Twin screw feeder. (Literature Equipment).The company's twin screw feeder is designed for the most precise batching and weighing applications, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. this two-page bulletin. The unit incorporates two helixes on one hopper, providing a compact design where multiple individual screw units will not fit in the alotted available space. The 1-1/2" and 4" diameter helixes are said to offer both fast, high-volume filling and precise dribble flow at the end of the batch cycle. The 18" x 22" hopper inlet inlet /in·let/ (-let) a means or route of entrance. pelvic inlet the upper limit of the pelvic cavity. thoracic inlet the elliptical opening at the summit of the thorax. is fitted with air pads and an on/off pulse timer to ensure positive, uninterrupted flow to the helixes. Regreasable lubricated lu·bri·cate v. lu·bri·cat·ed, lu·bri·cat·ing, lu·bri·cates v.tr. 1. To apply a lubricant to. 2. To make slippery or smooth. v.intr. To act as a lubricant. bearings with air-purged shaft seals are said to prevent any product leakage from the rear of the unit. The helixes are rated at 17 cu. ft. per hour and 283 cu. ft. per hour, respectively, at maximum rpm, assuming a 100% efficient conveyable product and no slippage Slippage The difference between estimated transaction costs and the amount actually paid. Notes: Slippage is usually attributed to a change in the spread. See also: Spread, Transaction Costs Slippage . (Bulk Equipment Systems Technology, 1071 Industrial Parkway North, Brunswick, OH 44212) Circle 109 on card |
|
||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion