Trim press.The Hy-Pro trim press, highlighted in this two-page, four-color bulletin, is said to be specially designed to propel pro·pel tr.v. pro·pelled, pro·pel·ling, pro·pels To cause to move forward or onward. See Synonyms at push. [Middle English propellen, from Latin the company's gang trim dies. The machine frame features an open front to back design to allow the sheet of rubber to be moved easily during trimming. The bolster This article is about the pillow called a bolster. For other meanings of the word "bolster", see bolster (disambiguation). A bolster (etymology: Middle English, derived from Old English, and before that the Germanic word bulgstraz plate and crown of this press are 6" and 5" thick, respectively. These hold the dies parallel during punching, reducing die wear, according to according to prep. 1. As stated or indicated by; on the authority of: according to historians. 2. In keeping with: according to instructions. 3. the literature. The standard machine is designed for basic hand feeding of rubber parts. This machine is offered with automation, such as a flip-up tray, rotary table A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. , automatic part removal, and can be robotically operated. As many as three stages of trimming procedures can be completed on one die. Mass inspection of press heats allows parts to be trimmed and packed without loss of time. (Altman Manufacturing) www.altmanmfg.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion