Printer Friendly

Who ya gonna call?

There are several configurations of the commander's power distribution panel on the M1A1 tank. Most of them can be tested using the direct support electrical system test set (DSESTS) with the operator interface unit (OIU).

The only exception is the latest panel, NSN 6110-01-497-3343 (PN 12549797-3). That panel can be tested only using the DSESTS with the common support function module (CSFM) using DSPS 32.1 software.

If your unit has the new panel, but does not have the capability to test it, go to the PM Combat Systems website: http://www.teamarmordiagnostics.com

MY POWER DISTRIBUTION PANEL IS ON THE FRITZ! CAN YOU TEST IT?

[ILLUSTRATION OMITTED]

IT DEPENDS ON WHAT CONFIGURATION YOU HAVE. LET ME TAKE A LOOK.

[ILLUSTRATION OMITTED]

ONCE THERE, CLICK ON POINTS OF CONTACT IN THE LEFT-HAND COLUMN.

[ILLUSTRATION OMITTED]

THE POCS ARE LISTED UNDER ABRAMS PROGRAM MANAGEMENT OFFICE AND WOLVERINE AND INTEGRATED LOGISTICS SUPPORT.

[ILLUSTRATION OMITTED]
COPYRIGHT 2005 PS Magazine
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2005, Gale Group. All rights reserved. Gale Group is a Thomson Corporation Company.

 Reader Opinion

Title:

Comment:



 

Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:M1A1 Tank ...; testing distribution panels
Publication:PS, the Preventive Maintenance Monthly
Article Type:Brief Article
Geographic Code:1USA
Date:Dec 1, 2005
Words:152
Previous Article:Staying on the verification track.
Next Article:You need both kits.
Topics:


Related Articles
Don't blow-off bolt choice.
Abrams tank still far from retirement.
High-pressure water, yes or no?
Which check checks out?
Broken STE-M1/FVS is a dead end.
You need both kits.
Extracting a solution.
The future is here, today.
Solving the panel puzzle.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters