Updated hybrid modeler makes changes easier. (CAD).Morphing surfaces of an entire model and direct editing of a single face of a solid are some of the enhanced capabilities of new PowerShape Version 5 solid- and surface-modeling software from Delcam Inc., Windsor, Ont. The new morphing feature (see photos) lets you stretch, twist, or reshape whole areas of a solid without disconnecting the faces. This allows for styling changes in a single operation without extensive modification of separate design elements. You can draw a new line to replace an existing edge, or they can define an area to be changed. The software automatically smooths out transitions across the surfaces. The face-editing feature has been improved so that surface-modeling commands can be used directly on a single face within a solid, without having to break the solid into component surfaces. The software reintegrates the modified face with the solid, making styling changes easier to execute. 3D sketching sketch n. 1. A hasty or undetailed drawing or painting often made as a preliminary study. 2. A brief general account or presentation; an outline. 3. a. capability has been improved to establish an associative as·so·ci·a·tive adj. 1. Of, characterized by, resulting from, or causing association. 2. Mathematics Independent of the grouping of elements. link between a sketch and a surface. When a sketch is added to a surface of a model, or if the model surface containing a sketched detail is changed, the geometries between the sketch and surface will remain linked. Once the sketch is complete, the resulting wire-frame data uses its associativity (programming) associativity - The property of an operator that says whether a sequence of three or more expressions combined by the operator will be evaluated from left to right (left associative) or right to left (right associative). to interrogate (1) To search, sum or count records in a file. See query. (2) To test the condition or status of a terminal or computer system. the underlying surface data when creating run-off and draft surfaces, etc. Data management and tracing have also been improved, allowing for user-defined procedures such as updating the model file name each time the model is replaced in the data vault vault, ceiling over a room, formed in any one of a variety of curved shapes. Nature of Vaults A vault is generally composed of separate units of material, such as bricks, tiles, or blocks of stone, so shaped or cut that when assembled they form a . The software can issue a system warning when a user attempts to replace a model in the vault "In the Vault" is a short story by American horror fiction writer H.P. Lovecraft, written on September 18, 1925 and first published in the November 1925 issue of the amateur press journal Tryout. currently in use by another user. Tel: (519) 974-8088, www.delcam.com |
|
||||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion