Steel cord sensor.The company's steel cord sensor for the tire manufacturing industry is said to offer high-precision detection of the steel cords within the rubber substrate The base layer of a structure such as a chip, multichip module (MCM), printed circuit board or disk platter. Silicon is the most widely used substrate for chips. Fiberglass (FR4) is mostly used for printed circuit boards, and ceramic is used for MCMs. . The sensor is said to ensure quality by automatically and precisely cutting the gum edge adjacent to the steel cord. Defects like exposed or missing cords are said to be eliminated. Additionally, the trim system is said to allow the manufacturer to recycle re·cy·cle tr.v. re·cy·cled, re·cy·cling, re·cy·cles 1. To put or pass through a cycle again, as for further treatment. 2. To start a different cycle in. 3. a. the rubber, eliminating raw material waste. The heart of the system is a specialized sensor which utilizes magnetic fields magnetic fields, n.pl the spaces in which magnetic forces are detectable; created by magnetostrictive ultrasonic scalers to cause the tips of instruments such as ultrasonic scalers to vibrate. to accurately detect within [+ or -] 0.2 mm the position of the steel cord during the calendering calendering, a finishing process by which paper, plastics, rubber, or textiles are pressed into sheets and smoothed, glazed, polished, or given a moiré or embossed surface. segment of the manufacturing process. (Nireco America) Circle 109 on card |
|
||||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion