; Prasad, A.S. |
|
2938 |
| An experimental study on heat conduction and thermal contact resistance for the A1N flake. |
Chou, Huann-Ming; Wang, Jin-Chi; Chang, Yuh-Ping |
|
1980 |
| An inverse method to reconstruct complete stiffness information of rubber bushing. |
Lei, Gang; Chen, Qian; Liu, Ying; Jiang, Jingjing |
|
2679 |
| Analysis and testing of chain characteristics and rheological properties for magnetorheological fluid. |
Chen, Song; Huang, Jin; Shu, Hongyu; Sun, Tiger; Jian, Kailin |
|
3019 |
| Analysis and testing of MR shear transmission driven by SMA spring. |
Huang, Jin; Chen, Xu; Zhong, Lirong |
|
2964 |
| Analysis of the dynamic response in blast-loaded CFRP-strengthened metallic beams. |
Wang, Zhenyu; Zhao, Yang; Liang, Xu; He, Zhiguo |
|
8739 |
| Analysis on the manufacturing of an AA5083 straight blade previously ECAE processed. |
Salcedo, Daniel; Luis, Carmelo; Puertas, Ignacio; Leon, Javier; Fuertes, Juan Pablo; Luri, Rodrigo |
|
2933 |
| Analytical optimization of piezoelectric circular diaphragm generator. |
Mohammadi, S.; Abdalbeigi, M. |
|
4100 |
| Application of electron beam melting to the removal of phosphorus from silicon: toward production of solar-grade silicon by metallurgical processes. |
Sasaki, Hideaki; Kobashi, Yoshifumi; Nagai, Takashi; Maeda, Masafumi |
|
5467 |
| Application of macrofiber composite for smart transducer of lamb wave inspection. |
Ren, Gang; Jhang, Kyung-Young |
|
1917 |
| Average fracture energy for crack propagation in postfire concrete. |
Yu, Kequan; Yu, Jiangtao; Lu, Zhoudao |
|
8156 |
| Axial-compressive behavior, including kink-band formation and propagation, of single p-phenylene terephthalamide (PPTA) fibers. |
Grujicic, M.; Ramaswami, S.; Snipes, J.S.; Yavari, R.; Yen, C.-F.; Cheeseman, B.A. |
|
8719 |
| Behavior of concrete columns repaired with polymer mortar and epoxy fiber panel. |
Hong, Sungnam; Park, Sun-Kyu |
|
4701 |
| Biopolymer doped with titanium dioxide superhydrophobic photocatalysis as self-clean coating for lightweight composite. |
Rus, Anika Zafiah M.; Mohid, S.R.; Nurulsaidatulsyida, S.; Marsi, N. |
|
4286 |
| Blast-resistant improvement of sandwich armor structure with aluminum foam composite. |
Yang, Shu; Qi, Chang |
|
3473 |
| Calculation of liquidus temperature for aluminum and magnesium alloys applying method of equivalency. |
Djurdjevic, Mile B.; Manasijevic, Srecko; Odanovic, Zoran; Dolic, Natalija |
|
4526 |
| CFD study on wall/nanoparticle interaction in nanofluids convective heat transfer. |
Tarybakhsh, Mohammad Reza; Neyestanak, Ali Akbar Lotfi; Tarybakhsh, Hamed |
Report |
3323 |
| Characterisation and properties of lithium disilicate glass ceramics in the Si[O.sub.2]-[Li.sub.2]O-[K.sub.2]O- [Al.sub.2][O.sub.3] system for dental applications. |
Monmaturapoj, Naruporn; Lawita, Pornchanok; Thepsuwan, Witoon |
|
8374 |
| Characteristics analysis and testing of SMA spring actuator. |
Ma, Jianzuo; Huang, Haolei; Huang, Jin |
|
2537 |
| Characteristics of carbon nanospheres prepared from locally deoiled asphalt. |
Mohammed, Mohammed Ibrahim; Ibrahim, Raheek Ismaeel; Mahmoud, Luma Hussein; Zablouk, Mumtaz Abdulaha |
|
2061 |
| Characterization of ladle furnace slag from carbon steel production as a potential adsorbent. |
Radenovic, Ankica; Malina, Jadranka; Sofilic, Tahir |
|
4366 |
| Charge-trapping devices using multilayered dielectrics for nonvolatile memory applications. |
Shih, Wen-Chieh; Cheng, Chih-Hao; Lee, Joseph Ya-min; Chiu, Fu-Chien |
|
3390 |
| Comparative performance of PLZT and PVDF pyroelectric sensors used to the thermal characterization of liquid samples. |
Hernandez, Gemima Lara; Cruz-Orea, Alfredo; Gomez, Ernesto Suaste; Cuautle, Jose Jesus Agustin Flore |
|
3206 |
| Comparison of microstructural and morphological properties of electrodeposited Fe-Cu thin films with low and high Fe: Cu ratio. |
Sarac, Umut; Baykul, M. Celalettin |
|
4110 |
| Comparison of urea and citric acid complexing agents and annealing temperature effect on the structural properties of [gamma]-and [alpha]-alumina nanoparticles synthesized by sol-gel method. |
Rajaeiyan, A.; Bagheri-Mohagheghi, M.M. |
|
5096 |
| Compression of multilayered composite electrospun scaffolds: a novel strategy to rapidly enhance mechanical properties and three dimensionality of bone scaffolds. |
Madurantakam, Parthasarathy A.; Rodriguez, Isaac A.; Garg, Koyal; McCool, Jennifer M.; Moon, Peter C |
|
4670 |
| Contribution of process annealing on the development of microstructure and texture of Cu-30Zn brass. |
Hagos, S.; Verma, A.K.; Mukhopadhyay, Prantik; Singh, A.K. |
|
3283 |
| Critical assessment of temperature distribution in submerged arc welding process. |
Negi, Vineet; Chattopadhyaya, Somnath |
|
4304 |
| Curing pressure influence of out-of-autoclave processing on structural composites for commercial aviation. |
Drakonakis, Vasileios M.; Seferis, James C.; Doumanidis, Charalambos C. |
|
6822 |
| Cutting NiTi with femtosecond laser. |
Quintino, L.; Liu, L.; Miranda, R.M.; Silva, R.J.C.; Hu, A.; Zhou, Y. |
|
1586 |
| Damage characterization of polypropylene honeycomb sandwich panels subjected to low-velocity impact. |
Amir, Freeda A.; Othman, A.R.; Akil, H. |
|
4275 |
| Deacidification of soybean oil combining solvent extraction and membrane technology. |
Fornasero, M.L.; Marenchino, R.N.; Pagliero, C.L. |
|
3109 |
| Deformation properties and fatigue of bituminous mixtures. |
Schlosser, Frantisek; Mikolaj, Jan; Zatkalikova, Viera; Sramek, Juraj; Durekova, Dominika; Remek, Lu |
|
3445 |
| Degradation in seawater of structural adhesives for hybrid fibre-metal laminated materials. |
Alia, Cristina; Biezma, Maria V.; Pinilla, Paz; Arenas, Jose M.; Suarez, Juan C. |
|
5539 |
| Dependence of microcrack behavior in wood on moisture content during drying. |
Yamamoto, Hiroyuki; Sakagami, Hiroki; Kijidani, Yoshio; Matsumura, Junji |
|
3960 |
| Deposition of low stress silicon nitride thin film and its application in surface micromachining device structures. |
Zheng, Beirong; Zhou, Chen; Wang, Quan; Chen, Yifeng; Xue, Wei |
|
2471 |
| Design and analytical evaluation of a new self-centering connection with bolted T-stub devices. |
Aliabadi, Mahbobeh Mirzaie; Bahaari, Mohammad Reza; Torabian, Shahabeddin |
|
7161 |
| Design and evaluation of photo-induced biofeedback fabric for the enhancement in sleeping sense. |
Chu, Wei-Cheng; Lin, Hsin-Ju; Chiu, Shu-Ping |
|
7691 |
| Design and fabrication of the large thrust force piezoelectric actuator. |
Chang, Shyang-Jye; Chen, Jing |
|
2615 |
| Design of a plant leaf area meter using PV cell and embedded microcontroller. |
Engin, Dilsad; Engin, Mustafa |
|
5379 |
| Development and performance evaluation of very high early strength geopolymer for rapid road repair. |
Hawa, Abideng; Tonnayopas, Danupon; Prachasaree, Woraphot; Taneerananon, Pichai |
|
4181 |
| Dielectric and ferroelectric properties of lead-free [1 - z {[([Bi.sub.1-x][La.sub.x]).sub.0.5][([Na.sub.1-y][Li.sub.y]).sub.0.5] Ti[O.sub.3]}-zBaTi[O.sub.3]] ceramic system. |
Pal, Vijayeta; Dwivedi, R.K.; Thakur, O.P. |
|
4862 |
| Direct synthesis of ([K.sub.0.5][Na.sub.0.5])Nb[O.sub.3] powders by mechanochemical method. |
Van, Nguyen Duc |
|
2284 |
| Durability evaluation in concrete using cracked permeability and chloride permeability tests. |
Sounthararajan, V.M.; Sivakumar, A. |
|
3998 |
| Dynamic properties and fatigue life of stone mastic asphalt mixtures reinforced with waste tyre rubber. |
Mashaan, Nuha Salim; Ali, Asim H.; Koting, Suhana; Karim, Mohamed Rehan |
|
5695 |
| Dynamic shear characteristic and fracture feature of Inconel 690 alloy under different high strain rates and temperatures. |
Chen, Tao-Hsing; Tsai, Chih-Kai; Fang, Te-Hua |
|
2405 |
| Effect of Ar/C[H.sub.4] mixture ratio on properties of Ag/C:H nanocomposite prepared by DC sputtering. |
Soltani, E. Mohsen; Ghorannevis, Z.; Shirazi, M. |
|
4164 |
| Effect of cation distribution on structural and magnetic properties of nickel cobalt zinc ferrites. |
Azhagushanmugam, S.J.; Suriyanarayanan, N.; Jayaprakash, R. |
|
2178 |
| Effect of chemical treatment on physical, mechanical and thermal properties of ladies finger natural fiber. |
Hossain, S.I.; Hasan, M.; Hasan, N.; Hassan, A. |
|
2574 |
| Effect of cobalt fillers on polyurethane segmentations investigated by synchrotron small angle X-ray scattering. |
Koyvanich, Krit; Sirisathitkul, Chitnarong; Rugmai, Supagorn |
|
2587 |
| Effect of coercive voltage and charge injection on performance of a ferroelectric-gate thin-film transistor. |
Tue, P.T.; Miyasako, T.; Tokumitsu, E.; Shimoda, T. |
|
3855 |
| Effect of environmental degradation on mechanical properties of kenaf/polyethylene terephthalate fiber reinforced polyoxymethylene hybrid composite. |
Abdullah, Mohamad Zaki; Dan-mallam, Yakubu; Yusoff, Puteri Sri Melor Megat |
|
4804 |
| Effect of ground waste concrete powder on cement properties. |
Ma, Xianwei; Wang, Zhenyu |
|
2424 |
| Effect of magnesium sulphate on self-compacting concrete containing supplementary cementitious materials. |
Hassan, Aiad; Mahmud, Hilmi Bin; Jumaat, Zamin; ALsubari, Belal; Abdulla, Aziz |
|
4080 |
| Effect of mandrel on cross-section quality in numerical control bending process of stainless steel 2169 small diameter tube. |
Fang, Jun; Lu, Shiqiang; Wang, Kelu; Xu, Jianmei; Xu, Xiaomei; Yao, Zhengjun |
|
5306 |
| Effect of process parameters on gas nitriding of grey cast iron. |
Wang, Nana; Liu, Jinxiang |
|
3393 |
| Effect of size distribution on the dust acoustic solitary waves in dusty plasma with two kinds of nonthermal ions. |
Moghadam, Samira Sharif; Dorranian, Davoud |
|
4290 |
| Effect of soil burial on tensile properties of polypropylene/plasticized cassava starch blends. |
Obasi, Henry C.; Igwe, Isaac O.; Madufor, Innocent C. |
|
2719 |
| Effect of zeolite modification via cationic exchange method on mechanical, thermal, and morphological properties of ethylene vinyl acetate/zeolite composites. |
Zaharri, N.D.; Othman, N.; Ishak, Z.A. |
|
4837 |
| Effective thermal conductivity of open cell polyurethane foam based on the fractal theory. |
Ankang, Kan; Houde, Han |
|
3992 |
| Effects of aging treatment on laser-welded mg-rare earth alloy NZ30K. |
Dai, Jun; Yang, Li; Li, Lili; Guo, Guolin; Guo, Lanzhong |
|
2314 |
| Effects of clay and moisture content on direct shear tests for clay-sand mixtures. |
Dafalla, Muawia A. |
|
3472 |
| Effects of deep cryogenic treatment on wear mechanisms and microthermal expansion for the material of drive elements. |
Chang, Yuh-Ping; Wang, Gino; Horng, Jeng-Haur; Chu, Li-Ming; Hwang, Yih-Chyun |
|
2154 |
| Effects of excess Cu addition on photochromic properties of AgCl-urethane resin composite films. |
Miyazaki, Hidetoshi; Shimoguchi, Hirochi; Nakayama, Hiroki; Suzuki, Hisao; Ota, Toshitaka |
|
2549 |
| Effects of fiber orientation and material isotropy on the analytical elastic solution of a stiffened orthotropic panel subjected to a combined loading. |
Nath, S.K. Deb |
|
4911 |
| Effects of nitride on the tribological properties of the low carbon alloy steel. |
Chang, Yuh-Ping; Wang, Jin-Chi; Horng, Jeng-Haur; Chu, Li-Ming; Hwang, Yih-Chyun |
|
2316 |
| Effects of the boron-doped [p.sup.+] emitter on the efficiency of the n-type silicon solar cell. |
Kim, Eun-Young; Kim, Jeong |
|
2509 |
| Efficacy of thermally conditioned sisal FRP composite on the shear characteristics of reinforced concrete beams. |
Sen, Tara; Reddy, H.N. Jagannatha |
|
7387 |
| Electric and magnetic properties of sputter deposited BiFe[O.sub.3] films. |
Siadou, N.; Panagiotopoulos, I.; Kourkoumelis, N.; Bakas, T.; Brintakis, K.; Lappas, A. |
|
3124 |
| Electrocaloric response of ferroelectric material applicable as electrothermal transducer. |
Mohammadi, Saber; Khodayari, Akram; Ahmadi, Arash |
|
3161 |
| Electromechanical characterization and locomotion control of IPMC BioMicroRobot. |
Otis, Martin J.-D. |
|
9003 |
| Electrospun polymer-fiber solar cell. |
Nagata, Shinobu; Atkinson, Gary M.; Pestov, Dmitry; Tepper, Gary C.; Mcleskey, James T., Jr. |
|
3154 |
| Electrostrictive energy conversion of polyurethane with different hard segment aggregations. |
Sukwisute, Pisan; Koyvanitch, Krit; Putson, Chatchai; Muensit, Nantakan |
|
4610 |
| Empirical modelling of nonmonotonous behaviour of shear viscosity. |
David, J.; Filip, P.; Kharlamov, A.A. |
|
2216 |
| Employing the [L.sub.CR] waves to measure longitudinal residual stresses in different depths of a stainless steel welded plate. |
Javadi, Yashar; Hloch, Sergej |
|
4050 |
| Enhancing microstructure and mechanical properties of AZ31-MWCNT nanocomposites through mechanical alloying. |
Jayakumar, J.; Raghunath, B.K.; Rao, T.H. |
|
3254 |
| Estimation of curvature changes for steel-concrete composite bridge using fiber Bragg grating sensors. |
Kang, Donghoon; Chung, Wonseok |
|
3603 |
| Evaluation of normal and nanolayer composite thermal barrier coatings in fused vanadate-sulfate salts at 1000[degrees]C. |
Daroonparvar, Mohammadreza; Yajid, Muhamad Azizi Mat; Yusof, Noordin Mohd.; Bakhsheshi-Rad, Hamid Re |
|
6622 |
| Evaluation of PE films having NIR-reflective additives for greenhouse applications in arid regions. |
Gulrez, Syed K.H.; Abdel-Ghany, Ahmed M.; Helal, Ibrahim M. Al-; Zaharani, Saeed M.; Al-Alsadon, Abd |
|
4802 |
| Evaluation of ultrasonic nonlinear characteristics in heat-treated aluminum alloy (Al-Mg-Si-Cu). |
Kim, Jong Beom; Jhang, Kyung-Young |
|
2484 |
| Experimental and theoretical investigations of the impact localization of a passive smart composite plate fabricated using piezoelectric materials. |
Dezfouli, M.M.S.; Hassan, Roshdi; Ruslan, Hafidz; Mat, Sohif; Bakhtyar, B. |
|
7372 |
| Experimental study of correlation of mechanical properties of Al-Si casts produced by pressure die casting with Si/Fe/Mn content and their mutual mass relations. |
Fedak, Marcel; Rimar, Miroslav; Corny, Ivan; Kuna, Stefan |
|
4232 |
| Experimental study on formation characteristics and laws of dislocation and stacking fault during cutting of titanium alloy. |
Yang, Y.; Llu, B. |
|
3559 |
| Facile postsynthesis of N-doped Ti[O.sub.2]-SBA-15 and its photocatalytic activity. |
Thi, Thu Phuong Tran; Nguyen, Duc Trieu; Duong, Tuan Quang; Luc, Huy Hoang; Vo, Vien |
|
4737 |
| Fiber optic vibration sensor based on the tilted fiber Bragg grating. |
An, Jiali; Liu, Tao; Jin, Yongxing |
|
1960 |
| Fibre laser cutting and chemical etching of AZ31 for manufacturing biodegradable stents. |
Demir, Ali Gokhan; Previtali, Barbara; Biffi, Carlo Alberto |
|
6399 |
| Flexural vibration test of a beam elastically restrained at one end: a new approach for young's modulus determination. |
Digilov, Rafael M.; Abramovich, Haim |
|
3566 |
| Fluorescent thiol-derivatized gold clusters embedded in polymers. |
Carotenuto, G.; De Nicola, S.; Nicolais, L. |
|
3129 |
| Forecasting of corrosion properties of steel wires for production of guide wires for cardiological treatment. |
Przondziono, J.; Walke, W.; Hadasik, E.; Mlynarski, R. |
|
3262 |
| Fracture energy estimation of DCB specimens made of glass/epoxy: an experimental study. |
Franklin, V. Alfred; Christopher, T. |
|
4860 |
| Geometry optimization calculations for the elasticity of gold at high pressure. |
Guler, E.; Guler, M. |
|
2837 |
| Gravity effects of curing angle on laminated composite structures: a review on novel study. |
Jennise, T.T.T.; Yuhazri, M.Y.; Sihombing, Haeryip; Yahaya, S.H.; Nirmal, Umar; Ahmad, M.M.H. Megat |
|
6315 |
| High pressure elastic behavior of synthetic [Mg.sub.3][Y.sub.2][(Si[O.sub.4]).sub.3] garnet up to 9 GPa. |
Fan, Dawei; Ma, Maining; Wei, Shuyi; Chen, Zhiqiang; Xie, Hongsen |
|
4539 |
| High temperature deformation behavior of 8090 Al-Li alloy. |
Jung, Woo Young; Ha, Tae Kwon |
|
5401 |
| Hydrothermal synthesis of Co-Ru alloy particle catalysts for hydrogen generation from sodium borohydride. |
Kurtinaitiene, Marija; Cieliene, Albina; Tamasauskaite-Tamasiunaite, Loreta; Selskis, Algis; Jagmina |
|
3772 |
| Hydrothermal synthesis of Pt-, Fe-, and Zn-doped Sn[O.sub.2] nanospheres and carbon monoxide sensing properties. |
Chen, Weigen; Zhou, Qu; Peng, Shudi |
|
5166 |
| Impact behavior of recycled aggregate concrete based on split Hopkinson pressure bar tests. |
Lu, Yubin; Chen, Xing; Teng, Xiao; Zhang, Shu |
|
3009 |
| Impact of brake pad structure on temperature and stress fields of brake disc. |
Wang, Guoshun; Fu, Rong |
|
4616 |
| Impact toughness and ductility enhancement of biodegradable poly(lactic acid)/poly([epsilon]-caprolactone) blends via addition of glycidyl methacrylate. |
Chee, Wei Kit; Ibrahim, Nor Azowa; Zainuddin, Norhazlin; Rahman, Mohd Faizal Abd; Chieng, Buong Woei |
|
4432 |
| Improved surface wettability of water by applying SiC/Ti6Al4V coatings on carbon/carbon composites. |
Zhang, Lei-Lei; Li, He-Jun; Li, Ke-Zhi; Zhang, Yu-Lei; Lu, Jin-Hua; Cao, Sheng; Zhao, Xue-Ni; He, Zi |
|
2042 |
| Improvement of dispersion and color effect of organic pigments in polymeric films via microencapsulation by the miniemulsion technique. |
Qi, Dongming; Chen, Zhijie; Yang, Lei; Cao, Zhihai; Wu, Minghua |
|
3105 |
| Improving barrier properties of PET by depositing a layer of DLC films on surface. |
Zhang, Zhiguo; Song, Riheng; Li, Guoneng; Hu, Guilin; Sun, Yaoyu |
|
3892 |
| Incorporation of functionalized multiwall carbon nanotubes into a polyurethane matrix. |
Michalek, Martin; Bredol, Michael |
|
3803 |
| Influence of [Eu.sup.3+]-doped on phase transition kinetics of pseudoboehmite. |
Zhu, Fuliang; Meng, Yanshuang |
|
4048 |
| Influence of annealing temperature on the magnetic properties of rapidly quenched [(Nd,Pr).sub.2]-[(Fe,Co,Ga,Ti,C).sub.14]B/[alpha]-Fe nanocomposite ribbons. |
Sabbaghizadeh, Rahim; Hashim, Mansor; Gholamipour, Reza; Bahmanrokh, Ghazaleh; Shafie, Shamsul Ezzad |
|
2204 |
| Influence of sulfurization temperature on photoelectric properties [Cu.sub.2]Sn[S.sub.3] thin films deposited by magnetron sputtering. |
Zhao, Pengyi; Cheng, Shuying |
|
2229 |
| Influence of surface treatment on strength distribution of vita VMK 68 dental porcelains. |
Nohut, Serkan; Tasdemir, Ahmet; Korkmaz, Suleyman Aykut |
|
4815 |
| Influences of holes arrangement on creep characteristic of nickel-base single crystal alloy blade cooling holes. |
Li, Lei; Ao, Liangbo; Xie, Gongnan; Wang, Xinmei; Cao, Gang |
|
1798 |
| Inhibition of cracks on the surface of cement mortar using Estabragh fibers. |
Soleimani, Tahereh; Merati, Ali Akbar; Latifi, Masoud; Ramezanianpor, Ali Akbar |
|
3260 |
| Inhibitive action of ferrous gluconate on aluminum alloy in saline environment. |
Popoola, Patricia Abimbola Idowu; Omotayo, Sanni; Loto, Cleophas A.; Popoola, Olawale Muhammed |
|
4495 |
| Integrating the TRIZ and Taguchi's method in the optimization of processes parameters for SMT. |
Jou, Yung-Tsan; Lin, Wen-Tsann; Lee, Wei-Cheng; Yeh, Tsu-Ming |
|
5621 |
| Intelligent detector of internal combustion engine cylinder pressure and sensitivity temperature coefficient compensation. |
Zheng, Beirong; Zhou, Chen; Pan, Xiaomin; Wang, Quan; Xue, Wei |
|
3519 |
| Interfacial reaction of Sn-Ag-Cu lead-free solder alloy on Cu: a review. |
Lee, Liu Mei; Mohamad, Ahmad Azmin |
|
7339 |
| Interpenetrating polymer network hydrogels based on gelatin and PVA by biocompatible approaches: synthesis and characterization. |
Hago, Eltjani-Eltahir; Li, Xinsong |
|
5956 |
| Investigating the influence of process parameters of ZNC EDM on machinability of A6061/10% SiC composite. |
Singh, Balbir; Kumar, Jatinder; Kumar, Sudhir |
|
3646 |
| Investigation of [B.sub.x] and [B.sub.y] components of the magnetic flux leakage in ferromagnetic laminated sample. |
Goktepe, Mustafa |
Clinical report |
4659 |
| Investigation of rock failure pattern in creep by digital speckle correlation method. |
Tan, Yunliang; Yin, Yanchun; Zhao, Tongbin |
|
4178 |
| Investigations of physical and rheological properties of aged rubberised bitumen. |
Ali, Asim Hassan; Mashaan, Nuha S.; Karim, Mohamed Rehan |
|
3627 |
| Manufacture of green-composite sandwich structures with basalt fiber and bioepoxy resin. |
Torres, J.P.; Hoto, R.; Andres, J.; Garcia-Manrique, J.A. |
|
3381 |
| Materials selection, synthesis, and dielectrical properties of PVC nanocomposites. |
Mobarak, Youssef; Bassyouni, M.; Almutawa, M. |
|
3463 |
| Measurements of the characteristics of transparent material using digital holography. |
Yu, Ding; Wenbin, Shang; Hong, Yang; Yan, Yang |
|
3315 |
| Mechanical behavior of steel fiber reinforced concrete investigated by one-stage light gas gun experiment. |
Jiang, Guoping; Wu, Xinhong |
|
2223 |
| Mechanical characterization of cryomilled al powder consolidated by high-frequency induction heat sintering. |
Danaf, Ehab A. El-; Soliman, Mahmoud S.; Almajid, Abdulhakim A.; Khalil, Khalil Abdelrazek |
|
5211 |
| Mechanical performance evaluation of concrete beams strengthened with carbon fiber materials. |
Ding, Jun; Huang, Xia; Zhu, Gang; Chen, Song; Wang, Guochao |
|
5172 |
| Mechanical properties and morphological characterization of PLA/chitosan/epoxidized natural rubber composites. |
Zakaria, Zainoha; Islam, Saiful; Hassan, Azman; Haafiz, M.K. Mohamad; Arjmandi, Reza; Inuwa, I.M.; H |
|
4406 |
| Mechanical properties of palm fibre reinforced recycled HDPE. |
Aldousiri, B.; Alajmi, M.; Shalwan, A. |
|
3161 |
| Microstructural characteristics and mechanical properties of friction stir spot welded 2A12-T4 aluminum alloy. |
Liu, Huijie; Zhao, Yunqiang; Su, Xingye; Yu, Lilong; Hou, Juncai |
|
3695 |
| Microstructural study of neodmium nickelate doped with strontium synthesized by gelatin method. |
Oliveira, R.M.P.B.; Pimentel, P.M.; Araujo, J.H.; Melo, D.M.A.; Melo, M.A.F.; Martinelli, A.E. |
|
2976 |
| Microtomographic analysis of impact damage in FRP composite laminates: a comparative study. |
Alemi-Ardakani, M.; Milani, A.S.; Yannacopoulos, S.; Bichler, L.; Trudel-Boucher, D.; Shokouhi, G.; |
Report |
3901 |
| Modelling of ballistic impact over a ceramic-metal protection system. |
Neckel, Leandro; Hotza, Dachamir; Stainer, Daniel; Janssen, Rolf; Qureshi, Hazim Ali Al- |
|
4304 |
| Modelling of hybrid materials and interface defects through homogenization approach for the prediction of effective thermal conductivity of FRP composites using finite element method. |
Mahesh, C.; Govindarajulu, K.; Murthy, V. Balakrishna |
|
3105 |
| Modelling the influence of manufacturing process variables on dimensional changes of porcelain tiles. |
Santos-Barbosa, Dolly; Hotza, Dachamir; Boix, Juan; Mallol, Gustavo |
|
8330 |
| Morphology and in vitro behavior of electrospun fibrous poly(D,L-lactic acid) for biomedical applications. |
Inami, Toshihiro; Tanimoto, Yasuhiro; Ueda, Masayuki; Shibata, Yo; Hirayama, Satoshi; Yamaguchi, Mas |
|
2625 |
| Multifunction of Ni/Ag nanocompound fluid. |
Kao, Mu-Jung |
|
1765 |
| Nanofibre electrospinning poly(vinyl alcohol) and cellulose composite mats obtained by use of a cylindrical electrode. |
Sutka, Anna; Kukle, Silvija; Gravitis, Janis; Milasius, Rimvydas; Malasauskiene, Jolanta |
|
2815 |
| Nanosericite as an innovative microparticle in dual-chemical paper retention systems. |
Perng, Yuan-Shing; Wang, Eugene I-Chen; Chang, Chih-Kai; Chang, Chih-Ping |
|
4634 |
| Neuro-fuzzy model for the prediction and classification of the fused zone levels of imperfections in Ti6Al4V alloy butt weld. |
Casalino, Giuseppe; Campanelli, Sabina Luisa; Minutolo, Fabrizio Memola Capece |
|
4555 |
| Nonlinear-electronic transport in [Fe.sub.2][O.sub.3] thin-films grown from grain-oriented iron foils. |
Arroyo, Roberto Baca |
|
3741 |
| Nonlocal nonlinear optical response of ionic liquids under violet excitation. |
Santos, Cassio E.A.; Alencar, Marcio A.R.C.; Migowski, Pedro; Dupont, Jairton; Hickmann, Jandir M. |
|
4049 |
| Novel optical fiber dynamic light scattering measurement system for nanometer particle size. |
Chen, Zhemin; Hu, Pengbing; Meng, Qingqiang; Dong, Xinyong |
|
1951 |
| Numerical tools for composite woven fabric preforming. |
Cherouat, Abel; Bourouchaki, Houman |
|
9004 |
| On the inertia term of projectile's penetration resistance. |
Shan, Yu; Wu, Haijun; Huang, Fenglei; Li, Jinzhu |
|
4159 |
| Optical and structural properties of titanium dioxide films from Ti[O.sub.2] and [Ti.sub.3][O.sub.5] starting materials annealed at various temperatures. |
Shei, Shih-Chang |
|
3946 |
| Optimization of Ni-based WC/Co/Cr composite coatings produced by multilayer laser cladding. |
Angelastro, Andrea; Campanelli, Sabina L.; Casalino, Giuseppe; Ludovico, Antonio D. |
|
3893 |
| Optimizing the mixing proportion with neural networks based on genetic algorithms for recycled aggregate concrete. |
Kim, Sangyong; Choi, Hee-Bok; Shin, Yoonseok; Kim, Gwang-Hee; Seo, Deok-Seok |
|
5353 |
| Parameters controlling the oxide reduction during sintering of chromium prealloyed steel. |
Hrubovcakova, Monika; Dudrova, Eva; Hryha, Eduard; Kabatova, Margita; Harvanova, Jarmila |
|
8953 |
| Parametric study of high-efficiency and low-emission gas burners. |
Hou, Shuhn-Shyurng; Chou, Ching-Hung |
Report |
2845 |
| Performance analysis of [Al.sub.2][O.sub.3]/water nanofluid with cationic chitosan dispersant. |
Chen, T.Y.; Cho, H.P.; Jwo, C.S.; Jeng, L.Y. |
|
3549 |
| Performance evaluation of crumb rubber modified stone mastic asphalt pavement in Malaysia. |
Mashaan, Nuha Salim; Ali, Asim H.; Koting, Suhana; Karim, Mohamed Rehan |
|
4541 |
| Performance of hybrid steel fibers reinforced concrete subjected to air blast loading. |
Yusof, Mohammed Alias; Nor, Norazman Mohamad; Ismail, Ariffin; Peng, Ng Choy; Sohaimi, Risby Mohd; Y |
|
3234 |
| Photoconductive multiplexing by ZnO:Zr:F thin solid films. |
Torres-Torres, C.; Castaneda, L.; Torres-Martinez, R. |
|
3666 |
| Physical properties and selective CO oxidation of coprecipitated CuO/Ce[O.sub.2] catalysts depending on the CuO in the samples. |
Wongkaew, Akkarat; Kongsi, Wichai; Limsuwan, Pichet |
|
5257 |
| Physicochemical and microstructural characterization of injectable load-bearing calcium phosphate scaffold. |
Alshaaer, Mazen; Kailani, Mohammed H.; Jafar, Hanan; Ababneh, Nidaa; Awidi, Abdalla |
|
5423 |
| Polymer catalysts imprinted with metal ions as biomimics of metalloenzymes. |
Czulak, Joanna; Jakubiak-Marcinkowska, Anna; Trochimczuk, Andrzej |
|
5272 |
| Pool boiling of micro-/nanoparticles modified aluminum surface. |
Yang, Chin-Ting; Yu, Chia-Cheng |
|
2843 |
| Prediction of splitting tensile strength from cylinder compressive strength of concrete by support vector machine. |
Yan, Kezhen; Xu, Hongbing; Shen, Guanghui; Liu, Pei |
|
9919 |
| Preparation and characterization of reduced graphene oxide sheets via water-based exfoliation and reduction methods. |
Loryuenyong, Vorrada; Totepvimarn, Krit; Eimburanapravat, Passakorn; Boonchompoo, Wanchai; Buasri, A |
|
2615 |
| Preparation of CeP[O.sub.4] modified Zr[O.sub.2] ceramics with different particle sizes and their mechanical behaviors. |
Yan, Wei; Jing, Li; Wei, Zi; Bing, Han; Liang, Xu-Deng |
|
2357 |
| Preparation of modified kaolin filler with cesium and its application in security paper. |
Saied, Houssni El-; Sherbiny, Samya El-; Ali, Omnia; Saied, Wafaa El-; Rohyem, Said |
|
4585 |
| Preparation of organic-inorganic hybrid materials based on MCM-41 and its applications. |
Alahmadi, Sana M.; Mohamad, Sharifah; Maah, Jamil |
|
5590 |
| Pressure dependence of the electrical resistivity in polymer polyaniline. |
Huang, Daihui; Xie, Dong; Gao, Jingjing; Lv, Wangchun; Hong, Shiming |
|
2930 |
| Pretreatment of woven jute FRP composite and its use in strengthening of reinforced concrete beams in flexure. |
Sen, Tara; Reddy, H.N. Jagannatha |
|
9743 |
| Processing and validation of whey-protein-coated films and laminates at semi-industrial scale as novel recyclable food packaging materials with excellent barrier properties. |
Bugnicourt, E.; Schmid, M.; Mc. Nerney, O.; Wildner, J.; Smykala, L.; Lazzeri, A.; Cinelli, P. |
|
6253 |
| Properties and analysis of transparency conducting AZO films by using DC power and RF power simultaneous magnetron sputtering. |
Shih, Neng-Fu; Chen, Jin-Zhou; Jiang, Yeu-Long |
|
3769 |
| Properties of raphia palm interspersed fibre filled high density polyethylene. |
Obasi, Henry C. |
|
2614 |
| Redistribution and effect of various elements on the morphology of primary graphite in cast iron. |
Lacaze, J.; Valle, N.; Theuwissen, K.; Sertucha, J.; Adib, B. El; Laffont, L. |
|
4871 |
| Reduction of maximum and residual drifts on posttensioned steel frames with semirigid connections. |
Lopez-Barraza, Arturo; Bojorquez, Eden; Ruiz, Sonia E.; Reyes-Salazar, Alfredo |
|
5372 |
| Reinforcement of recycled foamed asphalt using short polypropylene fibers. |
Kim, Yongjoo; Park, Tae-Soon |
|
5092 |
| Relative humidity sensor based on microfiber loop resonator. |
Zheng, Yangzi; Dong, Xinyong; Zhao, Chunliu; Li, Yi; Shao, Liyang; Jin, Shangzhong |
|
1522 |
| Research on the static recrystallization and precipitation behaviors of a V-N microalloyed steel. |
Zhao, Baochun; Zhao, Tan; Li, Guiyan; Lu, Qiang |
|
3211 |
| Resistance switching characteristics in ZnO-based nonvolatile memory devices. |
Chiu, Fu-Chien |
|
2746 |
| Review on techniques for on-line monitoring of resistance spot welding process. |
Ma, Yanhua; Wu, Pei; Xuan, Chuanzhong; Zhang, Yongan; Su, He |
|
3857 |
| Scaling analysis of the tensile strength of bamboo fibers using Weibull statistics. |
Shao, Jiaxing; Wang, Fang; Li, Lu; Zhang, Junqian |
|
3270 |
| Seismic response analysis of masonry minaret and possible strengthening by fiber reinforced cementitious matrix (FRCM) materials. |
Turk, Ahmet Murat |
|
5971 |
| Sensing characteristics of side-hole fiber-based long-period grating. |
Xin, Yi; Dong, Xinyong; Yuan, Junwei; Li, Yi; Jin, Shangzhong; Zhang, Sulei |
|
2848 |
| Sensitivity analysis of the artificial neural network outputs in friction stir lap joining of aluminum to brass. |
Shojaeefard, Mohammad Hasan; Akbari, Mostafa; Tahani, Mojtaba; Farhani, Foad |
|
3964 |
| Size effects on magnetic properties of [Ni.sub.05][Zn.sub.0.5][Fe.sub.2][O.sub.4] prepared by sol-gel method. |
Zhang, Min; Zi, Zhenfa; Liu, Qiangchun; Zhang, Peng; Tang, Xianwu; Yang, Jie; Zhu, Xuebin; Sun, Yupi |
|
4938 |
| Sm[Ba.sub.2]Nb[O.sub.6] nanopowders, an effective percolation network medium for YBCO superconductors. |
Vidya, S.; Mathai, K.C.; Rejith, P.P.; Solomon, Sam; Thomas, J.K. |
|
3749 |
| Stay-in-place formwork of TRC designed as shear reinforcement for concrete beams. |
Verbruggen, S.; Remy, O.; Wastiels, J.; Tysmans, T. |
|
5186 |
| Stress-softening and residual strain effects in suture materials. |
Elias-Zuniga, Alex; Montoya, Beatriz; Ortega-Lara, Wendy; Flores-Villalba, Eduardo; Rodriguez, Ciro |
|
5123 |
| Structural and morphological characterization of micro and nanofibers produced by electrospinning and solution blow spinning: a comparative study. |
Oliveira, Juliano E.; Mattoso, Luiz H.C.; Orts, William J.; Medeiros, Eliton S. |
|
7666 |
| Structural and optical properties of chemical bath deposited silver oxide thin films: role of deposition time. |
Nwanya, A.C.; Ugwuoke, P.E.; Ezekoye, B.A.; Osuji, R.U.; Ezema, F.I. |
|
3596 |
| Studies in finishing effects of clay mineral in polymers and synthetic fibers. |
Uddin, Faheem |
|
9223 |
| Studies on the potential of waste soda lime silica glass in glass ionomer cement production. |
Thoo, V.W. Francis; Zainuddin, N.; Matori, K.A.; Abdullah, S.A. |
|
3373 |
| Study of alloying process on 40Cr surface with electron beam after electroplated Cr layer. |
Hongbin, Xu; Jianjun, Hu; Hui, Li; Rongshan, Mao; Fei, Sun; Tianfeng, Hou |
|
3048 |
| Study on microchannel design and burst frequency detection for centrifugal microfluidic system. |
Chang, Yaw-Jen; Chen, Shia-Chung; Hsu, Cheng-Li |
Report |
3826 |
| Study on tensile properties of nanoreinforced epoxy polymer: macroscopic experiments and nanoscale FEM simulation prediction. |
Wang, Zhenqing; Liu, Fang; Liang, Wenyan; Zhou, Limin |
|
3657 |
| Study on thixojoining process using partial remelting method. |
Mohammed, M.N.; Omar, M.Z.; Salleh, M.S.; Alhawari, K.S. |
|
2806 |
| Surface state capture cross-section at the interface between silicon and hafnium oxide. |
Chiu, Fu-Chien |
|
4068 |
| Susceptibility to stress corrosion of laser-welded composite arch wire in acid artificial saliva. |
Zhang, Chao; Sun, Xinhua |
|
4213 |
| Sustainable use of tepetate composite in earthen structure. |
Lopez-Lara, T.; Hernandez-Zaragoza, Juan Bosco; Horta, Jaime; Gonzalez, Eduardo Rojas; Lopez-Cajun, |
|
4669 |
| Synchrotron-radiation X-ray investigation of [Li.sup.+]/[Na.sup.+] intercalation into Prussian blue analogues. |
Moritomo, Yutaka; Takachi, Masamitsu; Kurihara, Yutaro; Matsuda, Tomoyuki |
|
8429 |
| Synergistic flame retardancy of aluminium dipropylphosphinate and melamine in polyamide 6. |
Tang, Linsheng; Yuan, Zhigang; Xu, Lu; Li, Xue; Ge, Yuzhen |
|
3901 |
| Terahertz wave approach and application on FRP composites. |
Im, Kwang-Hee; Hsu, David K.; Chiou, Chien-Ping; Barnard, Daniel J.; Jung, Jong-An; Yang, In-Young |
|
4405 |
| Testing of the structure and mechanical properties of technical titanium joints. |
Wronka, Bogumil |
|
3981 |
| The behavior of masonry walls with reinforced plaster mortar. |
Basaran, Hakan; Demir, Ali; Bagci, Muhiddin |
|
4415 |
| The creep parameters of SAC305 unleaded solders. |
Hsu, Chao-Ming; Lin, Ah-Der; Kuang, Jao-Hwa |
|
4306 |
| The effect of annealing on the structural and optical properties of titanium dioxide films deposited by electron beam assisted PVD. |
Abdulraheem, Yaser M.; Ghoraishi, Sahar; Arockia-Thai, Lidia; Zachariah, Suji K.; Ghannam, Moustafa |
|
5876 |
| The effect of cooling rate on microstructure and mechanical properties of Zr-based bulk metallic glasses. |
Fu, Weihong; Sun, Yajuan; Zhang, Wei |
|
2976 |
| The effect of deposition rate on morphology and structural properties of carbon-nickel composite films. |
Elahi, Smohammad; Dalouji, Vali; Valedbagi, Shahoo |
|
1915 |
| The effect of external magnetic field on microstructure and magnetic properties of melt-spun Nd-Fe-B/Fe-Co nanocomposite ribbons. |
Nguyen, Xuan Truong; Vu, Hong Ky; Do, Hung Manh; Nguyen, Van Khanh; Nguyen, Van Vuong |
|
3331 |
| The effect of negative Poisson's ratio polyurethane scaffolds for articular cartilage tissue engineering applications. |
Park, Yeong Jun; Kim, Jeong Koo |
|
2468 |
| The effect of operational cutting parameters on Nitinol-60 in wire electrodischarge machining. |
LotfiNeyestanak, Ali Akbar; Daneshmand, Saeed |
|
3238 |
| The effects of process parameters on evolutions of thermodynamics and microstructures for composite extrusion of magnesium alloy. |
Hu, H.-J. |
|
4602 |
| The influence of emulsifier on rheological and sensory properties of cosmetic lotions. |
Moravkova, Tereza; Filip, Petr |
|
3867 |
| The kinetics and dry-sliding wear properties of boronized gray cast iron. |
Mu, Dong; Shen, Bao-luo |
|
2890 |
| The production of nickel-chromium-molybdenum alloy with open pore structure as an implant and the investigation of its biocompatibility in vivo. |
Er, Yusuf; Unsaldi, Emine |
|
3152 |
| The spot weldability of carbon steel sheet. |
Mukhtar, A.M. Al-; Doos, Q. |
|
3201 |
| The variation of optical band gap for ZnO:In films prepared by sol-gel technique. |
Tang, Guomei; Liu, Hua; Zhang, Wei |
|
2030 |
| Thermal and cure kinetics of epoxy molding compounds cured with thermal latency accelerators. |
Su, Chean-Cheng; Wei, Chien-Huan; Li, Bo-Ching |
|
5141 |
| Thermo elastic-plastic analysis of rotating functionally graded stainless steel composite cylinder under internal and external pressure using finite difference method. |
Sharma, Sanjeev; Yadav, Sanehlata |
|
7650 |
| Towards better understanding of concrete containing recycled concrete aggregate. |
Qasrawi, Hisham; Marie, Iqbal |
|
5112 |
| Uniformly distributed graphene domain grows on standing copper via low-pressure chemical vapor deposition. |
Chan, Shih-Hao; Chen, Sheng-Hui; Lin, Wei-Ting; Kuo, Chien-Cheng |
|
2212 |
| Upgrading of resolution elastic neutron scattering (RENS). |
Magazu, S.; Migliardo, F.; Caccamo, M.T. |
|
4367 |
| Upset prediction in friction welding using radial basis function neural network. |
Liu, Wei; Wang, Feifan; Yang, Xiawei; Li, Wenya |
|
4914 |
| Vibration analysis of cylindrical sandwich aluminum shell with viscoelastic damping treatment. |
Cheng, Tai-Hong; Li, Zhen-Zhe; Shen, Yun-De |
|
2764 |
| Wear behaviour of eutectic Al-Si alloy-graphite composites fabricated by combined modified two-stage stir casting and squeeze casting methods. |
Shanmughasundaram, P.; Subramanian, R. |
|
3845 |
| White-ceramic conversion on Ti-29Nb-13Ta-4.6Zr surface for dental applications. |
Obata, Akiko; Miura-Fujiwara, Eri; Shimizu, Akimitsu; Maeda, Hirotaka; Nakai, Masaaki; Watanabe, Yos |
|
4068 |
| Wood versus plant fibers: similarities and differences in composite applications. |
Madsen, Bo; Gamstedt, E. Kristofer |
|
9524 |
