Vibratory density systems.The manufacturer of Dynatol density systems designs systems for the measurement of density, specific gravity specific gravity, ratio of the weight of a given volume of a substance to the weight of an equal volume of some reference substance, or, equivalently, the ratio of the masses of equal volumes of the two substances. , [degrees] Brix, Baume, API gravity The American Petroleum Institute gravity, or API gravity, is a measure of how heavy or light a petroleum liquid is compared to water. If its API gravity is greater than 10, it is lighter and floats on water; if less than 10, it is heavier and sinks. , percent solids and percent concentration of liquids and slurries. Dynatrol systems utilize vibratory vibratory /vi·bra·to·ry/ (vi´brah-tor?e) vibrating or causing vibration. vibratory vibrating or causing vibration; vibritile. principles to provide continuous measurement at on-line process conditions. The Dynatrol density system consists of a density cell and digital converter. By design, the density cell is said to satisfy a wide range of requirements. It is available in a full spectrum of corrosion-resistant materials. The cell is both weather-tight and explosion-proof. It is said to meet the needs of broad temperature and pressure ratings. With no moving parts Moving parts are the components of a device that undergo continuous or frequent motion, most commonly rotation. "Parts" only include the mechanical components which does not include fuel, or any other gas or liquid. , it is said to be virtually wear-free, ensuring a long operating life, according to the manufacturer. The digital converter (Series 2000) incorporates an on-board microcontroller and liquid crystal display liquid crystal display (LCD) Optoelectronic device used in displays for watches, calculators, notebook computers, and other electronic devices. Current passed through specific portions of the liquid crystal solution causes the crystals to align, blocking the passage of light. of the measured variable, temperature, frequency and other calibration data. It has a 4-20 mA standard output and RS-232 communication. (Automation Products) Circle 107 on card |
|
||||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion