Ultrasonic imaging finds voids, cracks and bonding defects.* As material costs climb, acoustic micro-imaging (AMI) is increasingly being used for non-destructive inspection and quality control of microelectronic components and assemblies, adhesive and welded bonds, solid part walls, and other applications where bond integrity, cracking, or voids are an issue. AMI analyzes the passage of ultra-high-frequency pulses of ultrasound through a material, which can reveal the presence of internal defects. Voids, cracks, and delaminations are usually associated with air gaps that reflect ultrasound at frequencies of 10 to 300 MHz (MegaHertZ) One million cycles per second. It is used to measure the transmission speed of electronic devices, including channels, buses and the computer's internal clock. A one-megahertz clock (1 MHz) means some number of bits (16, 32, 64, etc. rather than allowing its further transmission. Plastics processors are making greater use of AMI due to the higher cost of materials and greater focus on quality improvement. "Companies don't want to waste parts and they want to confirm that their process can manufacture good parts," says Steve Martell, manager of technical support services support services Psychology Non-health care-related ancillary services–eg, transportation, financial aid, support groups, homemaker services, respite services, and other services for Sonoscan Inc., which reportedly invented AMI technology in 1973 and makes inspection systems for laboratory and production use. Picture this bond Determining the bond integrity between molded plastics and other materials has always been a difficult task for processors. Companies have traditionally relied on cutting a cross-section of the part in order to confirm the bond interface of glued, overmolded, or welded products. This destructive process is time consuming, and it is difficult to extrapolate extrapolate - extrapolation the data from testing a small number of parts to the overall production process, says Tom Adams “Tom Adams” redirects here. For other people known as Tom Adams, see Tom Adams (disambiguation). Tom Adams (born 1926) is an illustrator most famous for his Agatha Christie paperback cover designs. , a consultant with Sonoscan. The benefits of AMI are its non-destructiveness and speed. It can take as little as 5 sec to scan a small part. The C-SAM C-SAM C-Mode Scanning Acoustic Microscope C-SAM Commerce for Secure Active Mobile , or C-Mode Scanning Acoustic Microscope  This article or section is in need of attention from an expert on the subject.Please help recruit one or [ improve this article] yourself. See the talk page for details. , is an ultra-high-frequency ultrasonic imaging system that looks inside opaque samples and reveals internal features such as defects and construction details. The system utilizes an ultrasonic transducer transducer, device that accepts an input of energy in one form and produces an output of energy in some other form, with a known, fixed relationship between the input and output. that scans the part. Since high-frequency ultrasound does not travel through air, a coupling fluid such as deionized water is used to deliver the ultrasound pulse from the transducer lens to the part surface. The transducer acts as both sender and receiver. A very short acoustic pulse enters the sample and return echoes from interfaces within the part are received at a rate of several thousand times per second. The return times are a function of the distance from the interface to the transducer and the material's acoustic properties. An oscilloscope oscilloscope (əsĭl`əskōp'), electronic device used to produce visual displays corresponding to electrical signals. Displays of such nonelectrical phenomena as the variations of a sound's intensity can be made if the phenomena are display of the echo pattern echo pattern, n a pattern of recurring illness resulting from unresolved imbalances in the patient's diet, energy, and stress levels. , known as an A-Scan, shows defects as areas of higher contrast in the image. An electronic gate "opens" for a defined duration, allowing only the information from a specific interface within the part to be imaged while excluding all other echoes. Completed C-SAM images of the internal structure of a sample are produced in about 10 sec. AMI can be used on parts as large as 18 x 24 ft. A high-resolution scan of large parts can take more than 10 min. Precise detection The ultrasonic frequency determines the resolution with which defects can be detected. Generally, a higher frequency means a smaller wavelength and consequently a higher resolution. At 200 MHz, a 10micron-wide defect can be detected, while at 100 MHz a 25-micron-wide fault is detectable. However, a transducer can actually detect defects an order of magnitude A change in quantity or volume as measured by the decimal point. For example, from tens to hundreds is one order of magnitude. Tens to thousands is two orders of magnitude; tens to millions is three orders of magnitude, etc. smaller than its resolution limit but not produce a resolvable image, says Martell. AMI is used extensively in microelectronics where silicon chips are bonded to a plastic substrate. In those applications, AMI is incorporated in-line in the manufacturing process. Sonoscan also sees growing penetration in biomedical bi·o·med·i·cal adj. 1. Of or relating to biomedicine. 2. Of, relating to, or involving biological, medical, and physical sciences. applications such as injection molded cartridges. AMI can verify bonds for most plastic materials except fiberglass composites. Acoustic imaging has limitations with high-glass-content materials because of its sensitivity to air gaps. Sonoscan's AMI inspection system is suitable for R&D, prototyping, manufacturing QC, and failure analysis. The company's hardware and software packages range from $175,000 for the base model up to $250,000 with options. Part testing is also offered as a laboratory service in the U.S., Europe, and Far East. NEED TO KNOW MORE? For more information on this company and its products, visit www.ptonline.com/suppliers. Sonoscan Inc., Elk Grove Village Elk Grove Village, village (1990 pop. 33,429), Cook and Du Page counties, NE Ill., a suburb of Chicago; inc. 1956. With a population of c.100 at the time of its establishment on open farmland, the village has grown dramatically and steadily, largely because of its , Ill. (847) 437-6400 * www.sonoscan.com |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion