Printer Friendly

A Complete, Small Form Factor PCB Is Now Here.

Audinate , creator of the Dante audio networking technology, has launched the Dante Analog Output Module , a complete, small form factor PCB that allows for rapid development of Dante-to-analog endpoints.

Manufacturers canuse this module in a variety of small footprint enclosures with appropriate analog connectors to rapidly bring finished products to market.

The Dante Analog Output Module supports one RJ45 Dante input, and one or two balanced analog outputs.The module can receive audio channels from a Dante network and provide studio-quality, low-latency audio via balanced output connectors to analog audio equipment. Any audio available on the Dante network can be routed via the outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analog audio device. Adapters (for example XLR-to-RCA and XLR-to-phono) can be used to connect to audio equipment without the required built-in connectors.

The Dante Analog Output Module features a digital-to-analog converter and supports a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network.

Other features include:

Compact form factor

Complete board for rapid product development

1 or 2 output channels

Supported sample rates of 44.1 kHz, 48 kHz (default), and 96 kHz

Power-over-Ethernet (POE)

[c] Copyright 2016 Streamline RBR, Inc. All Rights Reserved. Provided by SyndiGate Media Inc. ( ).

COPYRIGHT 2016 SyndiGate Media Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2016 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Publication:Radio and Television Business Report (RBR+TVBR)
Date:Nov 22, 2016
Previous Article:Here's A New Monthly SFX Service For Radio.
Next Article:Who Just Bought PacTV?

Terms of use | Privacy policy | Copyright © 2021 Farlex, Inc. | Feedback | For webmasters |