inSilicon, HP, Intel, Lucent, Cypress, ST Microelectronics, Texas Instruments, Fujitsu, and Kawasaki LSI Back New USB 2.0 Transceiver Interface.Business Editors/High-Tech Writers SAN JOSE, Calif.--(BUSINESS WIRE)--March 13, 2000 UTMI UTMI USB 2.0 Transceiver Macrocell Interface UTMI Usb Transceiver Macrocell Interface Interface Enhances USB USB in full Universal Serial Bus Type of serial bus that allows peripheral devices (disks, modems, printers, digitizers, data gloves, etc.) to be easily connected to a computer. 2.0 Interoperability inSilicon, Hewlett-Packard Company, Intel, Lucent Microelectronics, Cypress Semiconductor, ST Microelectronics, Texas Instruments, Fujitsu, and Kawasaki LSI LSI: see integrated circuit. (Large Scale Integration) Between 3,000 and 100,000 transistors on a chip. See SSI, MSI, VLSI and ULSI. announce their support for a proposed USB 2.0 transceiver interface specification, intended to improve interoperability between USB 2.0 products developed by different manufacturers. Developed by Intel Corporation and circulated within the industry as the USB 2.0 Transceiver Macrocell Interface (UTMI), the specification partitions USB 2.0 functionality between the USB 2.0 Transceiver and Parallel Interface Engine. UTMI is similar in concept to the Ethernet MII 1. (body) MII - A consortium of Microsoft, IBM, and Intel. 2. (storage) MII - A broadcast component video tape format licensed by Panasonic. (Media Independent Interface) communication standard, which defines the interface between Layer 1 Ethernet PHYs and Layer 2 Media Access Controllers. UTMI Simplifies USB 2.0 Development Adoption of a well-defined USB 2.0 media independent interface would broaden the implementation choices available to USB designers. With a common UTMI specification, designers could choose either external transceiver chips or a semiconductor intellectual property (SIP) macrocell to integrate transceiver functionality directly into the ASIC (Application Specific Integrated Circuit) Pronounced "a-sick." A chip that is custom designed for a specific application rather than a general-purpose chip such as a microprocessor. design. With multiple ASIC, FPGA (Field Programmable Gate Array) A type of gate array that is programmed in the field rather than in a semiconductor fab. Containing up to hundreds of thousands of gates, there are a variety of FPGA architectures on the market. , and SIP suppliers supporting the UTMI standard, designers would have a wider selection of vendors from which to choose. "With widespread adoption, UTMI will increase flexibility and speed deployment of USB 2.0 peripherals," stated Barry Hoberman, chief technology officer of inSilicon. "Customers will be able to mix-and-match standard USB components, as well as ASIC or FPGA SIP blocks that are developed to the UTMI specification." inSilicon, who originally proposed the UTMI concept, has provided USB semiconductor IP building blocks for more than 100 USB 1.1 designs, and is currently developing USB 2.0 products based around the UTMI specification. "We are looking for Looking for In the context of general equities, this describing a buy interest in which a dealer is asked to offer stock, often involving a capital commitment. Antithesis of in touch with. a smooth transition to high volume as the overall USB 2.0 market demand increases," said Ed Beeman, USB 2.0 product architect manager for HP's Greeley Hardcopy Division. "Having the choice of a stand-alone transceiver chip or an integrated ASIC transceiver with a common interface would be a real plus. This is clearly a win/win for everyone." "A standard interface simplifies designs and will speed to market USB 2.0 products," stated Kevin Lynch, strategic marketing manager, Lucent Technologies Microelectronics Group. "Our standard product and ASIC customers are time-to-market driven, and cannot afford to customize interfaces for every USB 2.0 design. The UTMI standard streamlines both the design process and USB 2.0 interoperability." "The UTMI specification allows us and our customers to work with a common interface to create a range of ASSP (Application Specific Standard Part) An ASIC chip that is designed as a generic device for a particular market. Whereas an ASIC is typically used only by its creator, ASSPs are used by many different companies in the design of their products. See ASIC. parts, including low-cost, highly integrated single-chip solutions," said Cathal Phelan, vice-president, Interface Products, at San Jose, Calif.-based Cypress Semiconductor. Cypress is the market leader in USB controller chips with more than 35 million units shipped. "Having a common interface for system peripheral chips would be a real plus, streamlining the design process and speeding time-to-market." "The integration of a standalone transceiver solution into an ASIC as an embedded block provides optimized cost and overall system simplification. It is therefore important that a standard interface be specified and used throughout the industry. UTMI adoption creates significant benefits, both for system makers and ASIC vendors," said Philippe Magarshack, group vice president for Design Automation, Central R&D, ST Microelectronics. "The UTMI will allow us to provide an optimum solution across the USB 2.0 design spectrum. Early adopters will benefit from the standalone transceiver by getting their designs to market earlier, and then the integrated PHY See physical layer and physical. will provide a smooth path to economical high-volume production," said Dan Harmon, strategic marketing manager for USB Products at Texas Instruments. TI is the leading supplier of USB 1.1 hub controller silicon. "The commonality of the interface between the high-speed serial function and the byte processing function will facilitate USB hub and peripheral design." "The proliferation of products incorporating USB 1.0 has inspired us to begin work on all products to include USB 2.0," said Joel Silverman, vice president of marketing, Kawasaki LSI U.S.A., and a member of the USB Implementers Forum The USB Implementers Forum, USB-IF, is a non-profit organisation to promote and support the Universal Serial Bus. Its main activities are the promotion and marketing of USB, Wireless USB, USB On-The-Go, and the maintenance of the specifications, as well as a compliance program. . "With this dramatically faster specification, USB will become the preferred bus for next-generation equipment for Imaging, networking and storage devices," said Silverman. "Kawasaki LSI believes that the UTMI specification will help to enable the rapid development of USB 2.0-compliant devices by offering our customers a standard ASIC style approach for this high-speed interface. Without UTMI the development of 2.0 peripherals would be longer and more expensive. UTMI will enable the release of USB 2.0 products this year." The UTMI specification provides for two primary interfaces. An 8-bit interface operating at 60MHz (MegaHertZ) One million cycles per second. It is used to measure the transmission speed of electronic devices, including channels, buses and the computer's internal clock. A one-megahertz clock (1 MHz) means some number of bits (16, 32, 64, etc. is intended for standard products and ASIC implementations. An optional 16-bit data interface operates at 30MHz, and is intended to support FPGA-based designs. The specification is provided with a royalty-free license and is available for download from Intel's website at http://developer.intel.com/technology/usb/download/USB_TMI TMI Too Much Information TMI Three Mile Island TMI TRMM Microwave Imager TMI Transactions on Medical Imaging TMI Texas Military Institute TMI Teen Missions International TMI Tauber Manufacturing Institute _spec.pdf. "While the UTMI specification was designed for integrated USB 2.0 ASICs, the interface can also be used as the interface to discrete USB 2.0 transceivers," stated Jason Ziller, technology initiatives manager at Intel Corporation. "We are pleased that these key USB companies have stepped forward to support the USB 2.0 transceiver interoperability initiative, and we are looking forward to the resulting USB 2.0-enabled products which will broaden and enhance the computer experience of the end user." About USB 2.0 USB enables cost-effective, outside-the-box connectivity with plug-and-play capability for personal computer, consumer, industrial, embedded computing and PC peripheral products. The current USB 1.1 standard is widely deployed in hundreds of millions of personal computers and peripherals including printers, scanners, keyboards, and digital cameras. USB 2.0 is a new version of the specification designed to increase USB performance. Fully compatible with USB 1.1, the USB 2.0 specification increases performance to 480 Mbit/sec compared to the current USB maximum transfer rate of 12 Mbit/sec. The USB Implementer's Forum, an industry group consisting of over 600 member companies, supports the testing and promotion of USB products for its members. More information can be found at http://www.usb.org. About the Participating Companies About inSilicon inSilicon Corporation, a wholly owned subsidiary Wholly Owned Subsidiary A subsidiary whose parent company owns 100% of its common stock. Notes: In other words, the parent company owns the company outright and there are no minority owners. of Phoenix Technologies Ltd., is a provider of communications and connectivity semiconductor intellectual property (SIP) and software. inSilicon offers SIP and system software that speed customer time-to-market for systems-on-chip and embedded systems designs. The Company's communications standards-based, silicon-proven SIP solutions for Ethernet, VCI VCI Verband Der Chemischen Industrie (German: federation of chemical Industries) VCI Virtual Channel Identifier (used in Asynchronous Transfer Mode) VCI Veterinary Council of India VCI Virtual-Circuit Identifier , USB, IEEE (Institute of Electrical and Electronics Engineers, New York, www.ieee.org) A membership organization that includes engineers, scientists and students in electronics and allied fields. 1394, PCI-X (PCI eXtended) An enhanced PCI bus technology originally developed by IBM, HP and Compaq that is backward compatible with existing PCI cards. PCI and 32-bit PCI-X slots are physically the same, and PCI cards can plug into PCI-X slots. , PCI (1) (Payment Card Industry) See PCI DSS. (2) (Peripheral Component Interconnect) The most widely used I/O bus (peripheral bus). , IrDA, and AGP (Accelerated Graphics Port) A high-speed 32-bit port from Intel for attaching a display adapter to a PC. It provides a direct connection between the card and memory, and only one AGP slot is on the motherboard. deliver high system efficiency, interoperability, and performance. Information about inSilicon and its products is available at http://www.in-silicon.com. About HP Hewlett-Packard Company -- a leading global provider of computing and imaging solutions and services for business and home -- is focused on capitalizing on the opportunities of the Internet and the proliferation of electronic services. HP plans to spin off Agilent Technologies and distribute its shares to HP shareowners by mid-calendar year 2000. Agilent consists of HP's test and measurement, semiconductor products, chemical analysis and healthcare solutions businesses, and has leading positions in multiple market segments. HP has 85,400 employees worldwide and had total revenue from continuing operations continuing operations Parts of a business that are expected to be maintained as an ongoing segment of an overall business operation. Income and losses from continuing operations are reported separately if any segments have been discontinued during the of $42.4 billion in its 1999 fiscal year. Information about HP, its products and the company's Year 2000 program can be found on the World Wide Web at http://www.hp.com. About Intel Intel, the world's largest chip maker, is also a leading manufacturer of computer, networking and communications products. Additional information about Intel is available at http://www.intel.com/pressroom. About Lucent Microelectronics Lucent Technologies designs, builds and delivers a wide range of public and private networks, communications systems and software, data networking systems, business telephone systems and microelectronics components. Bell Labs is the research and development arm for the company. For more information on Lucent Technologies, headquartered in Murray Hill, N.J., U.S.A., visit its web site at http://www.lucent.com. Lucent's Microelectronics Group designs and manufactures integrated circuits and opto-electronics components for the computer and communications industries. More information about Lucent's Microelectronics Group can be found at http://www.lucent.com/micro. About Cypress Cypress Semiconductor provides high-performance integrated circuit solutions "By Engineers. For Engineers(tm)" for fast-growing companies in fast-growing markets, including data commu-nications, telecommunications, computation, consumer products, and industrial-control. With a focus on emerging communications applications, Cypress's product lines include networking-optimized and micropower static RAMs; high-bandwidth multi-port and FIFO (First In First Out) A storage method that retrieves the item stored for the longest time. Contrast with LIFO. See traffic engineering methods. FIFO - first-in first-out memories; high-density programmable logic devices; timing technology for PCs and other digital systems; and controllers for Universal Serial Bus See USB. (hardware, standard) Universal Serial Bus - (USB) An external peripheral interface standard for communication between a computer and external peripherals over an inexpensive cable using biserial transmission. (USB). Cypress is No. 1 in the USB and clock chip markets. About ST Microelectronics ST Microelectronics (formerly SGS-THOMSON Microelectronics) is a global independent semiconductor company, whose shares are traded on the New York Stock Exchange New York Stock Exchange (NYSE) World's largest marketplace for securities. The exchange began as an informal meeting of 24 men in 1792 on what is now Wall Street in New York City. , on the ParisBourse and on the Milan Stock Exchange Milan Stock Exchange The largest regional stock exchange in Italy, facilitating more than 90% of the country's trading volume. . The Company designs, develops, manufactures and markets a broad range of semiconductor integrated circuits (ICs) and discrete devices used in a wide variety of microelectronic applications, including telecommuni-cations systems, computer systems, consumer products, automotive products and industrial automation and control systems. In 1999, the Company's net revenues were $5.056 billion and net earnings were $547 million. Further information on ST can be found at http://www.st.com. About TI Texas Instruments Incorporated, headquartered in Dallas, Texas, is a global semiconductor company and the world's leading designer and supplier of digital signal processing See DSP. Digital Signal Processing - (DSP) Computer manipulation of analog signals (commonly sound or image) which have been converted to digital form (sampled). and analog technologies. TI is also a leading silicon supplier supporting many communication protocols, including PCI, Cardbus, IEEE 1394, ADSL See DSL. ADSL - Asymmetric Digital Subscriber Line , Ethernet, and USB. The company's businesses include materials and controls and educational and productivity solutions. The company has manufacturing or sales operations in more than 25 countries. About Fujitsu Fujitsu Limited (TSE See Tokyo Stock Exchange. TSE 1. See Tokyo Stock Exchange (TSE). 2. See Toronto Stock Exchange (TSE). :6702) is a leading provider of comprehensive information technology and network solutions for the global marketplace. Comprising over 500 group companies and affiliates worldwide -- including ICL (International Computers Ltd., London) The former name of Fujitsu Services, the European-centered arm of the global Fujitsu Group and one of the leading IT services companies in Europe, the Middle East and Africa. , Amdahl and DMR (Digital Media Receiver) See digital media hub. Consulting Group -- the Fujitsu Group had consolidated revenues of 5.24 trillion yen ($43.3 billion) in the fiscal year ended March 31, 1999. With world-class hardware and software technology in computers, telecommunications and microelectronics, and a corps of 55,000 systems and services experts around the world, Fujitsu is uniquely positioned to harness the power of the network to help its customers succeed. Altogether, the Fujitsu Group has 188,000 employees and operations in over 100 countries. Information about Fujitsu is available at http://www.fujitsu.co.jp/index-e.html. About Kawasaki LSI Kawasaki LSI U.S.A. is the North American affiliate of Kawasaki LSI, which in turn is a division of Kawasaki Steel in Japan. The company provides the product development, marketing, sales and technical support for customers in the Americas in connectivity and data communications applications. Note to Editors: inSilicon is a trademark of inSilicon Corporation. All other trademarks are the property of their respective owners. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion