Upacting press.The company's LoBoy upacting press is highlighted in this two-page, four-color bulletin. The LoBoy upacting compression molding Compression molding is a method of molding in which the molding material, generally preheated, is first placed in an open, heated mold cavity. The mold is closed with a top force or plug member, pressure is applied to force the material into contact with all mold areas, and heat press is said to deliver high tonnage and low deflection in an easy-to-accommodate footprint and worker friendly height. The LoBoy has 452 tons of clamping pressure provided by 2,000 psi. It is said to be ergonomically designed to a 32" openpress working height. The press requires no pit, so it can be placed anywhere in a plant and easily relocated, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the company. The LoBoy yields only .001" deflection per foot span on a 24" x 24" pressing surface. The headblocks and water cooled Refers to a cooling system that uses water. Similar to a car, systems for electronics circulate water in a loop, through a cooling radiator, to all of the heat sources. In personal computers, the hottest devices are the CPU chip and GPU chip (the processor on the display adapter). platens are 35% thicker than those found on typical presses. In addition to superior flatness and parallelism An overlapping of processing, input/output (I/O) or both. 1. parallelism - parallel processing. 2. (parallel) parallelism - The maximum number of independent subtasks in a given task at a given point in its execution. E.g. , it is said to provide exceptional rigidity and lasting performance. The advanced analytical design is said to assure that the press delivers the loaded deflections required. Studies are said to prove that users experience significantly lower rejected parts as a result. The platen A long, thin cylinder in a typewriter or printer that guides the paper through it and serves as a backstop for the printing mechanism to bang into. It is typically made of a hard rubber or rubber-like material. See carriage and typewriter. guidance system is an exclusive design, featuring hardened wear strips on side plates which give the LoBoy extended life and deliver smooth operation with minimal maintenance, according to the literature. French Oil Mill Machinery www.frenchoil.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion