Two robots on one beam.A new system of two servo An electromechanical device that uses feedback to provide precise starts and stops for such functions as the motors on a tape drive or the moving of an access arm on a disk. robots mounted on a single traverse traverse - traversal beam is aimed at two-shot molding or parts-handling tasks inside and outside of the mold. The system was introduced by the Japanese parent of Yushin America Inc., Cranston, R.I., at the recent Platex show in Osaka. Its new RA II-[alpha]-150-DW (Double-Wing) is designed for presses from 220 to 550 tons and features two three-axis robots, each with 11-lb payload (1) Refers to the "actual data" in a packet or file minus all headers attached for transport and minus all descriptive meta-data. In a network packet, headers are appended to the payload for transport and then discarded at their destination. capacity and pneumatic pneumatic /pneu·mat·ic/ (noo-mat´ik) 1. pertaining to air. 2. respiratory. pneu·mat·ic adj. 1. Of or relating to air or other gases. 2. wrist flip. A sprue sprue, chronic disorder of the small intestine caused by impaired absorption of fat and other nutrients. Two forms of the disease exist. Tropical sprue occurs in central and northern South America, Asia, Africa, and other specific locations. picker with each robot provides a total of eight axes of motion. Users can program both robots to move in and out of the mold simultaneously, or one robot can retrieve a part from the mold and hand it off to the second robot for transport outside the molding area. The robots have traverse strokes of 1400 or 1500 mm, vertical stroke of 850 mm, and strip stroke of 508 or 578 mm. Both robots are programmed from a single controller with new software that prevents collision and displays information on both robots on one screen. Tel: (401) 463-1800. www.yushin.conl [ILLUSTRATION OMITTED] |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion