Spray-on mold lube takes high-temperatures.A new PTFE-based spray-on lubricant Lubricant A gas, liquid, or solid used to prevent contact of parts in relative motion, and thereby reduce friction and wear. In many machines, cooling by the lubricant is equally important. for mold components withstands temperatures up to 500 F. The new lubricant from Molders Choice Inc., Solon, Ohio Solon (pronounced Sew-len) is a city in Cuyahoga County, Ohio, and is a suburb of Cleveland in the Northeast Ohio Region, the 14th largest Combined Statistical Area in the United States. As of the 2000 census, the city population was 21,802. , is an alternative to lithium grease, which liquifies at 150 F and can slide off of hot mold components. The new coating is an aerosol spray Aerosol spray is a type of dispensing system which creates an aerosol mist of liquid particles. This is used with a can or bottle that contains a liquid under pressure. When the container's valve is opened, the liquid is forced out of a small hole and emerges as an aerosol or mist. that turns into a thin film. The film maintains its physical properties under load and remains on close-fitting pins and sliders sliders a species of tortoise kept as pets. They have a black shell and a red stripe behind the eye. Called also Chrysemys scripta elegans, red-eared sliders. at high temperatures. It costs less than $6 per can. Tel: (440) 349-6174, www.molderschoice.com |
|
||||||||||||||
Printer friendly
Cite/link
Email
Feedback
Reader Opinion