Strong, clear resin for stereolithography.A new epoxy-acrylate stereolithography The first 3D printing technology, which was pioneered by Chuck Hull of 3D Systems. See 3D printing. (SL) photopolymer A photopolymer is a polymer which is cured by exposure to light, often in the ultraviolet spectrum. These polymers are useful in dentistry for fillings and in rapid prototyping in the stereolithography and PolyJet processes. for building transparent models and prototypes boasts high-strength and glass-like clarity. Available from RenShape Solutions Group of Huntsman Advanced Materials, East Lansing, Mich., RenShape SL 7570 has low viscosity. Its flexural flexural pertaining to the flexure of a joint. flexural deformity fixation of joints in flexion. In the newborn called contracted calves or foals. modulus is 360,000 to 405,000 psi; flexural strength is around 14,000 psi; tensile strength is about 8650 psi; and notched Izod impact strength is 0.45 to 0.49 ft-lb/in. The material also boasts the highest HDT HDT Heat Deflection Temperature (plastics) HDT High Dose Therapy HDT Heatpipe Direct Touch (Xigmatek) HDT Heat Distortion Temperature (plastics) HDT Henry David Thoreau (140 F) available for a transparent SL material. Tel: (517) 351-5900 * PT Direct: 413VZ |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion