AMCC Expands Dual CDR Portfolio for 10Gbps XFP Module Applications; AMCC's S19256 10Gbps Dual Clock Data Recovery Device Offers Adapted Feature Set for Lower Power Dissipation in Cost Sensitive Short and Intermediate Reach XFP Applications.
The S19256 features a small footprint 6x6 mm2, compatible with the 19233 and targets short reach (2 km) and intermediate reach (40 km) applications for 10Gbps data transmission for multiple standards including 10G Ethernet, SONET/SDH, or Fibre Channel. The S19256 device is equipped with a built-in equalizer to mitigate data-dependent jitter generated during the transmission of signals in FR-4 material. Customers benefit from this ability to compensate for any deterministic jitter by realizing overall improved system jitter performance. In addition to superior performance, the S19256 provides very high cross talk isolation and can be seamlessly connected on the motherboard to AMCC's 10G Serdes devices including the S19235 or S19237. AMCC's dual CDR portfolio offers designers a single pin-compatible family with optimized feature sets that target different reach and price points for various XFP applications. The S19256 is one-third less expensive than the EDC-based long-reach S19233 offering.
"Customers are pleased to see this broadening in AMCC's PHY product offerings to meet the growing need for a lower-power, low cost 10Gigabit Ethernet optical module," said Sam Fuller, vice president of marketing at AMCC. "The 19233 and 19256 products from AMCC provide a common footprint for both the short-reach and long-reach markets. Most of our customers are offering products for both markets but face different market demands in performance and price. The common design platform of the S19256 and S19233, enables our customers to offer optimized solutions in both markets based on a common product family."
The optical receiver of the S19256 integrates an AGC amplifier with offset cancellation circuitry with the CDR function. The transmit electrical side of this device also has an equalization circuit and CDR that reshapes the data after up to 20" of transmission over copper on FR-4 PWB material, with low jitter generation of 25 mUI. The low-jitter CML interface is designed to be compliant with the bit error rate requirements of the Telcordia and ITU-T standards.
Packaged in a 6x6 mm2 49-pin PBGA, 0.8mm pitch, the S19256 is currently sampling, with volume production scheduled for the fourth quarter of 2006. The S19256 is available in both leaded and full RoHS compliant packages. For additional information on the S19256, visit www.amcc.com.
AMCC is a global leader in network and embedded PowerPC processing, optical transport and storage solutions. Our products enable the development of converged IP-based networks offering high-speed secure data, high-definition video and high-quality voice for carrier, metropolitan, access and enterprise applications. AMCC provides networking equipment vendors with industry-leading network and communications processing, Ethernet, SONET and switch fabric solutions. AMCC is also the leading vendor of high-port count SATA RAID controllers enabling low-cost, high-performance, high-capacity storage. AMCC's corporate headquarters are located in Sunnyvale, California. Sales and engineering offices are located throughout the world. For further information regarding AMCC, please visit our web site at http://www.amcc.com.
This press release contains "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements may be identified by words such as expects, anticipates, plans, believes, estimates, will or words of similar meaning. Such forward-looking statements, including statements relating to the products discussed in this press release, are subject to a number of risks and uncertainties, including the risk that the products may not be successfully or timely developed, completed or manufactured or achieve market acceptance, risks relating to general economic conditions, as well as the risks and uncertainties set forth in the Company's Annual Report on Form 10-K, and in the Company's other SEC filings. As a result of these risks and uncertainties, actual results may differ materially from these forward-looking statements. The forward-looking statements contained in this press release are made as of the date hereof and AMCC does not assume any obligation to update any forward-looking statement, whether as a result of new information, future developments or otherwise.
AMCC IS A REGISTERED TRADEMARK OF APPLIED MICRO CIRCUITS CORPORATION. THE POWERPC NAME AND LOGO ARE REGISTERED TRADEMARKS OF IBM CORPORATION AND USED UNDER LICENSE THEREFROM. ALL OTHER TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS.
|Printer friendly Cite/link Email Feedback|
|Date:||Jul 24, 2006|
|Previous Article:||Brion Invites Design Leaders to Lunch at DAC; Lunch Seminar Features Experts on Design for Manufacturing.|
|Next Article:||Vertis Communications Introduces Innovative Advertising Inserted Products; Newly Designed Formats Improve Consumer Visibility and Impact.|