Printer Friendly

'Collar joining' method makes plastic-metal hybrids. (Assembly).

* A mechanical method for joining plastic and metal to create hybrid automotive front-end assemblies has been developed by BASF AG in Germany. The approach is to form projecting annular "collars" in a metal sheet and then to cold-press those collars into parts. Undercuts in the metal collars act as claws to firmly lock together the sheet metal and molded plastic.

"Our new assembly system is simple, reliable and cost-effective," declares Dr. Ulrich Endemann, head of BASF's application research for hybrid systems in Ludwigshafen, Germany. Hybrid technology is gaining ground in automotive front-end development because it realizes cost, weight, and space savings not possible when plastic or metal are used alone (see PT, July '02, p. 33).

Metal collar forming is a two-step process using standard metal-shaping tools to punch holes in the sheet and draw and shape these into collars with undercuts to enhance joining strength. BASF reports that about 1100 lb of force are needed to press a 5-mm-diam. collar into a typical plastic part.

Endemann says extensive testing of BASF's collar-joining approach shows the method works well with a number of reinforced and unreinforced materials, including nylons, PBT, and polypropylene, although most work to date has been with 30% glass-filled nylon 6 and 66. He says the pressing step uses low enough speed to impose no impact shock on the plastic. Micro-photography reveals no significant crazing or fracturing when metal collars are pressed into the plastic. Finally, this joining method is unaffected by any stress relaxation in the plastics that might occur during use.

BASF reports that tests of its hybrid joining system are under way in several collaborative programs covered by non-disclosure agreements. Commercial applications are expected to emerge soon. The technology is also available from BASF Corp. in North America.

Competitive advantages

BASF claims that collar joining provides advantages over other means of plastic-metal joining. One approach patented a decade ago by Bayer AG in Germany involves overmolding glass-filled nylon 6 onto selected areas of sheet-metal inserts placed in an injection mold. The plastic flows through holes in the inserts to form strong, rivet-like joints. Other suppliers, including Rhodia in France and Dow Automotive in the U.S., have developed methods involving secondary steps like heat staking, riveting, and adhesive bonding.

Collar joining is said to make parts with strength comparable to overmolded hybrid structures while also realizing potential for space and weight savings. "Our approach allows designers to utilize the plastics more efficiently," states Endemann. One reason is that collar joints can be positioned anywhere along the margin between metal and plastic, reportedly providing increased freedom that allows optimal distribution of the plastic. According to Endemann, placement of joining points in overmolded hybrids is limited due to gating and hot-runner design requirements in the tool as well as the requirement that parts must be demolded in one direction only.

In terms of cost, Endemann says collar joining offers simpler tooling and shorter cycle times for injection molding because the metal insertion step is eliminated. He claims that for most high-volume applications, these benefits outweigh the added cost of metal-forming presses and assembly robots required for collar joining.

BASF claims advantages over adhesive bonding methods too, including the "LESA" system developed by Dow. LESA (low-energy surface adhesive) allows long-glass reinforced PP to be bonded to steel without primer or pretreatment. Dow claims its system makes possible a closed-box design of front-end carriers, which in turn is said to enhance front-end impact performance. BASF argues that its method can realize similar results while avoiding the cost of adhesives and meeting any relevant health regulations.


BASF Corp., Plastic Materials, Mt. Olive, N.J.

(800) 222-3746,

Bayer Corp., Pittsburgh

(800) 662-2927,

Dow Automotive, Auburn Hills, Mich.

(800) 441-4369,

Rhodia Engineering Plastics Inc., Mississauga, Ont.

(800) 869-1230,
COPYRIGHT 2002 Gardner Publications, Inc.
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2002, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:auto parts
Author:Leaversuch, Robert
Publication:Plastics Technology
Geographic Code:4EUGE
Date:Oct 1, 2002
Previous Article:POE alloys replace liquid plasticizers in high-performance flexible PVC. (Materials).
Next Article:Reborn HPM launches new injection & extrusion machinery. (Machinery).

Related Articles
Solvay Polymers.
New automotive materials target reduced cost, higher performance.
Acknowledging innovation. (Automotive Observations).
Long-glass PP makes inroads in automotive front ends. (Automotive: Close-Up).
Strength and beauty: new nylons bring both to under-hood parts.
Plastic-metal hybrids make headway on and off the road.
Nylon oil sump gets its start in trucks.
Steeling plastics: having conquered interiors and trim parts, plastics are now making inroads into automotive structural components with the help of...
For cars, a new style of plastic-metal hybrid.
First aluminum-plastic hybrid.

Terms of use | Copyright © 2018 Farlex, Inc. | Feedback | For webmasters