4Gb/s: coming soon to a SAN near you.
Driven by the ever-increasing demand for storage from corporate applications, storage vendors are today preparing SAN infrastructure components that will double the speed of today's 2 Gb/s storage switches and the host bus adapters (HBAs). Customers who invest in 4 Gb/s components in 2005, even if they currently lack the demand to fully utilize this increased bandwidth, will be ideally situated to save through increased application performance, faster backups and recovery from hardware failures, and avoidance of future SAN infrastructure upgrades.
Whether because of e-commerce, regulatory requirements or everyday applications such as e-mail, enterprises need faster and faster access to more and more data every day. Throughout their IT infrastructures, the speed and data handling capacity of microprocessors, disk drives, data networks and databases are all continually increasing as well. To keep up, every part of the organization's storage infrastructure must grow in capacity as well.
The most commonly used storage protocol for medium and large companies is Fibre Channel, which is used to link servers to storage switches, storage switches to disk arrays, and disk arrays to each other within Storage Area Networks (SANs.) Most FC SANs currently run at 1 or 2 Gb/s, a data transfer speed which is adequate for many current storage needs. However, the upcoming 4 Gb/s products will address a number of current, or upcoming, storage challenges. They include:
The emergence of servers utilizing the new PCI Express bus. Compared to the current PCI-X bus, PCI Express will more than double the rate at which data can be transferred between server memory and peripherals such as HBAs. PCI Express is highly scalable, with speeds expected to increase from the initial 2.5Gb/s to as much as 80Gb/s, depending on the implementation. PCI Express offers other improvements such as enhanced data integrity, as well as improved error reporting and handling. Its adoption is expected to be sped by the fact that, like 4 Gb/s Fibre Channel, PCI Express will be software compatible with earlier generations of technology (the PCI-X and PCI buses.) Investing in the new generation of 4 Gb/s SAN components in 2005 ensures these PCI Express servers will not face a bandwidth bottleneck as they communicate with storage switches and SANs.
The need to reduce the time required to back up large application databases to tape. Tape continues to be the preferred medium for long-term, off-site archival storage of data. New regulations, along with the need for such archived data for disaster recovery, are constantly increasing the amount of data organizations must archive. Yet transferring such data from a FC SAN to tape often requires taking the source application off-line, which interrupts users' work and overall efficiency. By allowing data to be shipped from the SAN to the backup devices more quickly, upgrading to 4 Gb/s FC can shorten this "backup window" and provide regulatory compliance and disaster recovery without interrupting everyday business processes.
Growing needs for server consolidation. By virtualizing dozens or even hundreds of servers on each port on a FC switch, customers can make more efficient use of their server resources while reducing the number of storage switches they must buy and maintain. Each storage switch must, however, be able to handle the increased amount of data moving to and from the consolidated servers. Purchasing 4 Gb/s FC components now gives customers the flexibility to implement very large-scale server consolidation as their needs and advancements in virtualization technology dictate.
Scalability for demanding applications. Applications such as on-line transaction processing and those involving digital media (such as video on demand) have the potential to strain even today's most robust SAN infrastructures. For example, a transactional system generating 50,000 I/O (input/output) operations per second, with each operation involving only 4 Kbytes of data, can saturate a 2 Gb/s FC link. Purchasing 4 Gb/s SAN components can, at no additional cost beyond that of 2 Gb/s products, accommodate such I/O streams without slowing the applications on which they depend.
The need to reduce RAID rebuild times. Organizations deploy RAID (redundant array of independent disk) subsystems so that in the event one drive fails the data on it can be recreated from parity data stored on the other disks in the array. The speed with which the data can be recreated, of course, depends in part on the speed with which the parity data can be read from the other disks. Purchasing 4 Gb/s FC components assures customers that as the capacity of the drives within their RAID arrays increases, the time required to rebuild RAID drives (and thus to assure business continuity after a hardware failure) will remain within acceptable limits.
Building Blocks of 4Gb/s SANs
SANs are complex storage systems built upon infrastructure solutions from a variety of vendors. These component vendors must ship their products to OEMs well before their product release dates to allow for compatibility and other testing. Leading SAN infrastructure vendors are currently shipping 4 Gb/s products to leading storage OEMs who will begin shipping 4 G/bs FC SANs in mid-2005.
Emulex was first to market with a 4 Gb/s embedded storage switch, the InSpeed SOC 422. The InSpeed SOC 422 is an embedded storage switch, providing 22 ports of connectivity in a highly integrated device that is ideal for implementing a wide variety of embedded storage applications, including SBODs (Switched Bunch of Disks), Root Switches and Fully Switched Architectures. InSpeed embedded storage switching technology enhances the reliability, serviceability, and performance by bringing switched connectivity inside the storage system. The SOC 422 may operate at either 1, 2, or 4 Gb/s, and offers Automatic Trunking for automatic failover. The SOC 422 also provides advanced diagnostics, performance monitoring and fault isolation to ensure maximum system availability and serviceability.
Ideal for use with 2.5-inch Small Form Factor disk drives, the SOC 422 can transform traditional JBOD (Just a Bunch Of Disks) configurations into highly reliable SBODs arrays, to deliver a fully switched infrastructure. By providing a switched architecture within the RAID array, the InSpeed SOC 422 improves the performance, reliability and serviceability of the RAID array.
Emulex has also announced its Helios 4 Gb/s IOC (Input/Output Controller), which features integrated memory and the latest ARM processor for use in embedded applications requiring high performance, dual channel embedded target and/or initiator connectivity. Emulex's Helios IOC is the foundation for its new 4Gb/s LP11000 family of Fibre Channel HBAs. At the Fall 2004 Storage Networking World, Emulex was the first vendor to show a working 4 Gb/s HBA, the LP11000, which will ship in single and dual-channel versions for enterprise and midrange customers. Emulex also took part in the first-ever multi-vendor demonstration utilizing its 4 Gb/s SOC 422 embedded storage switches and LP11000 HBAs interoperating with both 2 Gb/s and 4 Gb/s components from other vendors.
Key Features in 4Gb/s SAN Components
Storage customers understand that pure speed and the latest features are worth little if these new technologies are too difficult to implement or are not backward-compatible with legacy products. That is why the backwards-compatibility of 4 Gb/s FC technology with earlier 2 and 1 Gb/s products is so vital, and why customers should also look for compatibility and investment protection from vendors in purchasing 4 Gb/s SAN components.
Like all other Emulex products, its 4 Gb/s product family is based on a firmware-based architecture that allows for the use of a single operating system driver across all generations of Emulex products. This unique architecture provides a seamless migration path from older to newer technologies, assures customers they can continue to use older Emulex products alongside newer products, and reduces management costs and the TCO (total cost of ownership) of enterprise storage systems.
Emulex's 4Gb/s switches and HBAs are supported by drivers for a wide range of operating systems including Windows, Solaris, Linux, HP-UX and Netware.
By the middle of 2005, OEMs will be shipping SAN components, which deliver 4 Gb/s connectivity--double the bandwidth of current high-end components--at little to no increased cost to the customer. Unlike earlier technology transitions, this move will be virtually painless because the new generation of SAN components will be fully compatible with, and interoperable with, earlier 1 and 2 Gb/s storage components.
Customers purchasing this new generation of SAN components in 2005 will be in position to take advantage of the full capabilities of the upcoming wave of PCI Express-based or PCI-X 2.0 based servers; to reduce their tape backup windows; and to exploit upcoming advances in server consolidation that will cut server management costs and reduce the purchase of additional storage switches. These customers will also be positioned to accommodate ever-growing data demands from enterprise applications such as transaction processing, while maintaining required service levels for application performance and disaster recovery.
SAN component vendors are working with OEMs to deliver the 4 Gb/s storage solutions that solve not only today's storage needs, but tomorrow's as well-with no cost (in money or in upgrade effort) to enterprise customers.
Lovest Watson is a product manager for Emulex Corporation (Costa Mesa, CA)
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||Storage Management; storage area networks|
|Publication:||Computer Technology Review|
|Date:||Dec 1, 2004|
|Previous Article:||ILM: the promises and the problems.|
|Next Article:||RAID[sup.n]: a revolutionary alternative to expensive, unreliable RAID.|