Printer Friendly

64-bit compatible CAD/CAM software.

Alphacam, Vero Software

Available from Vero Software, Alphacam 2015 R2 is a 64-bit compatible CAD/CAM software featuring a GUI and a new fully customizable radial menu so users can set up as few or as many commands as they need. Enhancements in 2015 R2 include wire frame machining for effective trimming and multi-axis roughing, which allows roughing to the actual contour, removing any unnecessary fresh-air machining. Side Wall Axial Relief Feed (SWARF) machining reduces 5-axis cycle times and gives a better surface finish through effective side-of-tool machining, the company says. The Enhanced Feature Extraction makes it easier to find features on orthogonal panel faces with the option of finding holes and contours on any panel face at the same time, speeding up panel processing. And Part Management features full associativity between a part and its copy; whenever an original part is amended on Alphacam 2015 R2, there is the option to automatically update the copy.

(800) 461-2015,

COPYRIGHT 2015 Vance Publishing Corp.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2015 Gale, Cengage Learning. All rights reserved.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:PRODUCTS
Publication:Woodworking Network
Date:Aug 1, 2015
Previous Article:Hydraulic Clamp Carrier with rotative frame.
Next Article:Applied Moulding Door Design.

Terms of use | Privacy policy | Copyright © 2022 Farlex, Inc. | Feedback | For webmasters |