3D Printing Start-Up Competes with Injection Molding: A year-old company is devoted to large-scale custom 3D printing at prices competitive with injection molding to 20,000 parts.
There are growing signs that injection molders need to watch their backs. Innovative start-up companies are emerging with large "farms" of 3D printers organized to compete with injection molding for orders of 10,000, 20,000, or even 100,000 parts. We reported in a September 2017 Close-Up on one example of this new type of competition, Voodoo Manufacturing in Brooklyn, N.Y. That article brought a response from a similar new venture, clear across the country. We were contacted by Gabe Bentz, president and founder of Slant Concepts in Nampa, Idaho. His mechanical design and engineering firm had spun off a second venture in October 2016, called Slant 3D, devoted to custom 3D printing in small to medium volumes. He claims it can produce parts that are less expensive than injection molding in volumes under 10,000 parts and reasonably competitive in price at up to 20,000 parts (see accompanying chart).
"We are working to make 3D printing a large-scale manufacturing option," says Bentz. "We are doing this by developing hardware, software, and techniques to allow 3D-printing devices to produce parts in volume."
HOME-MADE PRINTERS WITH AUTOMATION
Slant 3D (slant3d.com) operates a production printer "farm" with close to 100 printers, a number expected to grow to 500 in the next year or two. Bentz claims capacity to produce 5000 to 10,000 parts a week.
His printers are self-manufactured to the firm's own design. They utilize an FDM-type of process in which extruded thermoplastic filaments are deposited in thin layers. Called the SlantBox, these "commoditized" printers are mounted in racks and all connected to the cloud for maximum productivity. They have a build volume of 10 x 8 x 9 in. and precision of 100 to 300 microns. They are designed to run continuously with much greater reliability than standard 3D printers. "We design them to be assembled and implemented quickly, but also rigid and tough enough to produce 95% good parts," Bentz says. By addressing typical 3D manufacturing defects stemming from bed inconsistency or nonuniform extrusion rates, Bentz claims his production is more consistent from part to part and throughout an individual part than is commonly found in the market.
What's more, he notes, his printers are fully automated so they can operate 24/7 without human intervention. "We have no need of robotic systems, because our printers remove the parts themselves (free dropped into bins) and are still lower cost to produce than most desktop 3D printer kits." Bentz expects to begin marketing the SlantBox to others in the near future, at an anticipated price of $1000 to $1500.
Slant 3D's primary material is PLA, though it also uses ABS and TPU to a lesser extent. Twelve colors are offered at present. His clients include robotics companies, architecture firms, and numerous companies looking for promotional items and prototypes in substantial volumes.
GOING AFTER INJECTION MOLDING
According to Bentz, price isn't the only reason to consider 3D printing. "Traditional manufacturing techniques," he says, "require high up-front expenses for tooling and long-term, high-volume production of a component to amortize those initial expenses. But if there is a mistake in the product, or the market changes, so that the product must be modified, companies may lose the entire investment in molds and tooling. This high risk also makes entry into high-volume production challenging for small or new businesses.
"3D printing allows an idea to go from conception to manufacture quickly and much more affordably. There are no tooling costs or lead time. A company wishing to produce a product need only design it and then pay for the raw materials used to produce it. 3D printing puts physical products on equal footing with software products in production costs. Printing allows products to be produced at very low cost and constantly updated with no large capital expenditures."
All that's necessary is to email Slant 3D a design file, and it can be put into production with little delay. However, Slant 3D also offers design services help get new products ready for production. Slant can do design consultation to judge printability and works with clients to tweak existing designs for optimum printability.
Bentz concedes that surface smoothness is one area in which injection molding has an advantage over most 3D printing. Because 3D printed parts are typically produced in a sequence of layers, they can be weaker in the Z-direction than injection molded parts. However, Slant 3D has produced some structural parts. The key, Bentz notes, is that such parts must be designed specifically for 3D printing, not simply converted from an injection molded design.
He adds that 3D printing has advantages for making so-called "impossible" parts. An example is the gear shafts shown in the photo above. They are built around a metal bearing, making the entire assembly effectively a single part. Injection molded parts for this assembly would have to be designed to interlock and pull apart so that a bearing could be inserted. In this case, what is now manufactured as a single assembly would have to be split into the gear, toothed pulley, shaft, and metal bearing, all of which would be manufactured separately and then assembled together.
But since this part was 3D printed, the gear, pulley, and shaft were combined into a single part. During production, the build would pause to insert the metal bearing. Then the build would continue and the part would be built around the bearing. 3D printing reduced four parts to two. Manufacturing cost was dramatically reduced because there was no assembly and none of the tooling that would have been required for the three plastic parts combined with the bearing. Slant 3D is using this approach to develop a "fidget spinner" with an internal bearing.
Bentz will give a talk on 3D printing at Plastics Technology's Molding 2018 Conference, Feb. 27-Mar. 1 in Long Beach, Calif. A representative of Voodoo Manufacturing will also speak there. Details and registration are at moldingconference.com.
By Matt Naitove Executive Editor
Caption: Injection Molding vs. 3D Printing Unit Cost
Comparison of injection molding and 3D printing costs. It is assumed that the injection mold costs $5000 and the cost per part, exclusive of mold-amortization, is 20[cents]. Total cost per molded part, including mold amortization declines with volume, while 3D-printed part cost is constant at an assumed 70[cents].
Caption: Gabe Bentz, president and founder of Slant 3D with some of his dozens of custom-designed and built 3D printers that can produce 5000 to 10,000 parts a week.
Caption: Slant 3D can produce anything from promotional items to small mechanical components at prices competitive with injection molding in volumes up to 20,000 parts.
Caption: 3D printing can make "impossible" parts like these gear shafts with a metal bearing inside. The gear, toothed pulley, and shaft are one plastic part that was built around the bearing instead of manufactured separately.
|Printer friendly Cite/link Email Feedback|
|Title Annotation:||3D PRINTING: Close-Up On Technology|
|Date:||Jan 1, 2018|
|Previous Article:||Winners of 2017 SPE Automotive Awards Wow with Many 'Firsts': Innovative, transferable, and intelligent use of thermoplastics capture eight of nine...|
|Next Article:||Switching Hydraulic Oil Saves Energy & Machine Downtime: Test at leading molder shows a high-viscosity, zinc-free oil improves pump efficiency and...|