Toughened adhesive for high-temperature plastics.A new toughened, one-component, heat-curing epoxy adhesive and sealant is designed for high-temperature plastics, including PPO PPO abbr. preferred provider organization PPO Managed care Preferred provider organization, see there Infectious disease Pleuropneumonia-like organism, see there , PPS (Packets Per Second) The measurement of activity in a local area network (LAN). In LANs such as Ethernet, Token Ring and FDDI, as well as the Internet, data is broken up and transmitted in packets (frames), each with a source and destination address. , and nylons. EP17 compound from Master Bond, Inc., Hackensack. N.J., has a service-temperature range of-300 F to +600 F. It cures in 60 to 90 min at 300 to 350 F. It is said to be resistant to a wide range of chemicals, including fuels, acids, bases, oils, and many solvents. It also boasts very low shrinkage on cure and easy machinability. Tensile strength tensile strength Ratio of the maximum load a material can support without fracture when being stretched to the original area of a cross section of the material. When stresses less than the tensile strength are removed, a material completely or partially returns to its is 8400 psi, tensile modulus is 387,000 psi, and compressive strength Compressive strength is the capacity of a material to withstand axially directed pushing forces. When the limit of compressive strength is reached, materials are crushed. Concrete can be made to have high compressive strength, e.g. is above 13,000 psi. EP17 is a flowable paste in a standard gray color. Tel: (201) 670-6178 * PTDirect: 715QV [ILLUSTRATION OMITTED] |
|
||||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion