Used, rebuilt machinery suppliers.The following directory lists the suppliers of used and rebuilt processing machinery to the rubber industry, with address, contact information and type(s) of machinery offered. Rebuilding capabilities are listed on the following pages. Akron Akron (ăk`rən), city (1990 pop. 223,019), seat of Summit co., NE Ohio, on the Little Cuyahoga River; inc. 1865. Once the heart of the nation's rubber industry, Akron still contains the headquarters of some rubber corporations and chemical and Special Machinery, Inc. David Poling 2740 Cory Ave AVE Avenue AVE Average AVE Alta Velocidad Espanola (train between Madrid and Seville) AVE Alta Velocidad Española (Spanish: High Speed Train) AVE Audio Video Entertainment AVE Advertising Value Equivalent . Akron, OH 44314-1396 (330) 753-1077 Fax: (330) 753-7308 Types of machinery: Tire uniformity Tire Uniformity refers to the dynamic mechanical properties of pneumatic tires as strictly defined by a set of measurement standards and test conditions accepted by global tire and car makers. machines Akron Steel Fabricators Keith Keith may refer to: People with the given name Keith:
3291 Manchester Manchester, city, England Manchester (măn`chəstər, –chĕs'tər), city and metropolitan district (1991 pop. 397,400), NW England, on the Irwell, Medlock, Irk, and Tib rivers. Rd. Akron, OH 44319 (330) 644-0616 Fax: (330) 644-0105 Website: www.akrensteel.com Email: kline1@akronsteel.net Types of machinery: Calenders, mill blenders, slab cutters Alsop Al·sop , Joseph Wright, Jr. 1910-1989. American journalist who with his brother Stewart (1914-1974) wrote the syndicated column "Matter of Fact" (1945-1958). Industrial Services Don Alsop, President 1535 E. Naomi St. P.O. Box 33802 Indianapolis Indianapolis (ĭn'dēənă`pəlĭs), city (1990 pop. 731,327), state capital and seat of Marion co., central Ind., on the White River; selected 1820 as the site of the state capital (which was moved there in 1825), inc. 1847. , IN 46203. (317) 783-0885 Fax: (317) 783-0891 Types of machinery: Extruders, tire building equipment, calenders, vulcanizing presses, mills, tube equipment, autoclaves American American, river, 30 mi (48 km) long, rising in N central Calif. in the Sierra Nevada and flowing SW into the Sacramento River at Sacramento. The discovery of gold at Sutter's Mill (see Sutter, John Augustus) along the river in 1848 led to the California gold rush of Equipment Specialists, Inc. Brad Scott Brad Scott may refer to:
307 West Chicago West Chicago, city (1990 pop. 14,796), Du Page co., NE Ill.; inc. 1906. Mostly residential, the city produces chemicals. Rd. Sturgis Sturgis is a surname, and may refer to: People
(616) 651-4516 Fax: (616) 659-4044 Website: www.usedrubberequip.com Email: aes@usedrubberequip.com Types of machinery: Extruding machines, injection presses, compression presses ASB ASB Asbestos ASB Arbeiter Samariter Bund (German medical help organisation) ASB Anti-Social Behaviour ASB Accounting Standards Board (UK FRC) ASB Aarhus School of Business Industries, Inc. Charles Charles, archduke of Austria Charles, 1771–1847, archduke of Austria; brother of Holy Roman Emperor Francis II. Despite his epilepsy, he was the ablest Austrian commander in the French Revolutionary and Napoleonic wars; however, he was handicapped by M. Kay KAY Kick Ass Year KAY Kansas Association of Youth 1031 Lambert Lambert may refer to
Barberton Barberton (bär`bərtən), city (1990 pop. 27,623), Summit co., NE Ohio, an industrial suburb of Akron, on the Tuscarawas River; inc. 1892. Rubber products, metal- and ironwork, boilers, and insulation are among its manufactures. , OH 44203-1689 (330) 753-8458 Fax: (330) 753-7550 E-mail: cmkay@asbindustries.com Website: www.asbindustries.com Types of machinery: Presses Barwell Barwell is a village in Leicestershire, England, known as the Stream of the Boar. Barwell has a population of around 6200. The name Barwell came from a boar that used to drink from the well near the brook in Barwell, soon it was Boarwell, then later in time it became 'Barwell' the International Ltd. Gary Gary, city (1990 pop. 116,646), Lake co., NW Ind., a port of entry on Lake Michigan; inc. 1909. Gary was founded by the U.S. Steel Corporation, which purchased the land in 1905 and landscaped it for a city. Cowdrey, Managing Director 2 Rowles Way Buckingway Business Park Swavesy, Cambridge Cambridge, city, Canada Cambridge (kām`brĭj), city (1991 pop. 92,772), S Ont., Canada, on the Grand River, NW of Hamilton. It was formed in 1973 with the amalgamation of Galt, Hespeler, and Preston, all founded in the early 19th cent. CB4 5QX England England, the largest and most populous portion of the United Kingdom of Great Britain and Northern Ireland (1991 pop. 46,382,050), 50,334 sq mi (130,365 sq km). It is bounded by Wales and the Irish Sea on the west and Scotland on the north. +44(0) 1954-230383 Fax: +44(0) 1954-230821 Website: www.barwell.com Email: gcowdrey@barwell.com Types of machinery: Extruders, preformers, dusters, granulators, injection presses, cooling systems cooling systems for housed animals include spraying of roofs with water, evaporative pads with fans, foggers and misters; for pastured animals shelter from the sun by trees or artificial shade devices and cooling ponds are used. , mold mold, name for certain multicellular organisms of the various classes of the kingdom Fungi, characteristically having bodies composed of a cottony mycelium. The colors of molds are caused by the spores, which are borne on the mycelium. cleaning E.H. Benz Benz , Karl Friedrich 1844-1929. German automobile pioneer credited with manufacturing the first vehicle powered with an internal-combustion engine, patented in 1886. Co., Inc. Ted Benz, President 73 Maplehurst Ave. Providence Providence, city (1990 pop. 160,728), state capital and seat of Providence co., NE R.I., a port at the head of Providence Bay; founded by Roger Williams 1636, inc. as a city 1832. , RI 02908 (401) 331-5650 Fax: (401) 331-5685 Types of machinery: Tensile tensile, adj having a degree of elasticity; having the ability to be extended or stretched. testers, rheometers, viscometers, impact testers, abraders, brittlepoint, test tube alum alum (ăl`əm), any one of a series of isomorphous double salts that are hydrated sulfates of a univalent cation (e.g., potassium, sodium, ammonium, cesium, or thallium) and a trivalent cation (e.g. . block ovens, plastometers, molds, dies, presses BRJ BRJ Baseball Research Journal BRJ Bandwidth Change Reject Engineering, Inc. Jim Broch
1225 E. Summit St. Alliance, OH 44601-3234 (330) 821-4537 Fax: (330) 821-1261 Types of machinery: Rebuilders of presses and post inflators Commission Brokers Inc. Martin Kenner Kenner, city (1990 pop. 72,033), Jefferson parish, SE La., a suburb of New Orleans; inc. 1952. Kenner has grown since the 1970s into an area of moderate- to upper-income housing developments. , Pres. P.O. Box 8456 Cranston Cranston, industrial city (1990 pop. 76,060), Providence co., central R.I., a residential suburb of Providence; inc. as a town 1754, as a city 1910. Its manufactures include machinery, plastics, rubber products, and chemicals. , RI 02920 (401) 943-3777 Fax: (401) 943-3670 Website: www.commissionbrokers.com Email: marty137 @aol.com America Online's Internet domain address. When sending e-mail to an AOL subscriber via the Internet, the aol.com is the last part of the address; for example: jjones@aol.com. Types of machinery: All types Davey Davey may refer to:
Richard Ri·chard , Joseph Henri Maurice Known as "Rocket." 1921-2000. Canadian hockey player. A right wing for the Montreal Canadiens (1942-1960), he led his team to eight Stanley Cup championships and was the first player to score 50 goals in a Schaack, President 822 Cleveland Cleveland, former county, England Cleveland, former county, NE England, created under the Local Government Act of 1972 (effective 1974). It was composed of the county boroughs of Hartlepool and Teeside and parts of the former counties of Durham and Rd. Ravenna Ravenna, city, Italy Ravenna (rävĕn`nä), city (1991 pop. 135,844), capital of Ravenna prov., in Emilia-Romagna, N central Italy, near the Adriatic Sea (with which it is connected by a canal). , OH 44266 (330) 298-9244 Fax: (330) 298-9266 Website: www.daveyindustries.com Email: richard@daveyindustries.com Types of machinery: All types Davis-Standard Daniel Daniel, book of the Bible Daniel, book of the Bible. It combines "court" tales, perhaps originating from the 6th cent. B.C., and a series of apocalyptic visions arising from the time of the Maccabean emergency (167–164 B.C. Szewc, Business Area Mgr., Elastomers 1 Extrusion Dr. Pawcatuck Pawcatuck is a census-designated place (CDP) in New London County, Connecticut, United States. The population was 5,474 at the 2000 census. Geography According to the United States Census Bureau, the CDP has a total area of 9.6 km² (3.7 mi²). 9.6 km² (3. , CT 06379 (860) 599-6365 Fax: (860) 599-6258 Website: www.davis-standard.com Email: dszewc@davis-standard.com Types of machinery: Extruders Epco Steve Schroeder Steven A. Schroeder is Distinguished Professor of Health and Health Care at the University of California, San Francisco (UCSF). He served as the President and CEO of the Robert Wood Johnson Foundation from 1990 to 2002. Dr. 2225 Cedar cedar, common name for a number of trees, mostly coniferous evergreens. The true cedars belong to the small genus Cedrus of the family Pinaceae (pine family). St. Fremont Fremont (frē`mŏnt). 1 City (1990 pop. 173,339), Alameda co., W Calif., on San Francisco Bay; inc. 1956. Long an agricultural center, with champagne vineyards founded (1870) by Leland Stanford, it still ships fruits and vegetables. , OH 43420 (419) 334-2631 Fax: (419) 334-2822 Types of machinery: Presses, mills, calenders, extruders, mixers Erie Erie, indigenous people of North America Erie (ĭr`ē), indigenous people of North America of the Iroquoian branch of the Hokan-Siouan linguistic stock (see Native American languages). Mill and Press John A. Nowak, President Greg GREG Great Egg Harbor National Scenic and Recreational River (US National Park Service) Maus, Vice President 953 E. 12th St. (zip (1) To compress a file with PKZIP. See ZIP file. (2) (Zip) A removable disk from Iomega. See Zip disk. (3) (ZIP) (Zig-Zag Inline P 16512) P.O. Box 6349 Erie, PA 16503 (814) 454-1581 Fax: (814) 454-7913 Website: www.empco-inc.com E-mail: sales@empco-inc.com Types of machinery." Presses, mills, extruders, calenders, auxiliary equipment Noun 1. auxiliary equipment - electronic equipment not in direct communication (or under the control of) the central processing unit off-line equipment , internal mixers Erie Press Systems George George, river, c.345 mi (560 km) long, rising in a lake on the Quebec-Labrador boundary, E Canada. It flows N through Indian Lake (125 sq mi/324 sq km) to Ungava Bay (an arm of Hudson Strait). M. Currie cur·rie n. Variant of curry2. , Executive V.P. 1253 West 12th St., P.O. Box 4081 Erie, PA 16512-4061 (814) 455-3941 Fax: (814) 456-4819 Website: www.eriepress.com Email: gmcurrie@eriepress.com Types of machinery: Presses Farrel William William, crown prince of Germany William or Frederick William, 1882–1951, crown prince of Germany, son of William II. In World War I he commanded (1914) an army on the Western Front and was nominal commander in the German attack Flaherty Fla·her·ty , Robert Joseph 1884-1951. American explorer and filmmaker whose works, including Nanook of the North (1922) and Moana (1926), were the first major documentaries. , Group V.R, Sales Guy Tiso, Repairs and Rebuilds, Mgr. 25 Main St. Ansonia, CT 06401-1601 (203) 736-5500 Fax: (203) 735-6267 Website: www.farrel.com Email: help@farrel.com Types of machinery: All types Federal Equipment Michael Kadis, President Larry Kadis, Vice President 8200 Bessemer Ave. Cleveland, OH 44127 (216) 271-3500 Fax: (216) 271-5210 Website: www.fedequip.com Email: deals@fedequip.com Types of machinery: All types of process equipment Gomaplast Machinery, Inc. Marcelo S Marcelo is a given name, which may refer to:
500 E. Henry St. Wooster, OH 44691 (330) 263-7845 Fax: (330) 263-7846 Website: www.gomaplast.com Email: sales@gomaplast.com Types of machinery: All types Hancock Engineering Inc. Frank A. Pascuzzo, President Robert B. Hancock, V.P. 150 E. Aurora Aurora, cities, United States Aurora (ərôr`ə, ô–). 1 City (1990 pop. 222,103), Adams and Arapahoe counties, N central Colo., a growing suburb on the east side of Denver; inc. 1903. St. Waterbury, CT 06708 (203) 757-4221 Fax: (203) 757-2709 Email: hancock@ingress An entrance. Contrast with "egress," which means exit. See ingress traffic. See also Ingres 2006. .com Types of machinery: Mixers, mills, calenders, extruders, presses HF Rubber Machinery, Inc. (Formerly known as ThyssenKrupp) Kim Bahner P.O. Box 8250 1701 N. Topeka Blvd. Topeka, KS 66608 (785) 235-2336 Fax: (785) 235-1331 Types of machinery: Mixers, extruders, bead bead Small object, usually pierced for stringing. It may be made of virtually any material—wood, shell, bone, seed, nut, metal, stone, glass, or plastic—and is worn or affixed to another object for decorative or, in some cultures, magical purposes. wrappers In data mining and treatment learning, wrappers were used by Ron Kohavi and George John. Their idea was to wrap their treatments learners in a preprocessor that would search to make subsets from the current set of attributes. , extruder rotary Rotary can refer to:
conical conical /con·i·cal/ (kon´i-k'l) cone-shaped. con·i·cal or con·ic adj. Of, relating to, or shaped like a cone. twin-screw sheeters, roller roller, common name for brightly colored Old World birds noted for performing somersaults in flight. They include the rollers proper (subfamily Coraciinae) and ground rollers (subfamily Brachypteraciinae die units, rebuilt and new HGR HGR Hanger HGR Hangar HGR Hand Grenade (Swedish military) HGR Hagerstown, MD, USA - Washington County Regional Airport (Airport Code) HGR Hardware and Garden Review Industrial Surplus Ron Tiedman, Sales Mgr. 20001 Euclid Ave. Euclid, OH 44117 (216) 486-4567 Fax: (216) 486-4779 Website: www.hgrindustrialsurplus.com Email: rtiedman@hgrindustrialsurplus.com Types of machinery: Used metal working, woodworking, plastics, air handling, material handling, dust collection Hudson Machinery Corp. Norman Bergeron, National Sales Mgr. P.O. Box 831 Haverhill, MA 01831 (978) 374-0303 Fax: (978) 373-7295 Types of machinery: Die cutting presses, slitters Hunter Hydraulics hydraulics, branch of engineering concerned mainly with moving liquids. The term is applied commonly to the study of the mechanical properties of water, other liquids, and even gases when the effects of compressibility are small. L.R. Hunter, President 2512 Columbus Rd., NE P.O. Box 7117 Canton Canton, cities, United States Canton. 1 City (1990 pop. 13,922), Fulton co., W central Ill., in the corn belt; inc. 1849. It is a trade and industrial center for a coal and farm area. 2 Town (1990 pop. 18,530), Norfolk co. , OH 44705 (330) 455-3983 Fax: (330) 455-6534 Types of machinery: Vulcanizing presses Icon Industries Thomas Jacques Thomas Alec Jacques, better known as Sandy Jacques, was a first class cricketer who played 28 games for Yorkshire County Cricket Club from 1927 to 1936. He also appeared in first class cricket for the 'Rest of England' and the Gentleman in 1927. 1522 Madison S Madison, cities, United States Madison. 1 City (1990 pop. 12,006), seat of Jefferson co., SE Ind., on the Ohio River; settled c.1806, inc. 1838. It is a port of entry and a tobacco marketing center. .E. Grand Rapids Grand Rapids, city (1990 pop. 189,126), seat of Kent co., SW central Mich., on the Grand River; inc. 1850. The second largest city in the state, it is a distribution, wholesale, and industrial center for an area that yields fruit, dairy products, farm produce, , MI 49507 (616) 241-1877 Fax: (616) 241-5578 Website: www.iconindustries.com Email: tom@iconindustries.com Types of machinery: Internal mixers, extruders, presses Industrial Rubber Machinery Larry Weber Weber, river, United States Weber (wē`bər), river, c.125 mi (200 km) long, rising in the Uinta Mts., N central Utah, and flowing north and northwest to join the Ogden River at Ogden. The combined stream flows to the Great Salt Lake. , President 503 Portage Lakes Portage Lake, inlet of Keweenaw Bay, c.20 mi (32 km) long and 2 mi (3.2 km) wide, N Mich., indenting the southeast shore of Keweenaw peninsula. An old portage route connected it with Lake Superior, and now a short ship canal, the Keweenaw Waterway, links the two lakes. Dr., Suite 2 Akron, OH 44319 (330) 645-0020 Fax: (330) 645-0070 Types of machinery: All types International Reserve Equipment Thomas (language) Thomas - A language compatible with the language Dylan(TM). Thomas is NOT Dylan(TM). The first public release of a translator to Scheme by Matt Birkholz, Jim Miller, and Ron Weiss, written at Digital Equipment Corporation's Cambridge Research Laboratory runs Mertz Four South Prospect Ave. P.O. Box 198 Claredon Hills, IL 60514-0198 (630) 325-7040 Fax: (630) 325-7045 Email: ireserve@cs.com Types of machinery: Used process equipment and machinery Jarvis Industries Inc. Jim Jarvis 3639 Waterloo Waterloo, town, Belgium Waterloo (vä`tərlō), commune (1991 pop. 27,860), Walloon Brabant prov., central Belgium, near Brussels. The battle of Waterloo (see Waterloo campaign) was fought just south of there on June 18, 1815. Rd. RO. Box 496 Randolph, OH 44265-0496 (330) 325-9507 Fax: (330) 325-9524 Types of machinery: Mechanical rubber goods presses JLN JLN Junior League of Nashville JLN Joplin, MO, USA - Municipal Airport (Airport Code) JLN Judaica Library Network of Metropolitan Chicago JLN Junior League of Norman Corp. Wendell Watson 28 Bowditch Dr. Worcester, MA 01605 (508) 853-4406 Fax: (508) 853-7902 Email: jlncopr.com Types of machinery: Mills, calenders, internal mixers, presses, extruder sheet take-off take-off part of the horse's jumping gait, the lifting of the forequarters off the ground and the thrust from the hindlegs at the beginning of the jump. machines, guillotine guillotine Instrument for inflicting capital punishment by decapitation. A minimal wooden structure, it supported a heavy blade that, when released, slid down in vertical guides to sever the victim's head. bale bale 1. a package of wool in a wool pack weighing 150-250 lb depending largely on whether it is greasy or scoured. 2. a compressed bundle of hay, either about 100 lb tied with wire or twine, or large, round, untied bales, as big as a small hay stack and referred to as 'big bales'. cutters JM Machinery Michael Dyer, President P.O. Box 378 Wadsworth, OH 44282 (330) 825-2400 Fax: (330) 825-0569 Website: www.jmmachinery.com Email: michaeldyer@jmmachinery.com Types of machinery: Internal mixers, mills, calenders, extruders, hydraulic presses, tire machinery Karder Rubber Machinery & Engineering 258 Kenmore Blvd. Akron, OH 44301 (330) 253-3377 Fax: (330) 253-4733 Types of machinery: Mills, calenders, internal mixers, presses, extruders, speed reducers, spare rolls and gears, lab equipment Klockner Desma-KDE Sales & Service L. Scott Early, President 2195 Arbor arbor Garden shelter providing privacy and partial protection from the weather, most commonly a lightweight, latticed framework (trellis) of wood or metal with interlaced branches of vines or climbing shrubs trained over it. Tech Dr. Hebron, KY 41048 (859) 525-6610 Fax: (859) 525-8972 Website: www.klocknerdesma.com Types of machinery: Presses Kobelco Stewart Boiling David A. Norman, V.P. Sales 1600 Terex Rd. Hudson, OH 44236 (330) 655-3111 Fax: (330) 656-9724 Website: www.ksbiusa.com Email: information@ksbi.com Types of machinery: Mills, calenders, mixers, tire presses, extruders, pelletizers, auxiliary equipment, tire curing presses Machinery Exchange Corp. Bob Thompson Thompson, city, Canada Thompson, city (1991 pop. 14,977), central Man., Canada, on the Burntwood River. A mining town, it developed after large nickel deposits were discovered in the area in 1956. , President P.O. Box 26073 Akron, OH 44319 (330) 896-0585 Fax: (330) 896-0147 Types of machinery: All types Mackey Bowley S.J. Winn J. Winn was a head football coach at the University of Kentucky in 1923. During his tenure he compiled a 4-3-2 record. Preceded by W. J. Juneau Kentucky Wildcats Football Coaches 1923 Succeeded by Fred J. Norfolk Road Industrial Estate Gravesend Kent, England DA12 2PT (44) 1474 363521 Fax: (44) 1474 334818 Email: fomac@dial.pipex.com Types of machinery: Hydraulic presses hydraulic press Machine consisting of a cylinder fitted with a piston (see piston and cylinder) that uses liquid under pressure to exert a compressive force upon a stationary anvil or baseplate. The liquid is forced into the cylinder by a pump. and rubber bale cutters M.I.R. Inc. Philip J. Sponheimer, President 103 Breault Rd.; P.O. Box 216 Beacon Beacon, city (1990 pop. 13,243), Dutchess co., SE N.Y., on the E bank of the Hudson River; settled 1663, inc. in 1913 when Fishkill Landing and Matteawan villages were united. Falls, CT 06403 (800) 833-3707 (203) 888-2541 Fax: (203) 888-5294 Types of machinery: Internal mixers, mills, calenders, presses Nerpco Richard Barnes Richard Barnes could be
534 Bethmour Rd. Bethany, CT 06525 (203) 393-3686 Types of machinery: Mills, calenders, internal mixers, presses, extruder sheet take-off machines, guillotine bale cutters NFM NFM Nebraska Furniture Mart NFM Network File Management NFM Network Fault Management NFM No Further Message NFM Near Field Monitor NFM National Firearms Museum (Fairfax, Virginia) NFM NATOPS Flight Manual NFM Northern Fowl Mite Iddon Limited Michael Iddon Quin St. Leyland Lancashire Lancashire (lăng`kəshĭr, –shər), county (1991 pop. 1,365,100), 1,878 sq mi (4,864 sq km), N England, on the Irish Sea. The county town is Lancaster. , PR5 1TB England 01-772-421258+431111 Fax: 01-772-431114 Types of machinery: Mills, calenders, cold fluid extruders, rubber profile curing systems, tire presses NFM Welding welding, process for joining separate pieces of metal in a continuous metallic bond. Cold-pressure welding is accomplished by the application of high pressure at room temperature; forge welding (forging) is done by means of hammering, with the addition of heat. Engineers Paul R. Roberson 577 Oberlin Rd., S.W. Massillon, OH 44647 (330) 837-3868 Fax: (330) 837-7727 Website: www.nfm.net Email: proberson@nfm.net Types of machinery: Mills/calenders, presses, extruders Northeast Millwright mill·wright n. One that designs, builds, or repairs mills or mill machinery. Noun 1. millwright - a workman who designs or erects mills and milling machinery Co., Inc. Richard Stankye 49 Burtville Ave. Derby, CT 06418 (203) 732-0551 Fax: (203) 732-0662 Types of machinery: Mills, calenders, internal machines, extruders OEM (Original Equipment Manufacturer) The rebranding of equipment and selling it. The term initially referred to the company that made the products (the "original" manufacturer), but eventually became widely used to refer to the organization that buys the products and Press Systems Inc. Mary Quinlan, Sales Mgr. 311 S. Highland Ave. Fullerton, CA 92865 (714) 449-7500 Fax: (714) 449-7510 Website: www.oempresssystems.com Email: sales@oempresssystems.com Types of machinery: Vacuum and non-vacuum rubber molding presses with automated au·to·mate v. au·to·mat·ed, au·to·mat·ing, au·to·mates v.tr. 1. To convert to automatic operation: automate a factory. 2. press loading and unloading Unloading Selling securities or commodities whose prices are dropping to minimize loss. , fully automatic controls Perry Videx Videx® Didanosine–ddI, see there 25 Mt. Laurel Laurel, cities, United States Laurel. 1 Town (1990 pop. 19,438), Prince Georges co., central Md., about halfway between Washington, D.C., and Baltimore; patented in the late 1600s, inc. 1870. Rd. Hainesport, NJ 08036 (609) 267-1600 Fax: (609) 267-4499 Types of machinery: Solids mixers, extruding machines, calendering calendering, a finishing process by which paper, plastics, rubber, or textiles are pressed into sheets and smoothed, glazed, polished, or given a moiré or embossed surface. machines RAK Machine, Inc. Tim Bragg, President 5814 Walworth Ave. Cleveland, OH 44102 (216) 631-7750 Fax: (216) 631-7790 Email: rakmachine@aol.com Types of machinery: Used and rebuilt mixers, mills and calenders, spare parts Spare parts, also referred to as Service Parts is a term used to indicate extra parts available and in proximity to the mechanical item, such as a automobile, boat, engine, for which they might be used. Spare parts are also called “spares. and installation Regloplas Corp. 1088 Miners Rd. St. Joseph, MI 49085 (888) 799-4110 Fax: (269) 428-115 Website: www.regloplasusa.com Email: info@regloplasusa.com Types of machinery: Temperature control for the process industry including temperature control units and chilling system, portable chillers Reliable Rubber & Plastic Machinery Thomas Liccardo 2008-14 Union Tpke. North Bergen North Ber·gen A community of northeast New Jersey north of Jersey City and across the Hudson River from Manhattan Island. Population: 59,500. , NJ 07047 (201) 865-1073 Fax: (201) 865-6878 Website: www.reliable-machinery.com Email: info@reliable-machinery.com Types of machinery: Mills, internal mixers, hydraulic presses, pumps, extruders, strainers Water lines or kitchen systems can get gravel, deposits that break free, and other stray items in the line. The velocity of the water pushing them, they can severely damage or clog devices installed in the flow stream of the water line. , lab equipment, calenders Rogers Industrial Products 532 S. Main St. Akron, OH 44311 (330) 535-3331 Fax: (330) 535-4408 Website: www.rogersusa.com Email: sales@rogersusa.com Types of machinery: Tire curing press, new, rebuilt, upgrades, parts service Rubber & Plastic Machinery Arthur S. Brudner, President/Owner 673 Robeson St. Fall River, MA 02720 (508) 672-6960 Fax: (508) 676-0141 Types of machinery: Internal mixers, mills, presses, injection molding injection molding n. A manufacturing process for forming objects, as of plastic or metal, by heating the molding material to a fluid state and injecting it into a mold. machines, calenders, cryogenic cryogenic /cry·o·gen·ic/ (-jen´ik) producing low temperatures. cry·o·gen·ic adj. 1. Relating to or producing low temperatures. 2. shot-blast deflashing, batch-off and strip-handling systems, extruders, feeders Rubber City Machinery Bob Westfall Bob Westfall (May 5, 1919 — October 23, 1980) was an American football fullback who played for the University of Michigan (1939-1941) and the Detroit Lions (1944-1947). In 1941 he was a consensus first-team All-American. , Exec. V.P./Sec. P.O. Box 2043; 1000 Sweitzer Ave. Akron, OH 44309 (330) 434-3500 Fax: (330) 434-2244 Website: www.rcmc.com Email: info@rcmc.com Types of machinery: Mills, compression presses, calenders, extruders, intensive mixers, vacuum presses, spare parts Rutil Maurizio Coscia 21050 Lonate Ceppino Lonate Ceppino is a comune (municipality) in the Province of Varese in the Italian region Lombardy, located about 35 km northwest of Milan and about 13 km south of Varese. As of 31 December 2004, it had a population of 4,321 and an area of 4.8 km². Varese, Italy 39 0331-816711 Fax: 39 0331-842700 Website: www.rutil.com Email: rutil@tin.it Types of machinery: Presses Scantland Industries 1092 N. Jacoby Rd. Akron, OH 44321 (330) 666-0518 Fax: (330) 666-8805 Website: www.scantland.com Email: admin@scantland.com Types of machinery: Tire building machinery, tooling for TBMs, parts for TBMs, bladder bladder /blad·der/ (blad´er) 1. a membranous sac, such as one serving as receptacle for a secretion. 2. urinary bladder. curing presses Skinner Skin·ner , B(urrhus) F(rederick) 1904-1990. American psychologist. A leading behaviorist, Skinner influenced the fields of psychology and education with his theories of stimulus-response behavior. Engine Robert McNabb, Jr., Mgr. Sales/Mktg. 337 W. 12th St. Erie, PA 16501 (800) 458-0861 (814) 454-7103 Fax: (814) 454-7108 Types of machinery: Intensive batch mixers, tilt mixers, sheet preformers and extruders (hot and cold feed) SME (1) (Small and Medium-sized Enterprise) See SMB. (2) (Subject Matter Expert) An individual who is well-versed in the policies and procedures of a particular department or division. Equipment LLC (Logical Link Control) See "LANs" under data link protocol. LLC - Logical Link Control John Fry John Fry may refer to:
3632 W. Market St. Suite 104 Fairlawn, OH 44333 (330) 665-2039 Fax: (330) 665-2099 Website: www.smeequipment.com Email: sales @smeequipment.com Types of machinery: Internal mixers, mills, calenders, extruders, tilt mixers, tire building, lubrication lubrication, introduction of a substance between the contact surfaces of moving parts to reduce friction and to dissipate heat. A lubricant may be oil, grease, graphite, or any substance—gas, liquid, semisolid, or solid—that permits free action of systems Soberay and Sons Ltd. Ron Soberay, President 12900 Lake Ave., #623 Lakewood, OH 44107 (216) 334-2003 Fax: (216) 334-2005 Website: www.soberayandsons.com Email: ron@soberayandsons.com Types of machinery: Used and rebuilt rubber and tire manufacturing machinery Technical Machine Products John Clark John Clark is the name of:
5500 Walworth Ave. Cleveland, OH 44102 (216) 281-9500 Fax: (216) 281-0408 Website: www.techmach.com Email: mail@techmach.com Types of machinery: Hydraulic vacuum presses, vacuum injection presses, compression presses, intensive mixers, mills U.S. Molding Machinery Zack Cohen cohen or kohen (Hebrew: “priest”) Jewish priest descended from Zadok (a descendant of Aaron), priest at the First Temple of Jerusalem. The biblical priesthood was hereditary and male. , President Bob Luck, V.P., Engineering Jerry Harper, Sales, Service, Operations 38294 Pelton Rd. Willoughby, OH 44094 (440) 918-1701 Fax: (440) 918-1720 Types of machinery: All types of rubber molding presses Vander-Kemp Division H.L. Kempler, Vice President 2461 Greenleaf Ave. Elk Grove Elk Grove can refer to:
(708) 864-8610 Fax: (708) 640-0431 Types of machinery: All types Videx Equipment John Hovey, President 170 Railroad railroad or railway, form of transportation most commonly consisting of steel rails, called tracks, on which freight cars, passenger cars, and other rolling stock are drawn by one locomotive or more. Ave. Paterson, NJ 07501 (201) 742-2381 Fax: (201) 742-1452 Email: jhovey@videx.com Types of machinery: Extruders, wire and cable Wayne Machine & Die Co. Janice Lischak 100 Furler St. Totowa, NJ 07512-1896 (973) 256-7374 Fax: (973) 256-1778 Website: www.waynemachine.com Email: info@waynemachine.com Types of machinery: Extruders West Coast Rubber Machinery George Schofhauser, President Bruce Bruce, Scottish royal family descended from an 11th-century Norman duke, Robert de Brus. He aided William I in his conquest of England (1066) and was given lands in England. F. Reichenfeld, Vice President Mark Pedersen, Sales Manager sales manager n → gerente m/f de ventas sales manager n → directeur commercial sales manager sale n → 7180 Scout Ave. Bell Gardens, CA 90201 (562) 927-2546 Fax: (562) 806-4628 Types of machinery: All types Xaloy New Castle Industries 1399 Countyline Rd. P.O. Box 7359 New Castle, PA 16107. (724) 656-5600 Fax: (724) 656-5620 Website: www.us.xaloy.com Email: freds@newcas.com Types of machinery: Extruders
Rebuilding in-house capabilities
The following grid lists the in-house rebuilding capabilities of
rebuilt machinery dealers in four major areas of rubber processing
machinery. The capabilities listed for each dealer are based on their
responses to a mail questionnaire. Several dealers indicated that they
did not have these capabilities but arrange for these services and were
not included in the grid.
Akron Akron Alsop
Special Steel Industrial
Machinery Fabricators Services
Mills/Calenders
Regrind rolls
Cut connecting gears
Replace bronze sleeve bearings *
Make low speed chain couplings *
Build motor starters *
Build mill bases * * *
Rebuild gear reducers * *
Install microprocessor controls * *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber
Rebuild gears * *
Heavy equipment handling * *
capability
Verify integrity of rebuilt * *
parts
Rebuild rotors and grind to * *
spec.
Welding capability-hardness * *
coating
Rebuild to original specs. * *
Install/design microprocessor * *
control
Extruders
Recut and profile feedscrews
Install new or replace pin * *
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque * *
to pin barrel technology
Rebuild transmission bearings, *
seals and gears
Apply hardness coating to screw
and/or feed section
Rebuild to latest designs and
technology
Install microprocessor controls * *
ASB E.H
Industries Barwell Benz
Mills/Calenders
Regrind rolls *
Cut connecting gears
Replace bronze sleeve bearings
Make low speed chain couplings
Build motor starters
Build mill bases
Rebuild gear reducers
Install microprocessor controls *
Presses
Remachine main cylinder *
Furnish hydraulic units *
Install microprocessor controls *
Rebuild the ram *
Rework bolster guides *
Build complete control panels
Rework the gland ring *
Install microprocessor control *
panels
Internal Mixers
Remachine mixing chamber
Rebuild gears
Heavy equipment handling
capability
Verify integrity of rebuilt
parts
Rebuild rotors and grind to
spec.
Welding capability-hardness
coating
Rebuild to original specs.
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews
Install new or replace pin
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, *
seals and gears
Apply hardness coating to screw
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls *
BRJ Commission Davey
Engineering Brokers Industries
Mills/Calenders
Regrind rolls
Cut connecting gears
Replace bronze sleeve bearings *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers *
Install microprocessor controls *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears
Heavy equipment handling *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews
Install new or replace pin
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings,
seals and gears
Apply hardness coating to screw
and/or feed section
Rebuild to latest designs and * *
technology
Install microprocessor controls *
Erie
Davis- Mill &
Standard Epco Press
Mills/Calenders
Regrind rolls *
Cut connecting gears *
Replace bronze sleeve bearings * *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers * *
Install microprocessor controls * *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling *
capability
Verify integrity of rebuilt
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews * *
Install new or replace pin * *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque * *
to pin barrel technology
Rebuild transmission bearings, * * *
seals and gears
Apply hardness coating to screw * *
and/or feed section
Rebuild to latest designs and * *
technology
Install microprocessor controls * *
Erie
Press Federal
Systems Farrel Equipment
Mills/Calenders
Regrind rolls *
Cut connecting gears
Replace bronze sleeve bearings *
Make low speed chain couplings
Build motor starters
Build mill bases *
Rebuild gear reducers *
Install microprocessor controls *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels *
Rework the gland ring * *
Install microprocessor control *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling * *
capability
Verify integrity of rebuilt * *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews *
Install new or replace pin
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, *
seals and gears
Apply hardness coating to screw
and/or feed section
Rebuild to latest designs and
technology
Install microprocessor controls
HF
Gomaplast Hancock Rubber
Machinery Engineering Machinery
Mills/Calenders
Regrind rolls *
Cut connecting gears
Replace bronze sleeve bearings * * *
Make low speed chain couplings *
Build motor starters *
Build mill bases * *
Rebuild gear reducers * * *
Install microprocessor controls * * *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber * *
Rebuild gears
Heavy equipment handling * *
capability
Verify integrity of rebuilt * * *
parts
Rebuild rotors and grind to * *
spec.
Welding capability-hardness * *
coating
Rebuild to original specs. * *
Install/design microprocessor * *
control
Extruders
Recut and profile feedscrews * *
Install new or replace pin *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, * * *
seals and gears
Apply hardness coating to screw * *
and/or feed section
Rebuild to latest designs and * * *
technology
Install microprocessor controls * *
Hudson Hunter Icon
Machinery Hydraulics Industries
Mills/Calenders
Regrind rolls
Cut connecting gears
Replace bronze sleeve bearings
Make low speed chain couplings
Build motor starters
Build mill bases
Rebuild gear reducers
Install microprocessor controls
Presses
Remachine main cylinder
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber
Rebuild gears
Heavy equipment handling
capability
Verify integrity of rebuilt
parts
Rebuild rotors and grind to
spec.
Welding capability-hardness
coating
Rebuild to original specs.
Install/design microprocessor
control
Extruders
Recut and profile feedscrews
Install new or replace pin
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings,
seals and gears
Apply hardness coating to screw
and/or feed section
Rebuild to latest designs and
technology
Install microprocessor controls *
Jarvis JM Karder
Industries Machinery Rubber
Mills/Calenders
Regrind rolls * *
Cut connecting gears * *
Replace bronze sleeve bearings * *
Make low speed chain couplings * *
Build motor starters * *
Build mill bases * *
Rebuild gear reducers * *
Install microprocessor controls * *
Presses
Remachine main cylinder * *
Furnish hydraulic units * *
Install microprocessor controls * * *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels * * *
Rework the gland ring * *
Install microprocessor control * * *
panels
Internal Mixers
Remachine mixing chamber * *
Rebuild gears * *
Heavy equipment handling * *
capability
Verify integrity of rebuilt * *
parts
Rebuild rotors and grind to * *
spec.
Welding capability-hardness * *
coating
Rebuild to original specs. * *
Install/design microprocessor * *
control
Extruders
Recut and profile feedscrews *
Install new or replace pin *
barrel mixing pins
Redesign screw to fit customer *
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw * *
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls *
Kobelco
Klockner Stewart Machinery
Desma Bolling Exchange
Mills/Calenders
Regrind rolls * *
Cut connecting gears *
Replace bronze sleeve bearings * *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers * *
Install microprocessor controls *
Presses
Remachine main cylinder * *
Furnish hydraulic units * * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber * *
Rebuild gears *
Heavy equipment handling * *
capability
Verify integrity of rebuilt * *
parts
Rebuild rotors and grind to * *
spec.
Welding capability-hardness * *
coating
Rebuild to original specs. * *
Install/design microprocessor * *
control
Extruders
Recut and profile feedscrews *
Install new or replace pin *
barrel mixing pins
Redesign screw to fit customer *
needs
Convert drive and gear torque *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw *
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls *
NFM
Mackey Iddon
Bowley M.I.R. Limited
Mills/Calenders
Regrind rolls *
Cut connecting gears
Replace bronze sleeve bearings * *
Make low speed chain couplings
Build motor starters *
Build mill bases * *
Rebuild gear reducers * *
Install microprocessor controls *
Presses
Remachine main cylinder * *
Furnish hydraulic units *
Install microprocessor controls *
Rebuild the ram * *
Rework bolster guides *
Build complete control panels *
Rework the gland ring * *
Install microprocessor control *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor
control
Extruders
Recut and profile feedscrews * *
Install new or replace pin * *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw * *
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls *
NFM OEM
Welding Northeast Press
Engineers Millwright Systems
Mills/Calenders
Regrind rolls * *
Cut connecting gears * *
Replace bronze sleeve bearings * *
Make low speed chain couplings *
Build motor starters *
Build mill bases * *
Rebuild gear reducers * *
Install microprocessor controls * *
Presses
Remachine main cylinder *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling * *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to * *
spec.
Welding capability-hardness * *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews * *
Install new or replace pin * *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque * *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw * *
and/or feed section
Rebuild to latest designs and * *
technology
Install microprocessor controls * *
Reliable
RAK Rubber & Rogers
Machine Plastic Industrial
Mills/Calenders
Regrind rolls *
Cut connecting gears *
Replace bronze sleeve bearings * *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers * *
Install microprocessor controls *
Presses
Remachine main cylinder * * *
Furnish hydraulic units * *
Install microprocessor controls * *
Rebuild the ram * * *
Rework bolster guides * *
Build complete control panels * *
Rework the gland ring * * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling * *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor * *
control
Extruders
Recut and profile feedscrews *
Install new or replace pin * *
barrel mixing pins
Redesign screw to fit customer *
needs
Convert drive and gear torque *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw *
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls *
Rubber
City
Products Machinery Rutil
Mills/Calenders
Regrind rolls *
Cut connecting gears *
Replace bronze sleeve bearings *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers *
Install microprocessor controls *
Presses
Remachine main cylinder * * *
Furnish hydraulic units * * *
Install microprocessor controls * * *
Rebuild the ram * * *
Rework bolster guides * * *
Build complete control panels * * *
Rework the gland ring * * *
Install microprocessor control * * *
panels
Internal Mixers
Remachine mixing chamber
Rebuild gears
Heavy equipment handling
capability
Verify integrity of rebuilt
parts
Rebuild rotors and grind to
spec.
Welding capability-hardness
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews
Install new or replace pin *
barrel mixing pins
Redesign screw to fit customer *
needs
Convert drive and gear torque *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw *
and/or feed section
Rebuild to latest designs and *
technology
Install microprocessor controls * * *
SME
Scantland Skinner Equipment
Industries Engine LLC
Mills/Calenders
Regrind rolls *
Cut connecting gears *
Replace bronze sleeve bearings * *
Make low speed chain couplings *
Build motor starters *
Build mill bases * *
Rebuild gear reducers * *
Install microprocessor controls *
Presses
Remachine main cylinder *
Furnish hydraulic units *
Install microprocessor controls *
Rebuild the ram *
Rework bolster guides *
Build complete control panels *
Rework the gland ring *
Install microprocessor control *
panels
Internal Mixers
Remachine mixing chamber * * *
Rebuild gears * * *
Heavy equipment handling * * *
capability
Verify integrity of rebuilt * * *
parts
Rebuild rotors and grind to * * *
spec.
Welding capability-hardness * * *
coating
Rebuild to original specs. * * *
Install/design microprocessor * * *
control
Extruders
Recut and profile feedscrews *
Install new or replace pin * * *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque *
to pin barrel technology
Rebuild transmission bearings, * *
seals and gears
Apply hardness coating to screw * * *
and/or feed section
Rebuild to latest designs and * *
technology
Install microprocessor controls *
Soberay Technical U.S.
and Sons Machine Molding
Ltd. Prod. Machinery
Mills/Calenders
Regrind rolls
Cut connecting gears *
Replace bronze sleeve bearings *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers *
Install microprocessor controls *
Presses
Remachine main cylinder *
Furnish hydraulic units * * *
Install microprocessor controls * *
Rebuild the ram * *
Rework bolster guides * * *
Build complete control panels * *
Rework the gland ring * *
Install microprocessor control * *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling * *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews
Install new or replace pin
barrel mixing pins
Redesign screw to fit customer
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, *
seals and gears
Apply hardness coating to screw *
and/or feed section
Rebuild to latest designs and
technology
Install microprocessor controls
Wayne West
Vander Videx Machine Coast
Kemp Equipment & Die Rubber
Mills/Calenders
Regrind rolls * *
Cut connecting gears *
Replace bronze sleeve bearings *
Make low speed chain couplings *
Build motor starters *
Build mill bases *
Rebuild gear reducers *
Install microprocessor controls *
Presses
Remachine main cylinder *
Furnish hydraulic units *
Install microprocessor controls *
Rebuild the ram *
Rework bolster guides *
Build complete control panels *
Rework the gland ring *
Install microprocessor control *
panels
Internal Mixers
Remachine mixing chamber *
Rebuild gears *
Heavy equipment handling *
capability
Verify integrity of rebuilt *
parts
Rebuild rotors and grind to *
spec.
Welding capability-hardness *
coating
Rebuild to original specs. *
Install/design microprocessor *
control
Extruders
Recut and profile feedscrews * * *
Install new or replace pin * * *
barrel mixing pins
Redesign screw to fit customer * *
needs
Convert drive and gear torque
to pin barrel technology
Rebuild transmission bearings, * * *
seals and gears
Apply hardness coating to screw * * *
and/or feed section
Rebuild to latest designs and * *
technology
Install microprocessor controls *
|
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion