Walk-in batch oven.The No. 924 is a gas-fired, 350[degrees]F (177[degrees]C) walk-in batch oven Batch ovens are a type of furnace used for thermal processing. They are used in numerous production and laboratory applications, including curing, drying, sterilizing, aging, and other process-critical applications. , currently used for curing epoxy epoxy Any of a class of thermosetting polymers, polyethers built up from monomers with an ether group that takes the form of a three-membered epoxide ring. The familiar two-part epoxy adhesives consist of a resin with epoxide rings at the ends of its molecules and a curing at a customer's facility. Workspace dimensions measure 84" wide x 144" deep x 108" high. A modulating natural gas burner with 400,000 btu/hr, installed is used to heat the unit, while 12,000 cfm total from two 5 hp recirculating blowers provide combination airflow to the workloads. This large-capacity walk-in batch oven features 4" insulated in·su·late tr.v. in·su·lat·ed, in·su·lat·ing, in·su·lates 1. To cause to be in a detached or isolated position. See Synonyms at isolate. 2. walls throughout, an aluminized steel Aluminized steel is steel that has been hot-dip coated both sides with aluminum-silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminum coating, producing a material with a unique combination of properties possessed neither by steel interior and exterior, three independent doors for workspace access on the front of the oven, standard double doors on the rear of the oven, a 2" insulated floor with three pairs of built-in truck wheel guide tracks and integral 6" I-beam supports to raise the oven above the factory floor level. All safety equipment required by IRI Iri (ē`rē`), former city, North Jeolla (Cholla) prov., SW South Korea. An agricultural center and transportation hub, it was absorbed into Iksan. , FM and National Fire Protection Association Standard 86 for gas-heated equipment is onboard the No. 942, including a 325 cfm, 1/3 hp powered forced exhauster for quick purge and cool down, dampers On the intake and exhaust for accelerated cooling, and a 10" diameter circular chart recorder and digital programming temperature controller. (Grieve) www.grievecorp.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion