TAPPI Standards, TIPS and Test Methods.NEW OR REVISED TECHNICAL INFORMATION PAPERS(TIPS) AND TEST METHODS Pulping and Paper Production TIPs: TIP 0404-63 Paper machine energy conservation TIP 0404-33 Dryer section performance monitoring TIP 0404-50 Paper machine room ventilation guidelines TIP 0404-39 Dryer surface temperature measurement TEST METHODS: T 653 om-03 Specular spec·u·lar adj. Of, resembling, or produced by a mirror or speculum. spec  u·lar·ly adv.Adj. 1. gloss of paper and paperboard at 20 degrees T 698 cm-03 Determination of wetting tension of polyethylene and polypropylene films and coatings (modified risking analytical technique An analytical technique is a method that is used to determine the concentration of a chemical compound or chemical element. There are a wide variety of techniques used for analysis, from simple weighing (gravimetric) to titrations (titrimetric)to very advanced techniques using ) T 829 om-03 Score quality test T 832 om-03 Water absorption of corrugating medium: float curl method T 838 ore-03 Edge crush test using neckdown T 648 om-97 Viscosity of coating clay slurry slurry, n a thin mixture of insoluble material floating in liquid. slurry solids in suspension. Used as a method of feeding pigs—slurry is pumped through fixed lines and delivered to troughs by hoses equipped with gasoline pump fittings. T 1216 sp-03 Indices for whiteness, yellowness, brightness, and luminous reflectance re·flec·tance n. The ratio of the total amount of radiation, as of light, reflected by a surface to the total amount of radiation incident on the surface. Noun 1. factor T 1215 sp-03 The determination of instrumental color differences Refers to the method of encoding color information in video/TV signals. The color difference signal designations are B-Y and R-Y, Cb and Cr, Pb and Pr, I and Q, and U and V. See YUV and YUV/RGB conversion formulas. T 571 om-03 Diffuse brightness of paper and paperboard (d/0) Call TAPPI's Member Connection Department at +1 800 332-8686 (US), +1 800 446-9431 (Canada) or +1 770 446-1400 for an index or to place an order or go to http://www.tappi.org/index.asp?pid=16148&rc=1&ch= 73_for information on ordering individual copies or full sets of Test Methods and TIPs. NEW TAPPI EDUCATION STANDARD! TAPPI is establishing criteria for accepted practices in continuing education continuing education: see adult education. continuing education or adult education Any form of learning provided for adults. In the U.S. the University of Wisconsin was the first academic institution to offer such programs (1904). and training. This new standard is in response to industry feedback indicating a high degree of variability in quality among providers. If you have an interest in the quality of continuing education and training providers to our industry, TAPPI would like you to review and comment on the proposed standard. Please contact Veranda Edmondson (vedmondson@tappi.org or 770-209-7536) no later than September 15, 2003. |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion