The word is out.Upon returning from your deployment, service your binoculars at the normally scheduled six-month intervals like it says in TM 11-5855-263-23&P and TM 11-5855-313-23&P. Maintenance can be performed only by an authorized AVIM, AASF, ASF See Windows Media formats. 1. (language) ASF - Algebraic Specification Language. 2. (body) ASF - Analytical Solutions Forum. , or LAD shop. Do not ship the ANVIS ANVIS Aviator's Night Vision Imaging System to unauthorized maintenance facilities claiming to perform RESET, or to people who are not properly trained to perform maintenance. The only authorized ANVIS maintainers are listed in GEN-06-0-02. ANVIS returned from unauthorized 'RESET' teams have had maintenance performed without being documented. Other problems have included improper collimation collimation /col·li·ma·tion/ (kol?i-ma´shun) 1. in microscopy, the process of making light rays parallel; the adjustment or aligning of optical axes. 2. , no purging and incorrect zero diopter Diopter A measure of the power of a lens or a prism. The diopter (also called dioptrie) is usually abbreviated D. Its dimension is a reciprocal length, and its unit is the reciprocal of 1 m (3.28 ft). settings and infinity focus. Doin' your own maintenance on binoculars must stop! Any ANVIS turned into an unauthorized program must be reinspected by a qualified inspector to ensure the -10/20 standards are met. Pages 35-37 of PS 643, June 2006, tells you what you can--and cannot--do to take care of your ANVIS. But there are a few changes since that article was published. The objective lens and eyepiece Eyepiece A lens or optical system which offers to the eye the image originating from another system (the objective), at a suitable viewing distance. The image can be virtual. assemblies should not be loose but have free movement. Update TM 11-5855-263-10 and TM 11-5855-313-10 with pen and ink executed or done with a pen and ink; as, a pen and ink sketch s>. See also: Pen changes from GEN-06-ASAM-02. When performing the power pack test, attach or update the gummed label. NSN 7530-01-514-4913, with the due date for the next inspection like it says in TM 11-5855-263-23&P and TM 11-5855-313-23&P. Make a note until all chances to the TMs are updated. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion