Ultimate gas impingement AR KAC SR-15E3 IWS SBR Carbine: you may have thought that a rifle from Knight's Armament would be out of your price range, but Kokalis says that, while they aren't cheap, the features are worth it.
Not so well known is the fact that they also manufacture what is arguably the most technologically advanced series of 5.56x45mm NATO, direct-impingement gas-operated, rifles in the world. Although all are based upon the late Eugene Stoner's AR-15 design, the innovations found on the KAC SR-15 ("SR" obviously standing for Stoner Rifle) series are nothing short of impressive, and significantly beyond anything encountered in competing product line's using this system of operation.
I assembled the rifle used in this test and evaluation in the following manner. I first purchased a KAC (Product Number.30355) SR-15E3 SBR (Short Barrel Rifle) Car, bine upper receiver assembly with a 14.5-inch dimpled barrel (manufacturer's suggested retail price $1,875) to which I then permanently attached a KAC MAMS Muzzle Brake by pinning and welding to make it BATFE-compliant with a barrel length of 16 inches.
After that, I purchased a (KAC Product Number 25780) SR-15 IWS lower receiver assembly (manufacturer's suggested retail price $750). The result was a semiautomatic-only KAC SR-15E3 IWS SBR Carbine with a 16-inch barrel.
But before we examine this unique weapon with closer scrutiny, let's take a look at the history of what has become one of the most important military small arms manufacturers in the United States.
More than 30 years ago; C. Reed Knight, Jr., founded Knight's Armament Company as a research and development facility It has subsequently evolved into a truly premier manufacturing operation that offers complete weapons systems, sound suppression devices, night vision electro-optics and modular accessories for small arms. KAC is justifiably recognized for advanced developments in small arms designs, components and accessories, with research and development, manufacturing, assembly and prototype/product testing all performed at the current facility in Titusville, Fla.
In 1982, 'Knight founded KAC in Vero Beach, Florida to focus on products that met the very specialized requirements of the Special Forces community. KAC is currently one of the largest small arms manufacturers in the United States.
With the active collaboration of the late Eugene Stoner, KAC has designed some of the most innovative modern small arms systems ever conceived. From Reed Knight's first endeavors in sound suppression, to his collaborations that produced a number of weapons systems including the SR-15 series, the development of KAC's patented rail system and night vision electro-optics, Knight's Armament Company has consistently pioneered the manufacture of innovative and trend-setting small arms and accessories.
The first landmark products to originate at KAC came during the 1984 to 1989 time frame with the introduction of the 9mm snap-on sound suppressor, the first "LEGO kits," which included the forerunner of the RIS/RAS and URX rail systems, and with input from Eugene Stoner, the development of the All American 2000 pistol (sold to Colt) and the SR-25 precision rifle platform.
During the early 1990s, when Eugene Stoner officially joined the KAC team, the first tests of Knight Vision electro-optics commenced. The adoption of the M4 Carbine occurred in 1994, together with USSOCOM's adoption of Knight's Rail Interface System (RIS) and the first SR25 rifle contract by the U.S. military.
The new millennium saw the US Navy's adoption of the Mk11 Mod0 (their designation of the SR-25), followed in 2002 by the transfer of KAC's facilities from Vero Beach to a 450,000 square feet building complex inTitusville, Fla.
Between 2003 and 2005, several of KAC's most impressive products were introduced, commencing with the Universal Rail Extending (URX) free-floating rail system. This was followed shortly thereafter by the U.S. Army's acquisition. of Knight Vision's UNS (Universal Night Scope), and the subsequent adoption of the M110 SASS from the XM110 program, which was awarded to KAC in 2004.
Knight's maintained this pace of high quality innovation by releasing the PDW (Personal Defense Weapon) in 2006. The PDW platform was built around a proprietary 6x35mm cartridge, developed in-house for specific applications within the special operations arena.
In recent years, KAC has continued its mastery of quality innovation with products such as their "Ball Mill Lightened," or "Dimpled" barrels, Carbon Cutter Bolt Carriers, the Pressure Reduction System, Integrated Sights, and Ambidextrous Controls.
Products like their Micro Iron Sights, 450 Offset Iron Sights and Optics Mounts, and slick-sided URX III and URX 3.1 continue the KAC tradition of effective and innovative products designed around the real-world needs of professional end users.
The year 2012 saw the introduction of eight new weapons for the commercial and law enforcement markets, divided by caliber and application. These new weapons are equipped with the latest KAC technology, backed by decades of battlefield experience.
KAC SR-15E3 IWS SBR Carbine
The 5.56x45mm NATO SR-15E3 IWS * SBR Carbine used in SGN's test and evaluation is equipped with several of KAC's latest proprietary features. The major features of this rifle include the URX 3.1 rail system, a hammer-forged, chrome-lined barrel, the innovative E3 bolt group, ambidextrous controls, a two-stage match-grade trigger mechanism and the optional MAMS muzzle brake.
As described above, the barrel's non-NFA overall barrel length of 16 inches (406mm) was in this case achieved by permanehtly pinning the optional MAMS muzzle brake onto a 14.5-inch barrel. When supplied with a full-length 16-inch barrel and M16A2 flash suppressor, the barrel length becomes 17 inches (432mm).
The dimpled medium profile barrel has six grooves with a 1:7 right-hand twist and is thus best utilized with the heaviest 5.56mm projectiles. The rifle's overall length is 33 inches (838mm) with the four-position, retractable stock fully collapsed and 36 inches (914mm) with the stock fully extended. The weight, empty, is only 6.6 pounds (3kg).
The rifle furnished to SGN has a hard coat black anodized finish, but dark earth is available as an option at slightly greater cost. KAC's URX 3.1 rail system is a lightweight, free-floating, continuous-top rail system with MIL-STD-1913 rail interfaces.
It was specifically designed to provide operators with the most diverse number of placement options for accessories possible. To relieve all pressure, contact and stress from the barrel that might adversely affect the barrel's harmonics, the URX system was designed to be free-floating. Except at the point of attachment to the receiver, the barrel is not in contact with the rail system. As a consequence, accessories mounted on the URX or their manipulation cannot affect the barrel's accuracy potential.
The URX 3.1 rail system features a flat, continuous rail at 12 o'clock, several inches of rails at the forward and aft of the 3, 6 and 9 o'clock locations, and slick-sided areas in the middle sections (except where specialized, textured hand gripping panels are attached). By eliminating areas of the Tail that are commonly unused, the slide sides offer a slimmer diameter for gripping, as well as an overall reduction in weight.
The integrated hand stop panel designed for attachment to the URX rail system at the 6 o'clock position was designed to accommodate the extended support handgrip now-so frequently employed by tactical shooters and many special operations military personnel.
This gripping method involves placing the support hand at the far forward end of the rail system with the index finger extended and with the other fingers wrapped around the rail system. There is, in addition, a rubbery, 1.75-inch thumb stop that snaps onto the front end of the 12 o'clock MIL-STD-1913 rail to further enhance this type of firing grip.
With the elbows tucked in and the support arm completely extended, this firing position creates an isosceles triangle, which supposedly slightly mitigates the recoil impulse, increases the speed of lateral movement when necessary and improving overall control in CQB scenarios.
A number of special operations shooters, and others well known in tactical circles, such as Kyle Defoor, Jason Falla, Larry Vickers and Kyle Lamb, have jumped on this bandwagon. However, the jury is still out on this technique and many, including myself, disagree.
But I intend to continue experimenting with this technique using the KAC SR-15E3 IWS SBR Carbine as a platform. The KAC Deluxe Panel Kit (KAC Product Number 30409-BLK) sells for $85.94 and allows you to set up the SR-15E3 IWS SBR Carbine for either the isosceles shooting grip or a more conventional configuration.
KAC has removed the integrated, backup iron sights found at the 12 o'clock position on earlier URX rail systems. Many operators were almost entirely utilizing optics only. To resolve this issue, KAC developed its now famous 45[degrees] Offset Backup Iron Sights (BUIS).
KAC's 45[degrees] Offset Rail Mounted Micro Folding Sights provide operators with an important advantage in rapid target acquisition over a 12 o'clock BUIS system. In addition, they are instantly available if the optic sight fails. They are of the same type as KAC's fully adjustable Micro Flip Sights designed for 12 o'clock mounting, but are attached to a low-profile arm that interfaces with MIL-STD-1913 rail systems and cants the sights at a 450 angle.
Both the front and rear sights fold down to a low-profile configuration that in conjunction with the arm that rests in the rail recesses, provides an exceptionally lightweight and unobtrusive BUIS system. The sights provide the operator with an entirely different line-of-sight than the optical sight mounted at 12 o'clock.
As a consequence, just a quick twist of the rifle permits instant access to them. They're especially valuable for rifles equipped with medium to long-range optical sights, as they provide the instant capability to engage unexpected close-range targets. If the optical sight fails, they can be used to engage a target immediately without removal of the optical sight.
The rear sight is a large aperture type adjustable for elevation in 100-meter increments from 200 to 600 meters. A knob on the sight's right side permits windage adjustments. The front sight is a, thin post with protective ears than can _be adjusted for elevation .zero. This excellent optional accessory sells for $281.25.
KAC uses a hammer-forging process on their 5.56x45mm barrels and chambers, which increases the quality of the interior finish; in addition to increasing the durability and life of the barrel. After the interior of a drilled barrel has been honed to a fine, clean finish, the barrel is placed over a mandrel and hammered into form.
The barrels are subsequently heat-treated to relieve the stress induced during hammer-forging. The barrels and chambers are chrome-lined after hammer-forging both to increase barrel life and resistance to fouling and corrosion. Chrome is approximately twice as hard as standard 4150 CMV steel and also impedes the lead and powder fouling that bare steel can sometimes absorb into its pores.
Chrome lining protects the barrel from the high temperatures encountered when sustained full-auto bursts are employed and thus substantially increases barrel life while maintaining the barrel's accuracy potential and the entire system's durability and reliability.
KAC has pioneered an exceptionally innovative and effective means for reducing both weight and stress, while at the same time dissipating heat in its barrels. These so-called "Ball Mill Lightened Barrels" use a pattern of dimpling (rows of offset spheres) to increase the surface area and significantly enhance cooling over that achieved by either a standard or fluted barrel.
The stress inherently created by this dimpling process is relieved by. adjacent rows of dimpling. From an engineering perspective, any barrel with this type of alteration will produce a yaw deviation when fired. However, KAC's dimpling pattern substantially reduces this undesired side effect, reducing the point-of-impact shift through a thermal cycle.
Attached to the barrel by both pinning and welding is the new KAC MAMS (Multi-Axis Muzzle Stability) Brake, which came out of recoil management studies, conducted in cooperation with the U.S. Government. The MAMS Brake reduces the perceived impulse recoil by up to 60% and constitutes a truly neutral bias system.
The MAMS Brake is designed to diffuse high-pressure muzzle gases, which serves to increase the rifle's accuracy potential and controllability, both extremely important in CQB scenarios. The MAMS has a pin projecting at 12 o'clock at its rear for indexing with and securing KAC's QDC soundsuppressors. The fins extending from the front of the MAMS Brake reduce the first round flash signature by up to 99% when compared to conventional types. In summary, the MAMS Brake increases weapon controllability, reduces the flash signature and perceived recoil impulse, while providing a neutral bias with sound suppressor compatibility. At the time of this writing a price for the optional MAMS Brake has not yet been decided.
All of KAC's rifles come equipped with a two-stage, match-grade trigger system with a guaranteed 4.5-pound trigger pull weight. The trigger pull weight on the rifle sent to us for test and evaluation was a very clean 4.25 pounds. During the first stage of the trigger pull, very little resistance is felt. When the second stage is in encountered, a maximum pull of no more than 4.5 pounds is required for let-off. Two-stage triggers are a tradition associated with America's history as a nation of riflemen. The trigger guard can be rotated down for use with thick arctic gloves by removal of a small roll pin.
The controls on KAC rifles are ambidextrous. That is, truly ambidextrous as many manufacturers claim ambidextrous controls, but in reality they are not. The SR-15E3 IWS Mod 1 Carbine's selector lever and magazine catch/release On each side are mirror images.
The bolt release levers are identical, but placed vertically on the left side and horizontally on the right side. The selector lever on the right side is scalloped to provide a lower profile on the usually non-operating side of the receiver to prevent interference between the lever and the operator's glove or hand.
One of the KAC SR-15E3 IWS SBR Carbine's most important and unique features is the E3 Enhanced Bolt. This proprietary component was. specifically designed for SR 15 and 16 models. Its very special features include an enlarged lug pattern, rounded lugs, reduced cam pin (to accommodate the thicker web around the cam pin hole), dual-spring extractor and unique firing pin design.
The KAC E3 Enhanced Bolt has an enlarged lug pattern that provides more positive engagement when in battery and its rounded lugs minimize chipping and cracking. This strengthened design increases bolt life and ensures correct seating in the battery position.
The E3 bolt's extractor achieves total reliability in an area that has plagued the M16 system since its inception, Shaped like a rounded "T" and sometimes referred to as a "butterfly" configuration, the extractor's pivot point has been shifted forward to better balance the extractor and apply constant pressure on the cartridge case's extractor groove to substantially reduce the once common failure-to-extract malfunction.
Another unique feature is the use of two full-size extractor springs instead of the conventional micro spring. This not only reduces spring compression while the extractor is in motion, but provides a failsafe if one spring loses compression strength, as the rifle will continue to function normally.
The E3 Enhanced Bolt has a thinner cam pin and a firing pin of reduced overall size. The thinner cam pin permits a thicker bolt web, which is a frequent point of failure on AR bolts. The scaled-down firing pin was designed to accommodate the thinner can pin.
The full potential of the KAC E3 Enhanced Bolt is especially realized during sustained full-auto firing sequences. Its enhancements* result in significantly increased durability and service life. This is quite simply the best AR bolt available.
The SR-15E3 IWS SBR Carbine comes equipped with a black, four-position Lewis Machine & Tool (LMT) SOPMOD buttstock. The SOPMOD buttstock was originally developed by NSWC-Crane for the M4A1 carbine.
This stock features sloped sides for an improved cheek weld, as well as waterproof battery storage compartments and a thick, checkered, synthetic rubber butt pad. I don't carry batteries in buttstocks of this type, as they only serve to further increase the weight of already overloaded rifle systems.
But there's no doubt that these battery compartments widen the top of the stock and significantly improve the cheek weld. The SR-15E3 IWS SBR Carbine also comes equipped with an LMT forged charging handle with tactical latch.
The M16A2-type black polymer pistol grip has deep longitudinal grooves along its rear face. There's a finger swell 1 inch below the trigger guard on the grip's front face and an anti-slip protrusion at the base of the grip.
For insertion into the SR-15E3's flared magazine well, a 30-round, two-position-feed, staggered-column GI magazine manufactured by Eddie Okay industries, Inc. in New Britain, Connecticut was included. However, KAC's white polymer, anti-tilt follower was installed. A magazine safety insert was also provided.
Two pushbutton (aka QD or snap-in) sling swivel attachments came with the SR-15E3 and there are ambidextrous holes to snap them into on the SOPMOD buttstock and at three places on each side of the upper and lower receivers.
Our test and evaluation of the KAC SR-15E3 IWS SBR Carbine provided us with an opportunity to use an interesting new tool for Direct Gas Impingement M16/AR-15-type rifles. The CRT-15 Carbon Removal tool is manufactured by the Magna-Matic Defense division of Magna-Matic Corporation (Dept. SON, W4599 County Road IW, Waldo, WI 53093; phone: 920-564-2366 or 800-328-1110; fax: 920-564-2368; email: email@example.com; website: www.magna-matic-defense.com). Zinc-plated, the CRT-15 not only removes carbon fouling from the bolt carrier but from the tail of the bolt as well. This useful armorer's tool sells for $39.99.
Because of the cost of the commercial version of KAC's M110 sniper weapon system, some believe that KAC's law enforcement and civilian semiautomatic-only rifles and carbines are expensive. KAC's manufacturing facility was established to meet the U.S. Government's rigid standards for the 'production of MilSpec products used by our nation's war fighters. All of KAC's weapons are manufactured using the same standards, which include almost unending inspections and stringent quality control specifications of the highest possible level.
The SR-15E3 IWS SBR Carbine used in the SHOTGUN NEWS test and evaluation was built to the same standards as the U.S. military's M110 sniper weapon system. When you add up features such as the URX 3.1 rail system, a hammer forged, chrome-lined, Ball Mill Lightened barrel, the innovative E3 bolt group, ambidextrous controls, a two-stage match-grade trigger mechanism, LMT SOPMOD buttstock and tactical latch retracting handle and the optional MAMS muzzle brake, the manufacturer's suggested total retail price of $2,625 is actually more than reasonable.
This is the finest quality, most exceptional direct gas impingement AR-15-type rifle I have ever tested, bar none--really hot ticket and absolutely recommended without reservations of any kind.
Optics for the KAC SR-15E3 IWS SBR Carbine
Selecting an optical sight for a caliber 5.56x45mm NATO tactical rifle of this. type presents a dilemma of no small consequence. For actual tactical deployment in an urban operational area with a relatively short-barreled rifle, a scope with a magnification range of 1X to no more than 4X is clearly indicated. However, it's impossible to determine the rifle's real accuracy potential with magnification that low. As a result, we selected two scopes, one for tactical deployment and one to test the rifle's accuracy potential.
Leupold & Stevens, Inc. (Dept. SGN, P.O. Box 688, Beaverton, Oregon 97075-0688, phone: 503-646-9171; fax: 503-526-1475; website: www.leupold.com) has been making riflescopes for 102 years. Their product line includes optical sights that cover hunting, target shooting and tactical applications. They sell more tactical scopes to the U.S. government than all other scope manufacturers combined.
There are several reasons for that. Most of their rifle scopes, and every component thereof, are made entirely in the United States. Equally important, the quality and optical features of their scopes are outstanding. I selected the Leupold Mark 4 8.5-25x5Omm LR/T M5 Illuminated Reticle Riflescope with their relatively new and innovative Tactical Milling Reticle. .
Overall length of this scope is only 14.4 inches (365.76mm) with a weight of just 22.5 ounces (638 grams), which is quite incredible for a tactical scope with a three times magnification range from 8.5X to 25X. The tube diameter of the scope is 30mm. A 30mm tube with its thicker walls has considerably more cross-sectional area inside the tube than most 1-inch tubes with their thinner walls. Once this additional area is available, the erector tube inside the scope body (which carries all lenses except the ocular and objective lenses) and its lenses can be increased in size to transmit more light and thus yield greater resolution and a brighter image. Furthermore, a heavy 30mm housing is more shock-resistant than any 1-inch tube.
The eye relief, an extremely important factor in assessing the operator's ability to quickly come on target is 3.7 to 5.3 inches, which is really excellent, as high magnification scopes all too often have such a narrow range of eye relief that it's difficult to acquire the target at the highest power settings.
The field of view at 100 yards is 4.4 feet at 25X magnification and 11.2 yards at 8.5X magnification. Leupold's Xtended Twilight Lens System optimizes the transmission of low-light wavelengths, so you can see the details of low-light scenes in greater, brighter detail than most other scopes. The image is sharp and brilliant.
In my opinion, this is one of Leupold's finest tactical scopes with an ideal magnification range for battlefield applications at longer ranges. The manufacturer's suggested retail price is $1,999.99 with the Tactical Milling Reticle pattern. Leupold 30mm, aluminum alloy, high rings (#57291) cost $224 and their really great aluminum alloy, flip-up lens caps sell for $132. I prefer totally opaque lens covers because they force the operator to flip them up, as the see-through types always degrade the scope's optical qualities.
Scopes in Leupold M5 series have both windage and elevation adjustment knobs that feature audible and tactile feedback from half-minute and one-minute numbered divisions with 0.1-minute MIL-click-stops clearly marked between each one-minute division. The ability to make one-tenth-minute adjustments is an important attribute. Total elevation travel on this scope is 75 moa, and the windage adjustment is 70 minutes and each complete revolution raises or lowers the point of impact by 5 minutes.
The elevation knob also has a horizontal scale that is used to keep track of the number of revolutions that the dial has been turned. In addition, there is a built-in anti-backlash system that guarantees repeatable accuracy from click to click, and back again.
Most snipers use an elevation adjustment system such as this by zeroing the rifle and scope at specific ranges and writing the elevation adjustment settings on a range card attached to the rifle's buttstock. The setting to which the elevation adjustment knob must be rotated for a specific distance is usually referred to as a "come up" by those who move in this elite loop. Leupold's Mark 4 M3 scopes have half-minute adjustment. increments. This is too coarse, in my opinion, for really long range shooting. Remember, 1 moa is the equivalent of 10 inches at 1,000 yards.
This Leupold Mark 4 8.5-25x50mm LR/T M5 Illuminated Reticle Riflescope is equipped with their new Illuminated Tactical Milling Reticle (TMR) pattern. Mil-dots were developed by the USMC in the late 1970s to assist Marine Corps snipers in estimating distances. It is now the standard reticle pattern with all branches of the US Armed Forces. The term "mil-dot" comes from "mil"--a unit of angular measurement used in artillery and machine gunnery and equal to 1/6400 of a complete revolution--and the fact that the dots are spaced in mil increments on the crosshairs. It should be made clear that the dots (or lines) themselves are not measured in mil increments, but rather in increments of MOA.
The principle behind Leupold's TMR is to expand on existing mil dot reticle designs by offering users more ranging tools in the form of various sized and various spaced aiming points on the horizontal and vertical stadia lines. This permits greater ranging and shooting precision than all previous range estimating reticle systems. The TMR reticle subtends exactly like all existing mil dot reticles and variations thereof, but with greater accuracy. Aside from mil hash marks, the TMR reticle offers areas of 0.2-mil subdivisions to precisely measure the common one-meter target height from 500 to 1,000 meters and beyond. This has previously been the most difficult task in long-range shooting, since this entire range lies in the span between one and two mils. The positions of the 0.2-mil subdivisions are intentionally placed on the periphery of the fine crosshair in order to keep the central area clutter-free. All existing mil dot calculations and formula tools are compatible with the Leupold TMR system.
The Leupold Mark 4 8.5-25x50mm LR/T M5 Illuminated Reticle Riflescope was attached to the 12 o'clock MIL-STD-1913 rail interface of the KAC SR-15E3 IWS SBR Carbine by means of a GG&G Accucam Quick-Detach MIL-STD-1913 Scout Rail (GG&G, Dept. SGN, 3602 East Stravenue, Tucson, AZ 85713, phone: 1-800380-2540; fax: 520-748-7583; E-mail: firstname.lastname@example.org; website: www.gggaz.com). This quick-detach rail raises the line of sight by a half-inch. Designed for a wide variety of optical sights, its integrated Accucam Quick-Detach lever system provides the operator the option to quickly utilize other optical devices. Its rail is machined from solid billet 6061 T6 aluminum alloy with a Type III hard coat anodized matte black MilSpec finish, its tension on the rifle's rail can be adjusted and it provides zero repeatability of 1/2 MOA. The Accucam mechanism itself is machined from solid billet 4140 steel and manganese-phosphated matte black to MilSpec. The price is $158.95.
The Leupold Mark 4 8.5-25x5Omm LR/T M5 Illuminated Reticle Riflescope is a great piece of glass, but too much magnification for breaking down doors and dynamic entries in the barrio with a 5.56x45mm tactical rifle equipped with a relatively short barrel. So, after the accuracy portion of our test and evaluation, we installed a Leupold Mark 4 1-3x14mm Close Quarter/Tactical (CQ/T) Scope, which was specifically designed for rifles in the M16/AR-15 series and combines the strengths of a red dot sight and variable-power scope. The clear, bright Leupold Circle Dot illuminated reticle provides an outstanding aiming point for the operator, with instant target acquisition in close, urban combat environments. There are ten illumination settings, including two compatible with night vision devices, without overwhelming the operator's natural, low-light vision. One AA battery powers the unit for up to 600+ hours at the medium setting. At 1X, the CQ/T Scope functions as a non-magnifying, illuminated sight for tactical applications at extremely close ranges. Targets at medium ranges can be successfully engaged when the scope is powered up to 2X or 3X. Butler Creek flip-up lens covers, the Mark 4 CQ/T flat top mounting bracket, and a carry handle mounting stud are all included.
The elevation and windage adjustment markings include 0.5 MOA clicks. The linear field of view at 100 meters is 37.5 meters at high magnification and 13.9 meters at low magnification. The weight is only 17.5 ounces (496 grams), with an overall length of 8.8 inches (22.4 cm). The all important eye relief is 2.8 to 2 inches (71 to51rnm). Both the elevation and windage adjustments have a range of 90 MOA. The manufacturer's suggested retail price for the Leupold Mark 4 CQ/T scope is $1,124.99, but it typically sells for about $900. It is being fielded by special operations personnel in Afghanistan. This is a superb match with the KAC SR-15E3 IWS SBR Carbine.
Test and Evaluation
With a 1:7 twist, the greatest inherent accuracy with rifles like the KAC SR-15E3 IWS SBR Carbine will be obtained by the use of bullets weighing 60 to 77 grains. Our test and evaluation from the bench with the Leupold Mark 4 8.5-25x5Omm LR/T M5 Illuminated Reticle Riflscope was conducted using ammunition provided by Hornady Mfg. Co. (Dept. SGN, P.O. Box 1848, Grand Island, NE 68802-1848; phone: 800-338-3220; website: www.hornady.com).
We used the Hornady 75-grain .223 REM TAP (Tactical Application Police), (catalog #80265) which has a Boattail Hollow Point (BTHP), match-grade projectile for our accuracy tests. Out of 14.5-inch rifling, Hornady's 75-grain projectile provides a muzzle velocity of approximately 2518 fps. The total penetration in tissue simulant is 11.75 inches with only 37.4% fragmentation and a retained weight of 37.4 grains.
The accuracy results we obtained out of the KAC SR-15E1 IWS 14.5-inch rifling were more than a little startling. The Hornady 75-grain .223 Rem. TAP shot to 0.7 moa at 100 meters. This is really outstanding for SBR-length rifling.
I especially like the Hornady 75-grain TAP load, which has a match-grade BTHP bullet that is Hornady's heaviest TAP offering in 5.56x45mm NATO. It demonstrates rapid expansion and excellent fragmentation. It provides deeper penetration than the 55- and 60-grain bullets, yet penetrates less than most police handgun service rounds. It penetrates glass with minimal deflection due to its retained weight.
This bullet exhibits minimal breakup on sheetrock, retaining most of its weight and penetration. The ballistic coefficient of this boattail hollow point is .390.
The Endless Controversy
After 35 years in the firearms industry, it's my honest observation that the screaming and shouting, pushing and shoving about direct impingement gas operation versus short-stroke, piston-operated AR-type rifles has been mostly generated by Internet blogs and popular gun press writers with both groups generally supporting short-stroke piston operation to the same degree the mainstream media supports Democrats.
While the Internet is to begin with a terrible place to get accurate information about anything, most of the individuals from both of these sectors have less time in anyone's military than I have in a U.S. Army pay line, let alone in actual combat on the battlefield.
Most authorities have agreed that the M16 series, as originally fielded, operates by means of direct impingement gas operation, which eliminates the conventional gas cylinder, piston and operating rod assembly. Simply put, this means that the high pressure propellant gases moving up through a port in the barrel just prior to the bullet leaving the muzzle, pass into the gas plug (or "block") and then down a tube to "impinge" directly upon the bolt carrier and start the recoil stroke of the reciprocating parts.
Conversely, in a more conventional short-stroke gas piston design, such as the FN FAL, gases'moving up the barrel's vent into the gas block, strike against a piston, either separate from or connected to an operating rod or slide, at the end of which is the bolt carrier holding the bolt group.
Before we discuss the Merits and/or disadvantages of either of the above methods of operation, we need to examine the point that some do not even agree that the M16 series operates by means of "direct gas impingement." A few Internet "experts" have argued that the M16 series operates by means of a "bleed-off and expansion" system, as opposed to the direct impingement operation found in the Swedish Automatgevar m/42 (Ag m/42) Ljungman and French MAS 1944, 1949 and 194956 infantry rifles.
In other words, instead of impinging against a flat surface on the front of the bolt carrier (or more accurately, in both of the latter cases a cup at the front end of the bolt carrier into which the rear end of the gas tube projects), the propellant gases traveling down the gas tube in the M16 enter an expansion chamber, called a "gas key", with excess gas bleeding off through gas vents located in the side of the bolt carrier and also when the gas tube separates from the gas key at the commencement of the recoil stroke.
Wow, this kind of semantic sorcery is all too common on the Internet and apparently propagated most often by those with too much spare time on their hands. Yes, there is indeed a slight difference between the MI6's gas key on top of the carrier and the gas cup on the front of the Ljungman and MAS44/49/49-56 bolt carriers. And, further, it is argued, Eugene Stoner himself stated in the patent application for the AR-15 that, "This invention is a true expanding gas system rather than the conventional impingement system."
The semantic confusion arises because of what Stoner, an engineer and not a wordsmith, was referring to by an "impingement system" was actually the usual short-stroke gas piston system, where the propellant gases impinge against a piston face rather than moving down a long gas tube and into the small expansion chamber provided by the gas key that he placed on top of the carrier.
So, maybe it would actually be more correct to say "internal piston" for direct gas impingement and "external piston" for short-stroke piston operation. But, we're stuck with the terminology in vogue and need to move beyond semantic pettiness.
In my opinion, there are a number of substantial reasons to believe that direct impingement gas operation can actually produce a superior weapon system. I can already envision the gnashing of teeth and sprinkling of ashes by piston proponents.
But, in general and before we get into the details, direct gas impingement weapons weigh less, have fewer components, are configured to operate with the most widely varied bolt designs, have significantly less recoil impulse, have greater accuracy potential, and most often have a longer lock-up time, which results in a cleaner chamber, and reduced stress and wear on the bolt's components.
However, in all fairness, when barrel lengths of less than 14.5 inches are employed, unless you want to use a "coiled" gas tube, the direct gas impingement system is not quite as reliable as short-stroke piston operation because there less retainable pressure after the projectile has passed by the gas port and out the muzzle. But, even the original Para FN FAL barrels proved to be too short for reliable operation.
While a direct impingement gas system has fewer components, it still contains an internal piston. In theory, the propellant gases are the main driving force moving the bolt rearward and thus the bolt group can be thought of as a sort of piston. In a short-stroke, piston-operated rifle the propellant gases are contained within the piston, which, in turn drives the bolt and carrier rearward much like the pistons in a gasoline engine.
As a result, in this latter case an extra component has been placed within the system that is also filled with propellant gases, carbon fouling and debris. This additional component causes short-stroke, piston-operated rifles to be somewhat heavier.
When examining short-stroke piston-operated M16/AR-15 configured rifles we find that most have taken Eugene Stoner's envelope and internal arrangement and simply inserted their piston system into this pre-existing package. In other words, we find the same buffer system, the same timing, and the same geometric arrangement of the bolt carrier, only with the piston system added.
Stoner designed his system to have gas physically blown into the carrier, which would thrust the bolt forward and the carrier rearward, with less pressure applied to the backside of the bolt's locking lugs than occurs in a short-stroke piston system.
When struck by a piston, the bolt carrier tilts within the receiver, not only inhibiting the bolt carrier's movement, but in addition applying non-parallel forces to the assembly and the receiver. Some manufacturers of short-stroke, piston-operated rifles have acknowledged this problem and have engineered solutions to solve it. It should also be mentioned that the force of a piston striking the carrier and is most often perceived by the operator as a slight increase in the recoil impulse.
In a short-stroke piston-operated weapon, the reciprocating mass above the barrel and in a sense attached to it results in movement of the barrel and somewhat diminished accuracy potential. Neither the FN FAL system, which almost always produces group dispersion with pronounced "vertical stringing," nor the Kalashnikov series are noted for match-grade precision.
That being said, both the FN FAL and Kalashnikov were and are hugely successful weapon systems. At most I think all that can be conceded is that perhaps short-stroke, piston operation is not best suited for Stoner's M16/AR-15 envelope.
L The MI6's Antecedents
Erik Eklund of the AB C.J. Ljungmans Verkstader Company of Malmo, Sweden designed the 6.5x55mm; Automatgevar m/42 rifle in approximately 1941. Se; ries production commenced at the Carl Gustafs Stads Gevarsfaktori in Eskilstuna in 1942. A total of only 30,000 rifles were manufactured for the small Swedish army; as the standard issue rifle for the Swedish armed forces remained the superbly made m/96 Mauser boltaction rifle, also chambered for the 6.5x55mm cartridge.
A small number of Norwegian military police trained with the Ag m/42 in Sweden during World War II and took them back to Norway when the Germans departed 7 in 1945. No other country ever adopted the Ljungman. After a number of serious deficiencies were noted, including most prominently corrosion inside the gas tubes, the entire Ag m/42 inventory in Sweden was altered from 1953 to 1956 and the modified rifles were re-designated as the Ag m/42B. The modifications included a stainless steel gas tube, two retracting knobs on the breech cover, a new elevation knob on the rear sight, a new cleaning rod, a rubber empty-case deflector and redesigned magazines. The Ljungman rifle was eventually replaced by a version t of Heckler & Koch's caliber 7.62x51mm NATO G3 rifle called the Ak4 in the early 1960s.
The Ljungman has a tilting breechblock of the type similar to the Soviet Tokarev SVT38/40 semiautomatic rifle series of the World-War-II-era and the Belgian FN FAL series. The camming lugs on bolts of this type are up. in the cam-shape notches in the undersides of the carrier.
As the carrier is pushed forward by the recoil spring, the engagement of the camming lugs in the notches of the carrier carry the bolt forward. During the last part of forward motion of the carrier, the camming notches in the carrier act on the camming lugs on the bolt body to force the rear end of the bolt down into the bottom of the receiver where the locking surface at the bottom rear of the bolt engages the locking surface in the bottom of the receiver. When the rifle is fired and the bolt carrier is forced to the rear, the above cycle is reversed.
While the Ljungman's 10-round, two-position-feed, staggered-column magazine is detachable, it was usually loaded while in place from the top with the bolt retracted by means of five-round stripper clips. Like the Soviet SVT38/40 and British SMLE rifles, the magazine was usually only removed for cleaning.
Sweden established a manufacturing facility in Egypt and with the same machinery used to manufacture the Ag m/42B, began serial production of the Hakim rifle, which was chambered for the 7.92x57mm cartridge. The Hakim was eventually totally redesigned and the result was an unusual carbine called the Rasheed, which was chambered for the 7.62x39mm ComBloc round, as the Kalashnikov series was coming into Egyptian service.
The Hakim was produced during the 1950s and 1960s. It differs from the Ljungman not only in caliber, but in that its gas system can be adjusted by use of a special tool on a rotating valve at the front of the gas tube that protrudes through the top of the rifle's upper handguard.
Extreme caution must be exercised when bring either the Ljungman or Hakim today. There are numerous reports of these rifles literally self-destructing when fired with incorrect ammunition. Even when fielded by the Swedish armed forces, military 6.5x55mm ball ammunition was usually lightly lubricated by the troops to facilitate the recoil and counter-recoil cycles and empty case extraction, as the propellant's burn rate was reportedly too slow. If the propellant was a slow burning type, the bolt carrier could open both prematurely and violently, with excessive chamber pressure.
This, in turn, could cause the extractor claw to rip away the case's rim and result in dangerously high pressures flowing downward into the magazine well and subsequently blowing the magazine out of the rifle, most often vaporizing both the magazine and stock. Use 6.5x55mm ammunition that you have tested first in a Swedish Model 1896 Mauser turn-bolt and always lubricate the cases. (I use a light coating of Carnauba-type car wax.) Caliber 7.92x57mm cartridges are even more dicey as much World-War-II-era ammunition in this caliber as gone south and can be dangerous in any firearm.
From the Hakim was developed the rare Rasheed carbine, of which only a total of 8,000 were manufactured in 7.62x39mm. Outwardly resembling the SKS carbine, the Rasheed was designed by Erik Eklund, the same Swedish engineer who originally designed the Ljungman rifle and subsequently the Hakim.
The Rasheed's most distinctive external characteristic is a folding blade-type bayonet almost identical to that of the Soviet SKS. The 12-inch blade rotates on an attaching mount under the barrel and rests in a recessed groove in the lower handguard. Gas adjustment on the Rasheed is identical to that of the Hakim. The Rasheed's retracting handle, shaped like that of the SKS, is on the right side of the action. Currently, a Rasheed in excellent condition sells for $800 to $900. Thus, although rare, so is leprosy, and very few want that, either.
The French MAS 1944, 1949 and 1949-56 are another example of operation by means of direct. impingement gas operation. The MAS44/49/49-56 series of rifles, all chambered for the French 7.5x54mm cartridge, used also in the Chatellerault Model 1924/29 light machine gun, had a long developmental history.
The first use of a directimpingement gas system was the French experimental Rossignol B5 rifle, which was designed more than a century ago in 1901. The MAS 1944 was derived from. the prototype MAS 38/39, which was developed secretly by Manufacture d'Armes de Saint-Etienne during the German Occupation and was fielded as the MAS 40 in March of -1940 in very limited quantities.
The subsequent MAS 1944 rifles Saw a great deal of ground combat in the final stages of the First Indochina War, as well as .the opening stages of the Algerian War' of Independence and the Suez Canal Crisis (1956). The entire MAS 1944, 1949 and 1949-56 series of rifles are locked breech With a tilting bolt. The bolt is mounted in bolt carrier that _cams the rear end of the bolt body down against a locking shoulder in the receiver.
Approximately 6,200 Fusil Automatique MAS 1944 rifles were produced, most of them going to French Marine Commandos in Indochina. It uses the same two-piece stock and reversible spike bayonet as the bolt-action MAS 1936. This entire semiautomatic rifle series uses the same 10-round, two-position-feed, staggered-column, detachable box-type magazine. The Model 1949 incorporated further improvements, including an integral rifle-grenade-launcher.
In 1957, the final version of the MAS 44/49 series was introduced. Designated as the MAS 1949-56, it incorporated lessons learned from the ultimate classroom, the battlefields of Algeria, Indochina and the Suez Canal. The rifle was shortened and lightened, with more of the barrel exposed, to meet the Mission.Essential Need Statement (MENS) of modern ground warfare including the requirements of air mobile, mechanized and airborne troops.
A bayonet that also served as both a utility and fighting knife replaced the 19th Century spike bayonet. A combination rifle grenade launcher/muzzle compensator for standard ballistite-fired, NATO 22mm rifle grenades replaced the MAS 1949 integral rifle grenade launcher. Production of the MAS 1949/56 ended in 1980 when it was replaced by the caliber 5.56x45mm NATO FAMAS bullpup, aka "the unmusical bugle" to French troops.
What conclusions can be drawn, if any, about the combat record of these two direct impingement gas system infantry rifles? In the case of Erik Eklund's Ag m/42B, Hakim and Rasheed rifles, very little it appears, as Sweden has maintained outward neutrality while secretly supporting socialist causes for decades. Egypt's combat track record in the 1950s. and 1960s when Israel was the devil was dismal to say the least and their two direct impingement gas system rifles were apparently not a factor on the desert battlefield.
But, the French MAS 1944, 1949 and 1949-56 rifles are a different story entirely, one quite embarrassing to those who so relish bashing the MI6's method of operation unmercifully 24/7. These French direct impingement gas system infantry rifles were battle proven in some of the harshest environmental conditions in some of the cruelest combat engagements of the 20th Century. Keep in mind that the MAS direct impingement design reduced the number of reciprocating parts in the bolt group to only six: the bolt carrier, the bolt body, the extractor, ejector, firing pin and recoil spring. It takes only seconds to disassemble the bolt mechanism for maintenance.
The MAS 1949.. and 1949-56 earned a well-deserved, reputation for.: total reliability in the most adverse environments with inadequate cleaning, often no more than filthy rags and dirty Motor oil. Ruggedly built, they performed soundly in brutal fighting from the triple canopy tropical rain forests of Indochina (1950 to 1954) to the arid -regions of Algeria (1954 to 1962) and in 1961 during the Battle of Bizerte in Tunisia. The Renal troops accepted them with few complaints and no whining. There Were. apparently no "gun writers" in La Legion etrangere.
The MAS 1949-56 was also tested in caliber 7.62x51mm NATO in France and approximately 150 were produced, but never issued. In addition, because French 7.5x54mm ammunition is expensive and difficult to locate, when the MAS 1949-56 rifle was finally imported in substantial quantities to the United States by Century Arms International, Inc., a significant number were converted to caliber 7.62x51mm NATO.
The conversions were poorly executed and as the port pressures of the 7.5x54mm and 7.62x51mm cartridges are substantially different, operation was unsatisfactory with an unacceptable number of stoppages and misfires. My advice is to avoid these converted MAS 1949-56 rifles altogether.
KAC SR-15E3 IWS SBR CARBINE SPECIFICATION Caliber: 5.56x45mm NATO (.223 REM). Method of Operation: Locked-breech, operation by means of direct gas impingement; semiautomatic-only, fires from the closed-bolt position; bolt retraction on top of the upper receiver. Feed System: 20-, 30-, 60-, and 100-round, two-position-feed, staggered-column, detachable box-type magazines. Weight: 6.6 pounds (3 kg), empty. Length, Overall: 36 inches (914mm) with the stock fully extended and 33 inches (838mm) with the stock fully collapsed. Barrel Length: 16 inches (406mm) with MAMS muzzle device permanently attached. Barrel: Ball Mill Lightened (dimpled), cold hammer forged, six-groove rifling with a right-hand rate of twist of one turn in 7 inches. Finish: Black hard coat anodizing. Furniture: LMT SOPMOD buttstock and M16A2-type grip assembly. Manufacturer: Knight's Armament Company (KAC), Dept. SGN, 701 Columbia Boulevard, Titusville, FL 32780; phone: 321 -607-9950; fax: 321-268-1447; website: www.kntghtarmco.com. Optical Sights: Leupold & Stevens, Inc., Dept. SGN, P.O. Box 688, Beaverton, Oregon 97075-0688, phone: 503-646-9171; fax: 503-526-1475; website: www.leupold.com. Quick-Detach MIL- GG&G, Dept. SGN, 3602 East Stravenue, STD-1913 Tucson, AZ 85713, phone: 1-800-380-2540; Scout Rail: fax: 520-748-7583; E-mail; email@example.com; website: www.gggaz.com. Tactical Slings: Blue Force Gear, Inc., Dept. SGN, P.O. Box 853, Pooler, Georgia 31322; phone: 1-877-430-2583; fax: 912-964-7701; website www.blueforcegear.com. M16/AR-15 Carbon Magna-Matic Defense division of Removal Tool: Magna-Matic Corporation, Dept. SGN, W4599 County Road IW, Waldo, WI 53093; phone: 920-564-2366 or 800-328-1110; fax: 920-564-2368; email: firstname.lastname@example.org; website: www.magna-matic-defense.com. MSRP: $2,625 (when assembled as described) complete with one 30-round magazine and a set of 12 o'clock emergency, flip-up iron sights and a KAC operator's and armorer's manual for Stoner SR-15E3 rifles and carbines, The upper receiver assembly alone (KAC Product Number 30355) with a Ball Mill Lightened barrel sells for $1,875. The SR-15 lower receiver assembly alone (KAC Product Number 25780) costs $750. Ammunition: Hornady Mfg. Co., Dept. SGN, P.O. Box 1848, Grand island, NE 68802-1848; phone: 800-338-3220; website: www.hornady.com. Weather Instrumentation: Kestrel, Dept. SGN, Nielsen-Kelierman, 21 Creek Circle, Boothwyn, PA 19061; phone: 610-447-1555 or 800-784-4221; fax: 610-447-1577; e-mail: kes email@example.com; website: www.kestrelweather.com. T&E Summary: Loaded with exceptional features such as the URX 3.1 rail system, a hammer forged, chrome-lined, Ball Mill Lightened barrel, the innovative E3 bolt group, ambidextrous controls, a two-stage match-grade trigger mechanism, LMT SOPMOD butt-stock and tactical latch retracting handle and the optional MAMS muzzle brake. Finest quality direct gas impingement AR-15-type rifle ever tested, bar none--really hot ticket and absolutely recommended without reservations of any kind.
Text and photos by Peter G. Kokalis
|Printer friendly Cite/link Email Feedback|
|Author:||Kokalis, Peter G.|
|Article Type:||Company overview|
|Date:||Jan 1, 2013|
|Previous Article:||Promises on gun control action.|
|Next Article:||Iver Johnson PAS-12 RG-R/C shotgun: here's a lightweight home-defense shotgun that breaks down into a small package for travel or preparedness.|