Printer Friendly

Waterjet cutting on the fly.

The Hydraulic Versacutter is a portable waterjet cutting and beveling system that is hydraulically-controlled that moves along rigid or flexible track to cut flat or curved surfaces. It cuts with a 60,000 psi abrasive waterjet. It is designed for cutting pipelines, steel reinforced concrete reinforced concrete

Concrete in which steel is embedded in such a manner that the two materials act together in resisting forces. The reinforcing steel—rods, bars, or mesh—absorbs the tensile, shear, and sometimes the compressive stresses in a concrete
, reactor vessels reactor vessel
The protective containment vessel surrounding the nuclear fission core in a nuclear reactor.
, and fabricated fab·ri·cate  
tr.v. fab·ri·cat·ed, fab·ri·cat·ing, fab·ri·cates
1. To make; create.

2. To construct by combining or assembling diverse, typically standardized parts:
 metal structures. It cuts without flames and does not generate heat so it can be used in areas where flames are restricted. It also eliminates heat-affected zones. It is powered by the company's waterjet intensifier in·ten·si·fi·er  
n. Grammar
See intensive.


a word, esp. an adjective or adverb, that intensifies the meaning of the word or phrase that it modifies, for example, very
 pumps, which are available in electric or diesel models up to 280 hp. Jet Edge, Inc.

COPYRIGHT 2009 Nelson Publishing
No portion of this article can be reproduced without the express written permission from the copyright holder.
Copyright 2009 Gale, Cengage Learning. All rights reserved.

 Reader Opinion




Article Details
Printer friendly Cite/link Email Feedback
Title Annotation:NEW PRODUCTS
Publication:Modern Applications News
Date:May 1, 2009
Previous Article:Job planning.
Next Article:A good type of boring.

Terms of use | Copyright © 2014 Farlex, Inc. | Feedback | For webmasters