Table manners.The TR160Y is a compact dual-axis trunnion trun·nionn. A pin or gudgeon, especially either of two small cylindrical projections on a cannon forming an axis on which it pivots. [French trognon, stump.] rotary table A rotary table is a precision work positioning device used in metalworking. It enables the operator to drill or cut work at exact intervals around a fixed (usually horizontal or vertical) axis. designed to mount in the Y direction--front to back on the table--of a mid-size VMC See VESA Media Channel. . At less than 25" wide and only 19" deep, the TR160Y fits on one end of the machine's table, freeing up the remainder for additional fixtures or vises. The TR160Y has a 160mm T-slot platter, and will swing parts up to 7.5" diameter. The trunnion provides [+ or -] 120[degrees] of tilt and 360[degrees] of rotation for full simultaneous 5-axis motion, or to position parts to almost any angle for machining. Haas Automation Founded in 1983, Haas Automation is one of the largest machine tool builders in the World. Haas Automation manufactures CNC vertical and horizontal machining centers, CNC lathes, rotary tables and 5C indexers. Haas Automation headquarters are in Oxnard, California. [ILLUSTRATION OMITTED] www.rsleads.com/905mn-241 |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion