TWO-STAGE MACHINES.

TWO-STAGE MACHINES


                           Clamp Unit

        Injection
Clamp   Capacity                           Max.       Clamp
Force,                     Configuration;  Daylight,  Stroke,
tons    oz         cu in.  Type [a]        in.        in.

5       0.3        -       H;T             2.7        22
27.5    0.9        1.6     H;HM            15.1       9.5
30      0.4        0.7     V;HM            12.7       7.8
        0.8        0.7     V;HM            12.7       7.8
        1.3        2.3     V;HM            12.8       7.8
        2.5        2.3     V;HM            12.8       7.8
        2.5        2.3     V;HM            12.8       7.8
55.1    1.7        3       H;HM            17.7       11.8
88.2    3          5.4     H;HM            20.1       13.8
126     8.4        15.5    H;HM            -          12.9
150     9.2        15.2    V;H             23         15
        18.5       30.5    V;H             23         15
165.4   8.5        15.3    H;HM            24.8       16.9
166     16.9       31      H;HM            -          16.5
200     5.5        9.2     V;H             23         15
        9.2        15.2    V;H             23         15
        18.5       30.5    V;H             23         15
225     9.6        17.5    H;HM            42.1       36.2
242     22.9       45      H;HM            -          9.6
275     123        226     H:T             49.6       24
330     35.2       _       H;HM            65.9       -
440     35.2       _       H;HM            73.8       -
550     35.2       _       H;HM            89.6       -
        56.3       _       H;HM            89.6       -
        200        366     H;T             61.5       33
770     282        518     H;H             88.58      30



                              Injection Unit
                      Clamp                              Injection
        Clearance     Speed                   Injection  Speed
Clamp   Between       Fast    Plasticating    Pressure   (max),
Force,  Tie Rods      Close,  Capacity, [c]   (max),     cu in./
tons    (H x V), in.  ipm     lb/hr           psi        min

5       4 x _         -       6               10000      -
27.5    10.2 x 10.2   1134    39.7            37000      420
30      10 x 10       -       -               42670      -

        10 x 10       -       -               42670      -
        16.5 x 11.8   8       35              33950      -
        16.5 x 11.8   -       -               33400      -
        16.5 x 11.8   -       35              33950      -
55.1    12.2 x 12.2   1039    77.2            36600      672
88.2    14.2 x 14.2   1316    110.2           32700      876
126     12.5 x 12.5   -       -               14012      -
150     22 x 12       480     -               20000      -
        22 x 12       480     -               20000      -
165.4   20.5 x 20.5   945     133.4           31900      1386
166     15.7 x 15.7   -       -               14455      -
200     36 x 26       480     -               25000      -
        36 x 26       480     -               25000      -
        42 x 30       480     -               25000      -
225     22.4 x 22.4   -       -               22700      1320
242     17.7 x 17.7   -       -               14750      -
275     25 x 25       720     677             25375      2321
330     28.3 x 28.3   -       -               32000      -
440     32.3 x 32.3   -       -               32000      -
550     36.2 x 36.2   -       -               32000      -
        36.2 x 36.2   -       -               32000      -
        36 x 34       640     1371            25375      5600
770     37 x 40       563     1742            25375      6070




                                              See
                                              Ad/Data
Clamp   Motor                                 Sheets,
Force,  Hp     Model                          Page
tons    (max)  Designation    Manufacturer    No.

5       -      7/50           MCP Equipment   -
27.5    10     TR25S2         Sodick          -
30      5.5    S2-40/30       Sadaplast       -
        5.5    S2-40/30
        7.5    SR3-T-5530
        7.5    SRS-55/30
        7.5    SR3-T-5530
55.1    8      TR50S2         Sodick          -
88.2    20     TR80S2
126     18.7   Transvith/110  Monza           -
150     40     WP150/250      Wabash          -
        40     WP150/500
165.4   40     TR150S2        Sodick          -
166     30     Transvith/160  Monza           -
200     30     WP200/150      Wabash          -
        40     WP200/250
        50     WP200/500
225     50     Maxima 225     Milacron        10/_
242     38.8   ggansvith/220  Monza           -
275     120    P32-110        SIG Corpoplast  -
330     -      GL330 P85/67   Husky           -
440     -      GL440 P85/67
550     -      GL550 P85/67
        -      GL550 P100/80
        270    P72-140        SIG Corpoplast  -
770     300    P96-150        SIG Corpoplast  -


(a)Configuration: H--Horizontal, V--Vertical; Type: H--Hydraulic,
T--Toggle, HM--Hydromechanical, E--All-Electric clamping and injection.

(c)For screw machines, value for lb/hr is given where applicable for
GP Polystyrene with screw running continuously.